Eclipse DC1653 15-Channel Wall-Mounted Remote Control User Manual

Konec produktuview

The Eclipse DC1653 is a 15-channel wall-mounted radio remote control designed for convenient and flexible operation of electric full cassette awnings, blinds, and roller shutter motors, particularly those from Dooya. This device allows for smart control directly from your wall, eliminating the need for a handheld remote.

With its 15 channels, the DC1653 provides comprehensive control over multiple shading systems or sensors, ensuring you maintain full oversight and ease of use. It is an ideal solution for modern outdoor living spaces that prioritize smart comfort and reliable automation.

Obrázek: Přední strana view of the Eclipse DC1653 wall-mounted remote control, showing its clean white finish and button layout.

Obrázek: Úhlový view of the Eclipse DC1653 wall-mounted remote control, highlighting its slim profile a integrovaný displej.

Klíčové vlastnosti

• Více kanálů: Features a 15-channel remote control for managing various devices.
• Zdroj napájení: Powered by a CR2450 3 VDC button cell battery.
• Technické údaje: Operates on a frequency of 433.05 - 434.79 MHz.
• Bezpečnost: Designed for an operating temperature range of -0°C to 50°C.
• Efektivní rozsah: Offers a range of 200 meters outdoors and 35 meters through 2 walls.

Nastavení a instalace

The Eclipse DC1653 wall-mounted remote control requires assembly and proper mounting for optimal performance. It is designed for direct wall installation.

1. Vybalení a kontrola

Carefully unpack all components. Verify that all parts are present and undamaged. Refer to the packaging for a complete list of contents.

2. Instalace baterie

1. Najděte přihrádku na baterie na zadní straně jednotky.
2. Otevřete kryt přihrádky.
3. Insert one CR2450 3 VDC button cell battery, ensuring correct polarity (+/-).
4. Bezpečně zavřete kryt bateriového prostoru.

3. Montáž na zeď

Choose a suitable location on a wall, ideally near the awning or roller shutter it will control, and within the effective range. Ensure the surface is clean and dry.

1. Označte si na zdi požadovanou montážní polohu.
2. Use the provided mounting hardware (screws, wall plugs) to secure the mounting plate to the wall.
3. Attach the DC1653 unit to the mounted plate, ensuring it clicks securely into place.

Image: The Eclipse DC1653 wall-mounted remote control shown installed on an exterior wall, demonstrating its discreet integration into a home's facade.

Návod k obsluze

The DC1653 remote control allows for easy operation of your connected Dooya awning or roller shutter systems. Familiarize yourself with the button functions.

Funkce tlačítek

• Channel Selection (+/- buttons): Use the '+' and '-' buttons to cycle through the 15 available channels. The current channel number will be displayed on the screen.
• Up/Open (Up arrow button): Press to extend the awning or open the roller shutter.
• Stop (Circle button): Press to stop the awning or roller shutter at its current position.
• Down/Close (Down arrow button): Press to retract the awning or close the roller shutter.
• Programming Button (Small button, usually recessed): Used for pairing the remote with your Dooya motor. Refer to your motor's manual for specific pairing instructions.

Pairing with Dooya Motors

To control your awning or roller shutter, the DC1653 must be paired with the corresponding Dooya motor. The exact pairing procedure may vary slightly depending on your specific motor model. Generally, the process involves:

1. Ensure the Dooya motor is powered on.
2. Locate the programming button on your Dooya motor (often a small button on the motor head or receiver).
3. Press and hold the programming button on the motor until it enters pairing mode (e.g., a light flashes or the motor jogs slightly).
4. Within a few seconds, press the programming button on the DC1653 wall remote.
5. The motor should respond (e.g., jog again) to confirm successful pairing.
6. Test the Up, Stop, and Down functions to ensure proper control.

Poznámka: For detailed pairing instructions, always consult the user manual provided with your specific Dooya motor.

Údržba

The Eclipse DC1653 wall-mounted remote control requires minimal maintenance to ensure long-term performance.

Čištění

• Wipe the surface of the remote control with a soft, dry, or slightly damp tkanina.
• Nepoužívejte abrazivní čisticí prostředky, rozpouštědla ani agresivní chemikálie, protože by mohly poškodit povrchovou úpravu nebo vnitřní součásti.
• Zajistěte, aby se do zařízení nedostala žádná kapalina.

Výměna baterie

When the display dims or the remote's range decreases, it's time to replace the battery.

1. Otevřete přihrádku na baterie na zadní straně jednotky.
2. Remove the old CR2450 3 VDC button cell battery.
3. Insert a new CR2450 3 VDC battery, observing correct polarity.
4. Přihrádku bezpečně uzavřete.
5. Starou baterii zlikvidujte v souladu s místními předpisy.

Odstraňování problémů

Specifikace

Záruka a podpora

Informace o záruce

Specific warranty details for the Eclipse DC1653 wall-mounted remote control are typically provided at the point of purchase or within the product packaging. Please retain your proof of purchase for any warranty claims.

For information regarding returns or replacements, please refer to the seller's return policy. The current seller, Four & More GmbH, offers a 30-day refund/replacement policy.

Zákaznická podpora

For technical assistance, troubleshooting beyond this manual, or inquiries about your Eclipse product, please contact the manufacturer or your retailer. You can often find contact information on the product packaging or the brand's official webmísto.

As this product is from a small or medium-sized business in Germany, Austria, or Switzerland, support may be available directly through their Amazon brand presence or dedicated customer service channels.

Navštivte Eclipse Store on Amazon pro více informací.