Hoover HWD21

Hoover HWD21 Stainless Steel 20L Wet Dry Drum Vacuum Instruction Manual

Model: HWD21

Hoover Proclean Stainless Steel 20L Wet Dry Drum Vacuum banner

Nadview of the Hoover Proclean Stainless Steel 20L Wet Dry Drum Vacuum.

Důležité bezpečnostní informace

Read all instructions carefully before using the appliance. Retain this manual for future reference.

  • Před čištěním nebo údržbou vždy odpojte vysavač od elektrické sítě.
  • Nevysávejte hořlavé nebo vznětlivé materiály, horký popel ani velké, ostré předměty.
  • Do not immerse the motor head in water or other liquids.
  • Před spuštěním se ujistěte, že jsou všechny filtry správně nainstalovány.
  • Tento spotřebič je určen pouze pro domácí použití.

Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

  • 1x Hoover Wet & Dry vacuum cleaner
  • 1x Flexi hose and tube attachment
  • 1x 2-in-1 Crevice tool
  • 1x kartáč na podlahu
  • 1x Návod k použití
Hoover Wet Dry Vacuum Cleaner and all included attachments

All components included with the Hoover HWD21 Wet Dry Drum Vacuum.

Montáž a nastavení

  1. Rozbalení: Opatrně vyjměte všechny součásti z obalu.
  2. Montáž koleček: Invert the tank and firmly push the castor wheels into their designated slots on the base. Ensure they click into place.Close-up of the vacuum's castor wheels

    Ensure castor wheels are securely attached for mobility.

  3. Připojení hadice: Insert the flexible hose into the suction inlet on the front of the vacuum cleaner until it is secure. For the blower function, connect the hose to the exhaust outlet.
  4. Připevnění prodlužovacích trubek a trysek: Connect the desired extension tubes to the hose, then attach the appropriate nozzle (e.g., floor brush, crevice tool) for your cleaning task.

Návod k obsluze

Zapnutí/vypnutí

Plug the power cord into a suitable electrical outlet. Press the green "ON" button to start the vacuum and the red "OFF" button to stop it.

Power buttons on the Hoover Wet Dry Vacuum

Location of the power ON (green) and OFF (red) buttons.

Suché vysávání

For dry vacuuming, ensure the dry filter is correctly installed inside the tank. Attach the floor brush or crevice tool as needed. Move the nozzle over the dry debris to collect it.

Hoover Wet Dry Vacuum cleaning dry debris on a tiled floor

The floor brush attachment effectively cleans dry debris from hard surfaces.

Mokré vysávání

For wet vacuuming, remove the dry filter. Attach the appropriate wet nozzle (if different from dry, or use the floor brush without the brush insert). Carefully vacuum liquid spills. Do not overfill the tank; the float mechanism will stop suction when full.

Hoover Wet Dry Vacuum cleaning a liquid spill

The vacuum efficiently handles liquid spills on various surfaces.

Funkce ventilátoru

To use the blower function, detach the hose from the suction inlet and connect it to the exhaust outlet located on the motor head. Turn on the vacuum to use it as a blower for clearing debris from pathways or hard-to-reach areas.

Hoover Wet Dry Vacuum operating in blower mode

The blower function helps clear debris from surfaces.

Použití příloh

  • Víceúčelová podlahová hubice: Ideal for general cleaning on both hard floors and carpets.
  • Štěrbinový nástroj 2 v 1: Use the narrow end for tight spaces and corners. Slide the brush attachment forward for dusting delicate surfaces or upholstery.Crevice tool attachment cleaning upholstery

    The crevice tool with brush is suitable for cleaning upholstery and tight areas.

Údržba

Vyprázdnění Nádrže

After each use, especially after wet vacuuming, unplug the unit and unclip the motor head. Carefully lift the motor head and dispose of the collected debris or liquid. Clean the inside of the tank with water and mild detergent if necessary, then dry thoroughly.

Čištění filtrů

  • Suchý filtr: For dry vacuuming, regularly check and clean the dry filter. Tap it gently to remove dust or rinse with water if heavily soiled. Ensure it is completely dry before re-installing.
  • Pěnový filtr (pro mokré použití): If a foam filter is used for wet vacuuming, rinse it with water and allow it to air dry completely before storage or next use.

Běžné čištění a skladování

Otřete vnější povrch vysavače reklamouamp cloth. Do not use abrasive cleaners. Store the vacuum and its accessories in a dry place, away from direct sunlight and extreme temperatures. Utilize the onboard accessory storage for convenience.

Odstraňování problémů

ProblémMožná příčinaŘešení
Vakuum se nezapne.Chybí napájení; napájecí kabel není zapojen; tlačítko napájení není stisknuto.Check power outlet; ensure cord is securely plugged in; press the green "ON" button.
Ztráta sání.Hose or nozzle blocked; tank full; filter clogged; hose not securely attached.Check and clear blockages; empty the tank; clean or replace filter; ensure hose is firmly connected.
Únik vody během mokrého vysávání.Tank overfilled; seals not properly seated.Empty the tank; check and re-seat the motor head and any seals.
Neobvyklý hluk během provozu.Blockage in hose or nozzle; motor issue.Zkontrolujte, zda nejsou ucpané, a odstraňte je. Pokud hluk přetrvává, kontaktujte zákaznickou podporu.

Specifikace

FunkceDetail
ZnačkaVysavač
Číslo modeluHWD21
Zdroj napájeníElektrický kabel
Výkon motoru1200W
Kapacita nádrže20 litrů
Materiál nádržeNerez
Délka kabelu5m
Doporučení pro povrchVšechna patra
BarvaČerná a stříbrná
Zahrnuté komponentyVacuum cleaner, Flexi hose, Extension tube, 2-in-1 Crevice tool, Floor brush, Instruction manual

Záruka a podpora

This Hoover HWD21 Stainless Steel 20L Wet Dry Drum Vacuum comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.

For technical support, spare parts, or warranty claims, please contact Hoover customer service through their official webwebu nebo kontaktních informací uvedených v záruční dokumentaci.

Uschovejte si prosím doklad o koupi pro účely záruky.

© 2026 Hoover. Všechna práva vyhrazena.

Logo Hoover

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.