ATTACK SHARK X85 Pro

ATTACK SHARK X85 Pro Wireless Mechanical Gaming Keyboard User Manual

Zavedení

This manual provides detailed instructions for the ATTACK SHARK X85 Pro Wireless Mechanical Gaming Keyboard. It covers setup, operation, maintenance, and troubleshooting to ensure you get the most out of your device. The X85 Pro features tri-mode connectivity, a smart TFT screen, a multi-function knob, hot-swappable switches, and a gasket-mounted design for an enhanced typing experience.

ATTACK SHARK X85 Pro 75% Layout TFT Screen Mechanical Keyboard

Image: The ATTACK SHARK X85 Pro keyboard, highlighting its 75% layout, TFT screen, and mechanical switches.

Nastavení

Obsah balení

  • ATTACK SHARK X85 Pro Mechanical Keyboard
  • USB-C kabel
  • 2.4GHz USB přijímač
  • Stahovač klíčů
  • Stahovák spínačů

Připojení klávesnice

The X85 Pro supports three connection modes: 2.4GHz wireless, Bluetooth 5.1, and USB-C wired.

Three-Mode Connection options for the ATTACK SHARK X85 Pro keyboard

Image: Diagram illustrating the three connection modes: Bluetooth, 2.4GHz wireless, and USB-C wired.

Bezdrátový režim 2.4 GHz

  1. Locate the 2.4GHz USB receiver, typically stored in a magnetic slot on the keyboard.
  2. Zapojte USB přijímač do volného USB portu na vašem počítači.
  3. On the keyboard's side switch, select the '2.4G' mode.
  4. Klávesnice se automaticky připojí.

Režim Bluetooth

  1. On the keyboard's side switch, select the 'BT' mode.
  2. The TFT screen will display Bluetooth connection options (BT1, BT2, BT3).
  3. Stiskněte Fn + 1, Fn + 2nebo Fn + 3 to select a Bluetooth channel. The indicator will flash rapidly.
  4. On your device (PC, Mac, Laptop), enable Bluetooth and search for 'ATTACK SHARK X85 Pro'.
  5. Select the keyboard to pair. The indicator will stop flashing once connected.

USB-C Wired Mode

  1. Připojte dodaný kabel USB-C k portu USB-C na klávesnici.
  2. Připojte druhý konec kabelu k USB portu počítače.
  3. On the keyboard's side switch, select the 'USB' mode.
  4. Klávesnice bude fungovat jako kabelové zařízení a zároveň se bude nabíjet.

Adjusting Keyboard Height

The keyboard features two-level adjustable feet on the underside. Flip them out to achieve your preferred typing angle and reduce wrist strain during extended use.

Adjustable two-level feet on the keyboard for ergonomic typing

Obrázek: Detail view of the keyboard's adjustable two-level feet and PBT keycaps.

Návod k obsluze

TFT Smart Screen and Knob Functions

The 0.85-inch TFT screen displays essential information and allows for customization. The aluminum knob provides intuitive control.

TFT Smart Screen displaying various configuration options

Image: The 0.85-inch TFT smart screen showing options for RGB effects, color, brightness, speed, connection, layout, volume, and language, along with a custom GIF image display.

  • Výchozí zobrazení: Shows battery level, time, and connection status.
  • Adjusting TFT Display: Turn the knob to navigate through menu sections (Effect, Color, Brightness, Speed, Connect, Layout, Volume, Language). Press the knob to confirm a selection.
  • Ovládání hlasitosti: Dlouhé stisknutí Fn + knoflík to enter volume adjustment mode. Turn the knob to adjust volume. Long press Fn + knoflík znovu k výstupu.
  • Custom GIF Images: The screen supports custom GIF images. Refer to the QMK Web Driver section for details on uploading custom content.
Multi-function knob controls for volume, brightness, RGB effects, and language switching

Image: Visual guide to the multi-function knob's capabilities, including volume, brightness, RGB effects, and language switching.

Ovládání podsvícení RGB

The keyboard features vivid 16.8M-color RGB backlighting with multiple effects.

Keyboard backlight settings with key combinations

Image: Key combinations for controlling RGB backlight settings: Fn + Enter to switch color, Fn + </-> to adjust speed, Fn + \| to switch light mode, and Fn + Up/Down arrow to adjust brightness.

  • Fn + Enter: Switch backlight color.
  • Fn + \|: Switch light mode (19+ effects available).
  • Fn + < (Left Arrow): Snižte rychlost podsvícení.
  • Fn + > (Right Arrow): Zvyšte rychlost podsvícení.
  • Fn + šipka nahoru: Zvyšte jas podsvícení.
  • Fn + šipka dolů: Snižte jas podsvícení.

Music-reactive lighting is exclusive to 2.4G and wired modes.

Přepínače vyměnitelné za provozu

The X85 Pro features hot-swappable sockets, allowing you to change mechanical switches without soldering. It supports 3-pin and 5-pin switches.

Hot-swappable PCBA with linear blueberry switches and custom stabilizer

Obrázek: Podrobný view of the hot-swappable PCBA, showing compatibility with 3/5 pin switches, custom stabilizers, and linear blueberry switches with their specifications.

  1. Use the provided switch puller to carefully remove the keycap, then the switch.
  2. Zarovnejte piny nového spínače s paticemi na desce plošných spojů.
  3. Gently press the new switch into place until it clicks. Ensure pins are not bent.
  4. Vyměňte krytku kláves.

QMK Web Driver for Customization

The keyboard is compatible with QMK firmware, allowing for advanced customization through a web-based driver. This enables macro recording, key redefinition, RGB effect customization, and uploading custom GIF images to the TFT screen.

QMK Web Driver interface for keyboard customization

Image: Screenshot of the QMK Web Driver interface, demonstrating options for macro editing, RGB effects, key redefinition, and DIY GIF image customization.

Access the QMK Web Driver via your web browser (specific URL usually provided by manufacturer or found through a quick search for 'ATTACK SHARK X85 Pro QMK'). Follow the on-screen instructions to program your keyboard.

Údržba

Čištění klávesnice

  • Před čištěním odpojte klávesnici od počítače.
  • Pomocí měkkého kartáče nebo stlačeného vzduchu odstraňte prach a nečistoty z prostoru mezi klávesami.
  • For keycap cleaning, gently remove keycaps using the provided puller. Wipe them with a damp cloth and mild soap solution, then dry thoroughly before reattaching.
  • Povrch klávesnice otřete měkkým hadříkem, který nepouští vlákna. Nepoužívejte agresivní chemikálie ani abrazivní materiály.

Péče o baterie

Klávesnice je vybavena dobíjecí baterií s kapacitou 4000 mAh.

  • Nabíjejte klávesnici pomocí dodaného kabelu USB-C.
  • Abyste prodloužili životnost baterie, vyhněte se častému úplnému vybíjení.
  • If storing the keyboard for an extended period, charge it to approximately 50% before storage.

Odstraňování problémů

ProblémMožná příčinaŘešení
Klávesnice nereaguje v bezdrátovém režimu.Low battery, incorrect mode selected, receiver not connected, pairing issue.Charge the keyboard. Ensure the side switch is set to '2.4G' or 'BT'. Re-insert the 2.4GHz receiver. Re-pair Bluetooth. Try wired mode to confirm functionality.
RGB backlight not working or incorrect.Backlight turned off, brightness too low, specific mode limitations.Upravte jas pomocí Fn + šipka nahoru. Cycle through modes with Fn + \|. Note that music-reactive lighting is only available in 2.4G/wired modes.
Klávesy se neregistrují nebo se píší dvakrát.Uvolněný spínač, nečistoty pod klávesou, problém se softwarem.Remove keycap and switch, check for debris, and re-seat the switch firmly. Ensure QMK software is correctly configured if custom settings are applied.
TFT screen not displaying correctly.Softwarová chyba, nesprávné nastavení.Restart the keyboard. Use the knob to navigate to display settings and ensure correct configuration. Check for firmware updates via the QMK Web Řidič.
Poor wireless range or interference.Obstructions, other wireless devices, distance.Move the keyboard closer to the receiver/device. Remove obstructions. Avoid placing the receiver near other wireless transmitters (e.g., Wi-Fi routers).

Specifikace

  • Značka: ÚTOČNÉHO ŽRALOKA
  • Model: X85 Pro
  • Konektivita: Bluetooth 5.1, bezdrátové připojení 2.4 GHz, kabelové připojení USB-C
  • Rozložení: 75 %
  • Přepínače: Hot-Swappable (supports 3/5-pin mechanical switches)
  • Klávesnice: PBT, Gradient Side-Print
  • Podsvícení: RGB (16.8M colors, 19+ effects)
  • Baterie: 4000 XNUMX mAh
  • Speciální vlastnosti: 0.85" TFT Smart Screen, Multi-function Knob, Gasket Mount Structure, N-Key Rollover, QMK/VIA compatibility
  • Kompatibilní zařízení: Laptop, PC, Windows, Mac
  • Hmotnost položky: Přibližně 2.33 libry
  • Rozměry balení: 14.61 x 7.6 x 2.05 palce

Záruka a podpora

Informace o záruce a technickou podporu získáte na oficiálních stránkách ATTACK SHARK. webnebo se obraťte na prodejce, u kterého jste výrobek zakoupili. Uschovejte si doklad o koupi pro případ reklamace.

You can also visit the official ATTACK SHARK Store on Amazon for additional product information and support resources: ATTACK SHARK Store

Optional protection plans may be available for purchase separately, offering extended coverage beyond the standard manufacturer's warranty. Please check with your retailer for details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.