VGR Professional Hair Clippers and Trimmers Set

Zavedení

Thank you for choosing the VGR Professional Hair Clippers and Trimmers Set. This manual provides essential information for the safe and effective use, maintenance, and care of your new grooming tools. Please read these instructions thoroughly before first use and keep them for future reference.

Bezpečnostní informace

Abyste snížili riziko zranění, úrazu elektrickým proudem, požáru nebo poškození výrobku, vždy dodržujte následující základní bezpečnostní opatření:

• Chraňte před vodou: Nepoužívejte tento spotřebič v blízkosti van, sprch,asinnebo jiné nádoby obsahující vodu.
• Do not use while sleeping or unconscious: Ensure you are fully alert and aware during operation.
• Uchovávejte mimo dosah dětí: This appliance is not a toy and should not be handled by children.
• Be cautious when handling sharp blades: Blades are sharp; handle with care to prevent cuts.
• Používejte pouze dodaný nabíjecí kabel a příslušenství.
• Do not disassemble or attempt to repair the appliance yourself. Contact customer support for service.

Obsah balení

Your VGR Professional Hair Clippers and Trimmers Set includes the following items:

• 1 x Hair Clipper (VGR-600)
• 1 x Hair Trimmer (VGR-900)
• 2 x Blade Guards
• 6 x Clipper Guide Combs (various sizes)
• 4 x Trimmer Guide Combs (various sizes)
• 1 x Styling Comb
• 1 x čisticí kartáček
• 1 x nabíjecí kabel typu C
• 1 x mazací olej
• 1 x Holičský plášť

All components included in the VGR Professional Hair Clippers and Trimmers Set.

Vlastnosti produktu

Key features of the VGR Hair Clippers and Trimmers.

• Powerful Motor & Sharp Blades: Both the clipper and trimmer feature a 7000 RPM DC motor and ceramic and stainless steel blades for efficient and smooth cutting.
• LED displej: A clear LED display shows real-time battery status, charging notice, and an oil reminder.
• Nabíjení USB-C: Convenient Type-C fast charging for quick power-ups.
• Dlouhá výdrž baterie: Clipper: 2000mAh battery, up to 200 minutes runtime after 3 hours charge. Trimmer: 700mAh battery, up to 120 minutes runtime after 2 hours charge.
• Průhledný design: Modern transparent grip area allows visibility of internal mechanics.

Powerful motor and sharp blades ensure smooth cutting performance.

Smart LED Battery Indicator for monitoring device status.

Nastavení

1. Počáteční nabíjení

Before first use, fully charge both the hair clipper and trimmer. Connect the Type-C charging cable to the device and a suitable USB power adapter (not included). The LED display will indicate charging status.

• Klipr: Approximately 3 hours for a full charge, providing up to 200 minutes of runtime.
• Zastřihovač: Approximately 2 hours for a full charge, providing up to 120 minutes of runtime.

Charging and operating times for the VGR clipper and trimmer.

2. Připevnění vodicích hřebenů

Select the desired guide comb for your preferred hair length. Align the comb with the blade and push it firmly until it clicks into place. Ensure it is securely attached before use.

Available guide comb lengths for precise cutting.

3. Blade Adjustment (Clipper Only)

The hair clipper features an adjustable taper lever on the side, allowing you to fine-tune the cutting length without changing guide combs. Move the lever up for a shorter cut and down for a longer cut (typically 0.8mm to 2.0mm).

Návod k obsluze

1. Zapnutí/vypnutí

Press the power button located on the device to turn it on. Press it again to turn it off.

2. Používání zastřihovače vlasů

• Ujistěte se, že vlasy jsou čisté a suché.
• Nasaďte požadovaný vodicí hřeben.
• Start cutting from the bottom of the head, moving upwards against the direction of hair growth.
• Use smooth, overlapping strokes for an even cut.
• Adjust the taper lever for blending and fading.

3. Using the Hair Trimmer

• The trimmer is ideal for detailing, edging, and beard trimming.
• Use without a guide comb for a close trim or with a small guide comb for specific lengths.
• Hold the trimmer at a slight angle and use light pressure for precise lines.

Demonstration of using the hair clipper for a haircut.

Údržba

1. Čištění čepelí

After each use, turn off the device and remove the guide comb. Use the provided cleaning brush to remove any loose hairs from the blades and the inside of the device. For a more thorough clean, the blades can be carefully detached and rinsed under running water, ensuring the main body of the clipper/trimmer does not get wet. Dry blades completely before reattaching.

2. Lubricating the Blades

Regular lubrication is crucial for maintaining blade performance and longevity. After cleaning and drying the blades, apply 1-2 drops of the included lubricating oil to the teeth of the blades. Turn on the device for a few seconds to distribute the oil evenly. Wipe off any excess oil.

3. Skladování

Store the clippers and all accessories in a dry, cool place, away from direct sunlight and moisture. Keep the blade guards on the blades when not in use to protect them.

Odstraňování problémů

Specifikace

Záruka a podpora

VGR products are manufactured to the highest quality standards. This product comes with a 1-letá záruka od data nákupu, která kryje výrobní vady.

For technical support, troubleshooting assistance, or warranty claims, please contact VGR customer service. Our support team is available to assist you.

• Záruční doba: 1 rok
• Zákaznická podpora: Available 24 hours.

VGR offers a 1-year warranty and 24-hour customer support.