How do I program the auto-lock feature on the PHYSEN MMS-1-US-B or MMS-2-US-B smart lock without using the app?

Based on the documentation for the PHYSEN Smart Deadbolt (Model MMS-2-US-B), the auto-lock feature is primarily managed through the Tuya App. The manual specifies that the lock can be configured to automatically lock after a duration of 5 to 100 seconds, but it notes that "this feature can be set via the Tuya App."If you are using the version without app support or prefer not to use the app, please consider the following:App Requirement: The provided manual does not list a specific keypad-only sequence for changing the auto-lock timer. Most smart locks in this category require the app for advanced timing configurations.One-Touch Locking: If you cannot set the timer, you can typically lock the door manually from the outside by pressing and holding any key on the keypad (often the '#' or a dedicated lock icon) for 2 seconds.General Keypad Programming: If your specific model (MMS-1-US-B) supports local programming, it usually involves entering a Master Code followed by a specific function code. However, since that specific sequence is not in the available documentation, it is highly recommended to use the Tuya App once to set your preferred time, after which the lock will remember the setting even if you stop using the app.If you do not have the app-enabled version, please check the back of your battery cover or the physical printed manual that came in your box for a "Function Programming Table," as keypad-only models vary significantly by firmware version.

Uživatelská příručka k bezklíčovému vstupu s otiskem prstu PHYSEN Smart Deadbolt Lock (model MMS-2-US-B)

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your PHYSEN Keyless Entry Fingerprint Smart Deadbolt Door Lock. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Důležité bezpečnostní informace:

Nepokoušejte se zámek rozebírat ani opravovat sami. Požádejte o pomoc zákaznickou podporu.
Před instalací se ujistěte, že jsou všechny součásti přítomny a nepoškozené.
Mechanické klíče uchovávejte na bezpečném místě mimo objekt.
Install batteries only after the lock is fully installed on the door.

2. Konec produktuview

The PHYSEN Smart Deadbolt offers multiple entry methods and enhanced security features for your home or office. It is designed for convenient and reliable access control.

Klíčové vlastnosti:

Více způsobů odblokování: Fingerprint, Passcode, Smartphone App (Bluetooth), and Mechanical Key.
Biometric Fingerprint Recognition: Fast and accurate fingerprint identification (0.3 seconds, 99.9% recognition rate, 500 DPI resolution). Stores up to 100 fingerprints.
Ovládání aplikace: Manage users, generate temporary codes, and monitor lock status via the Tuya App (Bluetooth connection within 2 meters).
Funkce automatického zámku: Automaticky zamkne dveře po uplynutí nastavené doby (5–100 sekund).
Anti-Peeping heslo: Enter random digits before or after your actual passcode to prevent unauthorized viewIng.
Funkce dveřního zvonku: Integrated doorbell button on the keypad.
Indikátor slabé baterie: Alerts when battery power is low, also viewmožné prostřednictvím aplikace.
Nouzové napájení: Type-C port for temporary power supply if batteries are depleted.
Vodotěsnost IP54: Poskytuje ochranu před prachem a stříkající vodou.

Obsah balení:

Smart Door Lock Assembly
Montážní materiál (šrouby, vruty)
Uživatelská příručka
2 mechanické klávesy

3. Instalační příručka

This smart deadbolt is recommended for wooden doors and fits most US standard doors. It is not compatible with metal doors, rim cylinders, mortise locks, or integrated handle sets.

3.1 Kontroly před instalací

Before beginning installation, verify your door dimensions:

Tloušťka dveří: 1-3/8" to 2" (35mm or 50mm)
Průměr dveřního otvoru: 2-1/8" (54 mm)
Zadní část: 2-3/8" or 2-3/4" (60mm or 70mm) - adjustable
Průměr otvoru západky: 1" (25 mm)

Diagram showing door dimensions and compatibility requirements for the smart deadbolt.

Image: Door Measurement Guide. This diagram illustrates the necessary door dimensions and hole requirements for proper installation, including door thickness, backset, and latch hole size. It also shows compatible and incompatible door lock types.

3.2 Postup instalace

Install the smart deadbolt using a screwdriver. Follow the instructions provided in the included setup assembly kits. Ensure the deadbolt is installed correctly before inserting batteries.

Poznámka: Nainstalujte baterie po the keyless door lock has been installed. If the deadbolt lock cannot be locked or unlocked after installation, try resetting the door lock and connecting the app to change the left and right door opening direction.

3.3 Připojení aplikace a počáteční nastavení

After physical installation, connect the lock to the Tuya App for full functionality and configuration.

Multi-panel image showing steps to connect the smart lock to the app.

Image: App Connection Steps. This image displays a step-by-step guide for connecting the smart lock to the mobile application, including battery installation, device search, and successful connection confirmation.

Krok 1: Install the batteries after the door lock has been installed, and keep it unlocking.
Krok 2: Add Device, but cannot search the door locks more than 10s.
Krok 3: Return to Home, Click Device Management.
Krok 4: Delete the existing Bluetooth lock.
Krok 5: Again add Device, Auto searching the lock and connecting it. (Or add manually "Lock BLE")
Krok 6: Connection successful. Test locking and unlocking.
Krok 7: If the door lock is not working, please check "More Settings" and change the door opening direction.

4. Návod k obsluze

The PHYSEN Smart Deadbolt offers multiple convenient ways to secure and access your property.

Collage showing four ways to unlock the smart deadbolt: App Control, Fingerprint, Password, and Physical Key.

Image: Multiple Ways to Unlock. This image illustrates the various methods available for unlocking the smart deadbolt, including smartphone app control, fingerprint recognition, keypad password entry, and traditional physical keys.

4.1 Odemknutí pomocí otisku prstu

Place your registered finger on the fingerprint sensor. The lock will unlock within 0.3 seconds if the fingerprint is recognized.

Close-up of the smart lock's fingerprint sensor with a finger on it, highlighting 0.3s biometric identification and 99.99% recognition rate.

Image: Fingerprint Unlocking. This image focuses on the fingerprint sensor, detailing its 0.3-second biometric identification speed, 500 DPI resolution, and 99.99% recognition rate for quick and secure access.

4.2 Unlocking with Passcode

Enter your registered passcode on the keypad. You can also use the anti-peeping function by entering random digits before or after your actual code.

Image showing a person receiving a one-time password on their phone and another person entering a code on the smart lock keypad.

Image: One-time Password and Keypad Entry. This image illustrates the use of one-time passwords generated via the app and how to enter them on the lock's keypad for temporary access.

4.3 Unlocking with Smartphone App (Bluetooth)

Within 2 meters of the lock, open the Tuya App on your smartphone. You can unlock the door directly from the app interface.

Image showing the smart lock installed on a door next to a smartphone displaying the 'Smart Lock' app interface.

Image: App Control. This image displays the smart lock on a door with a smartphone showing the associated app, demonstrating how to control and access the lock via Bluetooth.

4.4 Unlocking with Mechanical Key

In case of emergency or battery depletion, use the provided mechanical keys to unlock the deadbolt manually.

4.5 Funkce automatického zámku

The lock can be configured to automatically lock after a specified duration (5-100 seconds) once unlocked. This feature can be set via the Tuya App.

Image of a woman entering a home with gift boxes, illustrating the auto-lock feature of the smart deadbolt.

Image: Auto-Lock Feature. This image depicts a user entering a home, highlighting the convenience of the auto-lock function which can be set to engage automatically after 5-100 seconds.

4.6 Funkce zvonku

Press the doorbell icon on the keypad to activate the integrated doorbell chime.

Close-up of the smart lock keypad with a finger pressing the doorbell icon.

Image: Doorbell Button. This image shows a finger pressing the doorbell icon on the smart lock's keypad, indicating its integrated doorbell functionality.

5. Údržba

5.1 Výměna baterie

The lock is powered by 4 AAA alkaline batteries (not included). When the low battery indicator activates (visible on the lock and via the app), replace all four batteries promptly. The lock also features a Type-C emergency power port for temporary power if batteries are fully depleted.

Image showing the smart lock with a low battery indicator and an estimated 12-month battery life.

Image: Low Battery Indicator. This image highlights the low battery indicator feature on the smart lock, reminding users to replace batteries when necessary. It also mentions an approximate 12-month battery life.

5.2 Čištění

Clean the lock's exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.

6. Řešení problémů

Zámek nereaguje: Check battery level. Replace batteries if low. Use the Type-C emergency power port if needed.
Lock not locking/unlocking after installation: Ensure batteries are installed correctly. Reset the lock and use the Tuya App to verify and adjust the door opening direction (left or right). Refer to Step 7 in Section 3.3.
Otisk prstu nebyl rozpoznán: Ujistěte se, že máte prst čistý a suchý. Pokud problémy přetrvávají, otisk prstu znovu zaregistrujte.
Problémy s připojením k aplikaci: Ensure Bluetooth is enabled on your phone and you are within 2 meters of the lock. Try restarting the app or your phone.
Klávesnice nereaguje: Check for low battery. Ensure no debris is obstructing the buttons.

Image showing how to adjust the door opening direction (left or right) in the smart lock app settings.

Image: Door Opening Direction Adjustment. This image demonstrates how to manually adjust the door opening direction (left or right) within the Tuya App settings, a common troubleshooting step for lock functionality.

7. Specifikace

Značka	FYZÉN
Název modelu	Smart Door Lock (MMS-2-US-B)
Typ zámku	Biometrická závora
Materiál	Hliník
Barva	Black (Matte Black Finish)
Rozměry položky (D x Š x V)	5.3 x 3.5 x 7.3 palce
Hmotnost položky	1.87 libry
Zdroj napájení	4 x AAA baterie (nejsou součástí balení)
Protokol připojení	Bluetooth (ovládání aplikací)
Speciální funkce	Anti-Peeping Password, Auto-Lock, Back-Lit Keypad, Fingerprint, One-Touch Lock, Doorbell Function, Low Battery Indicator, Type-C Emergency Power
Voděodolnost	IP54

Image illustrating the IP54 water resistance rating of the smart lock, showing temperature ranges.

Image: IP54 Water Resistance. This image highlights the lock's IP54 water-resistance rating, indicating its suitability for outdoor use within specified temperature ranges (129°F/55°C to -14°F/-10°C).

8. Záruka a podpora

For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official PHYSEN webmísto. Uschovejte si doklad o koupi pro případ záručních reklamací.

PHYSEN MMS-2-US-B

PHYSEN Keyless Entry Fingerprint Smart Deadbolt Door Lock

1. Úvod