SMALLRIG S1R II / S1 II Cage Kit 4903 Instruction Manual

1. Úvod

This instruction manual provides detailed guidance for the installation, operation, and maintenance of your SMALLRIG S1R II / S1 II Cage Kit 4903. This kit is designed to enhance the functionality and protection of your Panasonic LUMIX S1 II, S1 IIE, or S1R II camera, offering multiple accessory mounting points and improved handling.

2. Obsah balení

Ověřte prosím, zda jsou ve vašem balení obsaženy všechny níže uvedené položky:

Klec × 1
Kabel Clamp for HDMI & USB-C × 1
Horní rukojeť × 1
Návod k obsluze × 1
Záruční list × 1

Components of the SmallRig S1R II / S1 II Cage Kit 4903, including the camera cage, top handle, and cable clamp. — Figure 2.1: Included components of the Cage Kit 4903.

A magnetic wrench is included for convenient disassembly and assembly of the components.

3. Nastavení a instalace

Follow these steps to properly install the cage kit onto your camera:

Připravte si fotoaparát: Ensure your camera is powered off. If your camera has side lock adapters, remove them before installing the cage.
Připevněte klec: Position the camera within the cage. Secure the camera using the one bottom 1/4"-20 screw and the two side lock adapters. The cage features rubber pads to prevent scratching the camera body.

Diagram illustrating the three-point locking system of the SmallRig camera cage, showing the bottom 1/4-20 screw and two side lock adapters. — Figure 3.1: Three-Point Locking System for camera stability.

Nainstalujte horní rukojeť: Attach the top handle to the designated mounting points on the cage. This handle is ergonomically designed for comfortable grip during low-angle shooting and provides additional expansion options.

A Panasonic LUMIX camera with the SmallRig cage and top handle installed, held by a person. — Figure 3.2: Camera with cage and top handle installed.

Připojte kabel Clamp: Zajistěte kabel třamp for HDMI & USB-C cables to the side of the cage using the thumbscrew. This clamp fixes both HDMI and USB-C cables simultaneously, ensuring stable data transmission and preventing accidental disconnections. Poznámka: Kabel třamp is only compatible with LUMIX S1 II / S1 IIE / S1R II cameras.

Detailní záběr view of the SmallRig cable clamp for HDMI and USB-C, attached to the camera cage. — Figure 3.3: Cable Clamp for HDMI & USB-C.

4. Návod k obsluze

The SmallRig Cage Kit 4903 offers various features to enhance your camera setup:

Více montážních bodů: The cage provides numerous accessory mounting points, including 1/4"-20 threaded holes, 3/8"-16 locating holes for ARRI accessories, cold shoe mounts, and a HawkLock H21 NATO rail. These allow for attachment of side handles (e.g., ID:3323, ID:4485), SSD holders (e.g., ID: BSH2343), microphones, LED video lights, monitors (e.g., Monitor Mount ID: 2903B), and other accessories.

Diagram showing various mounting points on the SmallRig camera cage, including 1/4-20 and 3/8-16 threaded holes, cold shoe mounts, and NATO rail. — Figure 4.1: Multiple Mounting Points on the cage.

Quick Switching between Horizontal and Vertical Shooting: The top handle supports quick disassembly and reattachment, facilitating seamless transitions between horizontal and vertical shooting orientations.
Arca-Swiss Quick Release Plate: The bottom of the cage features a built-in Arca-Swiss quick release plate, enabling rapid transitions between DJI RS series stabilizers (RS 2/ RSC 2 / RS 3 / RS 3 Pro / RS 4 / RS 4 Pro gimbals) and Arca-compatible tripods. It also includes a threaded hole for the Arca-Swiss Quick Release Plate (ID: 3154).

Three images demonstrating the SmallRig cage kit in different shooting scenarios: handheld, on a gimbal, and on a tripod. — Figure 4.2: The cage kit supports multiple shooting scenarios.

5. Údržba

To ensure the longevity and optimal performance of your SmallRig Cage Kit, follow these maintenance guidelines:

Čištění: Wipe the cage and accessories with a soft, dry cloth to remove dust and fingerprints. For stubborn dirt, use a slightly damp hadříkem a ihned osušte. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
Inspekce: Periodically check all screws and connections to ensure they are tight. Use the magnetic wrench provided for tightening if necessary.
Skladování: Store the cage kit in a dry, clean environment away from extreme temperatures and direct sunlight when not in use.

6. Řešení problémů

If you encounter any issues with your SmallRig Cage Kit, consider the following:

Uvolněná připojení: If accessories feel unstable, ensure all screws, especially the main camera attachment screws and side lock adapters, are securely tightened.
Kompatibilita příslušenství: Verify that any third-party accessories are compatible with the mounting points (1/4"-20, 3/8"-16, cold shoe, NATO rail).
Kabel Clamp Kompatibilita: Kabel třamp for HDMI & USB-C is specifically designed for LUMIX S1 II / S1 IIE / S1R II cameras. It may not fit other camera models, even if the cage itself is compatible.
XLR Unit Compatibility: The cage is compatible with Panasonic DMW-XLR1 / XLR2, but the top handle included in this kit is not. If you intend to use DMW-XLR1 / XLR2, it is recommended to use a compatible top handle such as SmallRig Top Handle for Sony XLR-K1M / K2M / K3M and for Panasonic DMW-XLR1 / XLR2 3082. When using the 3082, remove the cable clamp on the bottom of the XLR unit.

7. Specifikace

Funkce	Detail
Rozměry produktu	3.15 x 3.15 x 2.76 palce (80 x 80 x 70 mm)
Hmotnost položky	1.34 unce (38 gramů)
Číslo modelu	4903
Výrobce	malá souprava
Kompatibilní zařízení	Panasonic LUMIX S1 II, S1 IIE, S1R II, S5 II, S5 IIX, G9 II (Cage only)
Materiál	Hliníková slitina, nerezová ocel, silikon

8. Záruka a podpora

For detailed warranty information, product registration, or technical support, please visit the official SmallRig webnebo se obraťte na jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi pro případné reklamace.

SMALLRIG 4903