RAPIQUE R306/R110/R118/R03

USB Receiver Instruction Manual

For RAPIQUE Mouse Models R306, R306C, R110, R118, R03 (USB-A)

Zavedení

This manual provides essential information for the proper setup, operation, and maintenance of your RAPIQUE USB-A Receiver. This receiver is specifically designed to ensure a reliable wireless connection for compatible RAPIQUE mouse models.

Co je v krabici

  • 1 x přijímač USB

Nastavení a párování

Follow these steps to connect your RAPIQUE USB-A receiver with your compatible RAPIQUE mouse:

  1. Unplug Previous Receiver: If you have a previous USB receiver connected to your computer, unplug it before proceeding.
  2. Set Mouse to 2.4GHz Mode: Ensure your RAPIQUE mouse is switched to 2.4GHz wireless mode.
  3. Initiate Pairing on Mouse: Press and hold the mode switch button on your mouse until its mode indicator light flashes quickly. For R03 mouse models, press and hold the top DPI button instead. This indicates the mouse is in pairing mode.
  4. Insert New Receiver: Insert the new USB-A receiver into an available USB-A port on your computer or device.
  5. Potvrdit připojení: The mouse mode indicator light will turn solid for 1-2 seconds, confirming that the pairing is successful and the connection has been established.

Důležitá poznámka: During the pairing process, the distance between the mouse and the receiver should not exceed 20cm (approximately 8 inches) to ensure successful connection.

Detailní záběr view of the RAPIQUE USB-A receiver, showing its compact design and standard USB-A connector.

Image: A close-up of the RAPIQUE USB-A receiver, highlighting its small form factor and standard USB-A plug. This receiver is designed for seamless integration with your computer's USB port.

Diagram illustrating the steps to connect the RAPIQUE mouse, including unplugging the old receiver, setting the mouse to 2.4GHz mode, pressing the pairing button, and inserting the new USB receiver.

Image: A visual guide detailing the step-by-step process for connecting the RAPIQUE mouse with its USB receiver. It emphasizes the sequence of actions required for successful pairing.

Obsluha přijímače

Once paired, the RAPIQUE USB-A receiver provides a stable and reliable wireless connection for your mouse. It operates on a plug-and-play basis, requiring no additional software installation.

  • Plug and Play: The receiver allows instant wireless functionality without the need for complex driver installations.
  • Kompaktní design: Its small form factor means it can remain plugged into your USB port without obstructing other ports or risking damage.
  • Spolehlivé připojení: Enjoy stable wireless connectivity for smooth mouse operation with minimal latency.

Údržba

To ensure the longevity and optimal performance of your USB receiver, follow these simple maintenance guidelines:

  • Udržujte v suchu: Avoid exposing the receiver to moisture or liquids.
  • Jemně čistěte: If necessary, gently wipe the exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
  • Skladujte bezpečně: When not in use, store the receiver in a clean, dry place, ideally protected from dust and physical impact.

Odstraňování problémů

If you encounter issues with your RAPIQUE USB-A receiver, please refer to the following common solutions:

  • Receiver Not Detected:
    • Ujistěte se, že je přijímač zcela zasunut do funkčního portu USB-A.
    • Try plugging the receiver into a different USB-A port on your computer.
    • Restartujte počítač.
  • Mouse Not Connecting/Pairing Failure:
    • Re-attempt the pairing steps carefully as outlined in the 'Setup and Pairing' section.
    • Ensure your mouse is in 2.4GHz mode and fully charged or has fresh batteries.
    • Make sure the mouse and receiver are within 20cm of each other during the pairing process.
    • Remove any potential sources of wireless interference (e.g., other 2.4GHz devices) nearby.
  • Přerušované připojení/zpoždění:
    • Ensure there are no large metal objects or other electronic devices between the mouse and the receiver that could cause interference.
    • Try moving the receiver to a USB port closer to the mouse, or use a USB extension cable if necessary.

Specifikace

FunkceDetail
Rozměry produktu0.59 x 0.19 x 0.78 palce (1.5 x 0.48 x 1.98 cm)
Hmotnost položky0.071 unce (2 gramů)
Číslo modeluR306/R110/R118/R03
ZnačkaRAPIQUE
VýrobceRapique
BarvaČerný
Kompatibilní zařízeníRapique R03, Rapique R110, Rapique R118, Rapique R306, Rapique R306C

Záruka a podpora

For information regarding product warranty, please refer to the documentation provided with your original purchase or visit the official RAPIQUE webZáruční podmínky se mohou lišit.

For technical support or further assistance, please contact RAPIQUE customer service or visit the RAPIQUE Store on Amazon.

© 2025 RAPIQUE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.