Konec produktuview
This manual provides instructions for the replacement remote control for specific Richmat adjustable bed base control boxes. This remote is designed to replace lost or damaged original remotes and is compatible with the model for Richmat HJC25 ML150 127780C250033.

Obrázek 1: Přední strana view of the replacement remote control. It features dedicated buttons for adjusting head and foot positions, as well as a 'FLAT' button to return the bed to a flat position.
Důležitá poznámka ke kompatibilitě
This remote control is specifically designed to work with the Richmat HJC25 ML150 127780C250033 control box. It is crucial to verify your existing control box model number to ensure compatibility. This remote is není kompatibilní with OKIN Control boxes or other models not explicitly listed.
Before attempting to pair, ensure your old remote is identical in button layout and functionality to the replacement remote. If you are unsure about compatibility, it is recommended to provide detailed information about your bed, control box, and old remote control to the supplier for verification.

Figure 2: Visual guide for identifying your control box and old remote for compatibility verification. This image highlights the importance of matching the control box model and the appearance of your previous remote.
Pokyny k nastavení a párování
The replacement remote requires 2 AAA batteries (not included). Please install them before proceeding with the pairing process.

Obrázek 3: Zadní view of the remote control, illustrating the battery compartment. Ensure 2 AAA batteries are correctly inserted according to polarity markings.
Způsob párování:
- Krok 1: Na dálkovém ovladači současně stiskněte a podržte tlačítka „head up“ a „foot up“ po dobu 10 sekund.
- Krok 2: Locate the control box underneath your adjustable bed. Push the button on the side of the control box that indicates "Learn" or "Reset Coding". Do not press and hold this button; simply press and release it quickly.
- Krok 3: Once you hear beeps, this indicates that the remote has successfully synced with the control box.
It is recommended to refer to the original user manual for your adjustable bed base for any specific pairing instructions or additional details unique to your bed model.
Návod k obsluze
Once successfully paired, the remote control allows you to adjust the positions of your adjustable bed base. The remote features the following primary functions:
- Hlava nahoru/dolů: Buttons with a person icon showing the upper body raised or lowered. Press to raise or lower the head section of the bed.
- Noha nahoru/dolů: Buttons with a person icon showing the lower body raised or lowered. Press to raise or lower the foot section of the bed.
- BYT: A central button labeled "FLAT". Press this button to return both the head and foot sections of the bed to a completely flat position.
For advanced features or specific preset positions, please consult the original manual provided with your adjustable bed base, as this remote is a replacement for basic functionality.
Údržba
Pro zajištění optimálního výkonu a dlouhé životnosti vašeho dálkového ovladače:
- Výměna baterie: The remote requires 2 AAA batteries. Replace batteries when the remote's response becomes sluggish or stops working. Always use new, good quality batteries.
- Čištění: Dálkový ovladač otírejte měkkým, suchým hadříkem. Nepoužívejte tekuté čisticí prostředky ani abrazivní materiály.
- Skladování: Dálkový ovladač skladujte na suchém místě, mimo dosah extrémních teplot a přímého slunečního záření.
Odstraňování problémů
If you encounter issues with your replacement remote control, please refer to the following common solutions:
- Dálkové ovládání nereaguje:
- Zkontrolujte, zda jsou baterie správně vloženy a zda jsou dostatečně nabité. V případě potřeby je vyměňte.
- Ensure there are no obstructions between the remote and the bed's control box.
- Re-attempt the pairing process as described in the "Setup and Pairing Instructions" section.
- Nesprávná funkčnost:
- Verify that the remote model is indeed compatible with your specific Richmat control box model (for Richmat HJC25 ML150 127780C250033).
- Confirm that your old remote had an identical button layout and functions.
- Remote Does Not Pair:
- Ensure you are pressing and holding the correct buttons on the remote for 10 seconds (head up + foot up).
- Make sure you are pressing and releasing the "Learn" or "Reset Coding" button on the control box, not holding it down.
- Check the original bed base manual for any alternative pairing methods or specific requirements.
If the issue persists after following these steps, please contact customer support with detailed information about your bed, control box, and the remote.
Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | for Richmat HJC25 ML150 127780C250033 |
| Kompatibilní ovládací jednotka | Richmat HJC25 ML150 127780C250033 (also compatible with NL200U 127780C180169 as per product features) |
| Zdroj napájení | 2 x AAA baterie (nejsou součástí balení) |
| Barva | Černý |
| Maximální počet podporovaných zařízení | 1 |
| Kompatibilní zařízení | Nastavitelná základna postele |
| Výrobce | SZHKHXD |
Záruka a podpora
This product is a replacement part. For specific warranty information, please refer to the original purchase terms or contact the seller directly. No explicit warranty information is provided with this replacement remote.
Zákaznická podpora:
If you require further assistance, have questions regarding compatibility, or encounter issues not covered in the troubleshooting section, please contact the supplier. When contacting support, be prepared to provide:
- Detailed information about your adjustable bed base (brand, model).
- The model number of your existing control box.
- Pictures of your old remote control (front and back) and the control box label.
- Popis problému, který máte.
Providing this information will help expedite the support process and ensure accurate assistance.





