1. Konec produktuview
The AMZCNC 18V Cordless Pro Press Tool Kit (Model CZ-1930) is designed for creating secure and consistent press connections in both copper and ASTM F1807 PEX plumbing systems. This tool is suitable for residential and commercial plumbing applications, offering a reliable alternative to traditional soldering or crimping methods.
Klíčové vlastnosti:
- Professional Press Compatibility: Designed for copper and ASTM F1807 PEX press systems.
- Spolehlivé spojení: Engineered for uniform crimping force to ensure leak-free, dependable connections.
- Rychlý provoz: 18V brushless motor completes presses in approximately 3 seconds.
- Široká kompatibilita: Includes dies for 1/2", 3/4", 1" copper and 3/8"–1" ASTM F1807 PEX.
- Ergonomický design: Features an ergonomic grip and a 180° rotatable head for ease of use in various situations.
The complete AMZCNC 18V Cordless Pro Press Tool Kit, including the main tool, two 18V lithium-ion batteries, a charger, and a selection of press dies, all organized within a durable carrying case.
2. Bezpečnostní informace
Vždy si přečtěte a pochopte všechna bezpečnostní varování, pokyny, ilustrace a specifikace dodané s tímto elektrickým nářadím. Nedodržení všech níže uvedených pokynů může vést k úrazu elektrickým proudem, požáru a/nebo vážnému zranění.
Obecná bezpečnostní upozornění:
- Wear appropriate personal protective equipment (PPE) including safety glasses, gloves, and hearing protection.
- Udržujte pracovní prostor čistý a dobře osvětlený. Nepořádek nebo tmavé prostory vedou k nehodám.
- Nepracujte s elektrickým nářadím ve výbušném prostředí, například v přítomnosti hořlavých kapalin, plynů nebo prachu.
- Při práci s elektrickým nářadím držte děti a přihlížející mimo dosah. Rozptylování může způsobit ztrátu kontroly.
- Ensure the tool is switched off and the battery is removed before making any adjustments, changing accessories, or storing power tools.
Použití a péče o akumulátorové nářadí:
- Nabíjejte pouze nabíječkou specifikovanou výrobcem.
- Používejte elektrické nářadí pouze se speciálně určenými akumulátory.
- When battery pack is not in use, keep it away from other metal objects that can make a connection from one terminal to another.
- Za nevhodných podmínek může z baterie unikat kapalina; vyhnout se kontaktu. Pokud náhodou dojde ke kontaktu, opláchněte vodou. Pokud se kapalina dostane do očí, vyhledejte navíc lékařskou pomoc.
VAROVÁNÍ: Always ensure the pressure release knob is correctly operated as per instructions to prevent injury or damage to the tool. Refer to the tool's warning labels for additional safety information.
3. Komponenty produktu
The AMZCNC 18V Cordless Pro Press Tool Kit includes the following items:
- 1 x Hydraulic Body (Main Press Tool)
- 1 x Jaw (Pre-installed or separate)
- 11 x Crimp Dies (Various sizes for Copper and PEX)
- 2 x 18V lithium-iontové baterie
- 1 x Nabíječka baterií
- 1 x Přepravní pouzdro
Included Dies:
A visual representation of the 11 included US standard press dies. These dies are compatible with ASTM F1807 PEX (3/8", 1/2", 5/8", 3/4", 1"), ASTM F877 PEX (1/2", 3/4", 1"), and Copper Pipe (1/2", 3/4", 1").
Baterie a nabíječka:
This image shows the two 18V 5.0Ah Lithium-Ion batteries and the dedicated charger included with the AMZCNC Pro Press Tool Kit.
4. Nastavení
4.1 Nabíjení baterie
- Připojte nabíječku do standardní elektrické zásuvky.
- Zasuňte 18V lithium-iontovou baterii do nabíječky, dokud nezacvakne.
- Allow the battery to charge fully. The charger's indicator light will show the charging status (refer to charger manual for specific light patterns).
- Po nabití vyjměte baterii z nabíječky.
4.2 Installing Press Dies
- Ujistěte se, že je nářadí vypnuté a baterie vyjmutá.
- Open the tool's jaw by pressing the release mechanism.
- Select the appropriate die size for your pipe and fitting.
- Insert the chosen dies into the jaw, ensuring they are seated correctly and securely.
- Close the jaw until the dies are held firmly in place.
A three-step visual guide demonstrating how to install the press dies. The steps include opening the tool's jaw, carefully inserting the desired die, and ensuring it is securely in place for operation.
4.3 Připevnění baterie
- Align the charged battery with the battery port on the tool's handle.
- Slide the battery into place until it clicks, indicating a secure connection.
5. Návod k obsluze
5.1 Preparing the Pipe and Fitting
- Cut the pipe to the desired length, ensuring a clean, square cut.
- Deburr the inside and outside edges of the pipe.
- Clean the pipe and fitting surfaces to remove any dirt, grease, or debris.
- Insert the pipe fully into the fitting. Ensure the pipe is seated against the stop inside the fitting.
5.2 Performing a Press Connection
- Open the tool's jaw and position it around the fitting, ensuring the dies are centered over the fitting's crimp ring.
- Close the jaw securely around the fitting.
- Důležité: Locate the pressure release knob (often a rotary knob or lever) on the tool. Turn this knob to the "engage" or "pressure build" position. This allows the hydraulic pressure to build during the crimping process.
- Press and hold the trigger to initiate the pressing cycle. The tool will apply pressure, crimping the fitting.
- Continue holding the trigger until the tool completes its cycle and the dies fully close around the fitting. The tool may make a high pinging noise as it reaches full pressure; this is normal.
- Once the crimp is complete, release the trigger.
- Důležité: Turn the pressure release knob to the "release" position to relieve the hydraulic pressure. This will allow the dies to retract and the jaw to open.
- Remove the tool from the crimped fitting.
- Inspect the crimped connection to ensure it is uniform and secure.
Operační videa:
This video demonstrates the AMZCNC 18V Pro Press Tool creating a secure, leak-free connection on a pipe. It shows the process of positioning the tool and completing a press.
This video illustrates the fast operation of the AMZCNC 18V Cordless Plumbing Press Tool, showcasing its use with both copper and PEX dies to form quick and reliable connections.
6. Údržba
Regular maintenance ensures the longevity and optimal performance of your AMZCNC Pro Press Tool.
6.1 Čištění
- After each use, wipe down the tool and dies with a clean, dry cloth to remove any debris or moisture.
- Ensure no foreign objects are lodged in the jaw mechanism or around the dies.
6.2 Mazání
- Periodically apply a small amount of hydraulic oil or a suitable lubricant to the moving parts of the jaw and the hydraulic piston. Consult the manufacturer for specific lubrication points if not clearly indicated.
- This helps maintain smooth operation and prevents wear.
6.3 Skladování
- Store the tool, batteries, and charger in the provided carrying case in a dry, cool place, away from direct sunlight and extreme temperatures.
- Před uskladněním vyjměte z nástroje baterii.
Cyklus údržby: The tool is designed for a maintenance cycle of approximately 10,000 presses. Regular inspection and lubrication are recommended to extend tool life.
7. Řešení problémů
If you encounter issues with your AMZCNC Pro Press Tool, refer to the following common troubleshooting steps:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Tool does not operate or press. | Baterie není nabitá nebo není správně vložena. | Ujistěte se, že je baterie plně nabitá a bezpečně připojená. |
| Incomplete press or weak crimp. | Incorrect die size; pressure release knob not engaged; low battery. | Verify correct die size. Ensure pressure release knob is in the "engage" position. Charge battery. |
| Tool makes a high pinging noise during operation. | Normal operation when reaching full pressure. | This is a normal sound indicating the tool is reaching its maximum crimping force. No action required. |
| Dies do not retract after pressing. | Pressure release knob not turned to "release" position. | Turn the pressure release knob to the "release" position to relieve hydraulic pressure. |
Pokud problémy přetrvávají i po provedení těchto kroků, kontaktujte prosím zákaznickou podporu.
8. Specifikace
| Specifikace | Detail |
|---|---|
| Značka | AMZCNC |
| Číslo modelu | CZ-1930 |
| Hmotnost položky | 9.16 kg |
| Materiál rukojeti | Uhlíková ocel |
| Typ rukojeti | Ergonomický |
| Počet položek | 2 (Tool + Jaw) |
| Zahrnuté komponenty | 11 Crimp dies, 2 Battery, Hydraulic body, Jaw, charger |
| Specifická použití | Residential plumbing, commercial plumbing, water line installations, HVAC systems, gas pipe repairs |
| Size (Dies) | 1/2", 3/4", 1" (Copper), 3/8", 1/2", 5/8", 3/4", 1" (PEX) |
| Typ rukojeti | Rotating, Ergonomic |
| Specifikace splněna | ASTM F877 |
| Krimpovací rozsah | PEX 3/8"-1", Copper Pipe 1/2"-1" |
| Krimpovací síla | 80 kN |
| Mrtvice | 19 mm |
| Cyklus údržby | 10,000KRÁT |
This image displays the technical specifications of the AMZCNC Pro Press Tool, detailing its model number (HT-1930), crimping range for PEX (3/8"-1") and Copper (1/2"-1"), crimping force (80 KN), stroke (19 MM), packaging details, and a maintenance cycle of 10,000 times.
9. Záruka a podpora
9.1 Informace o záruce
The AMZCNC 18V Cordless Pro Press Tool Kit typically comes with a jednoletá záruka od data nákupu. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání. Uschovejte si prosím doklad o koupi pro případ uplatnění záruky.
Note: Warranty terms may vary. Refer to the specific warranty documentation included with your product or contact the manufacturer directly for the most accurate and up-to-date information.
9.2 Zákaznická podpora
For technical assistance, replacement parts, or warranty inquiries, please contact AMZCNC customer support through their official website or the retailer from whom the product was purchased. When contacting support, please have your model number (CZ-1930) and purchase date available.