BEAMNOVA 3 in 1 Portable Electric Hoist & Manual Trolley User Manual

Zavedení

Thank you for choosing the BEAMNOVA 3 in 1 Portable Electric Hoist and 0.5-Ton Manual Trolley. This comprehensive system is designed for efficient and safe lifting and material handling, offering versatility with its electric hoist and manual trolley components. This manual provides essential information for the safe and effective operation, installation, and maintenance of your equipment. Please read it thoroughly before use.

Bezpečnostní opatření

Always prioritize safety when operating heavy machinery. Failure to follow these instructions may result in serious injury or property damage.

• Přečtěte si manuál: Understand all instructions and warnings before operating the hoist and trolley.
• Správná instalace: Ensure the hoist and trolley are correctly installed on a suitable I-beam or support structure capable of handling the maximum load.
• Kapacita zatížení: Never exceed the rated load capacity of 1102 lbs (500 kg) for the hoist and 0.5-Ton for the trolley.
• Před použitím zkontrolujte: Before each use, inspect the hoist, wire rope, hooks, and trolley for any signs of wear, damage, or deformation. Do not use if damaged.
• Stable Load: Ensure the load is balanced and securely attached to the hook before lifting. Avoid swinging loads.
• Vyčistit oblast: Keep the work area clear of personnel and obstructions during operation.
• Napájení: Connect the hoist to a grounded power outlet with the correct voltage (110 V).
• Vyvarujte se přehřátí: Do not operate the hoist continuously for extended periods without allowing for cooling.
• Údržba: Perform regular maintenance as outlined in this manual to ensure optimal performance and safety.

Konec produktuview

Komponenty

• Electric Hoist Unit with Wire Rope and Hook
• Bezdrátové dálkové ovládání
• Drátová řídicí jednotka
• Manual Trolley for I-Beam
• Napájecí kabel
• Accessories (e.g., gloves, batteries for remote, gaskets)

Klíčové vlastnosti

Kompletní systém: This image displays all components included in the BEAMNOVA 3 in 1 Portable Electric Hoist and 0.5-Ton Manual Trolley package, including the hoist, manual trolley, wireless remote, wired control, power cable, and accessories like gloves and batteries.

3-in-1 Control: The hoist offers versatile control options including a wireless remote control (up to 100m/328ft range, 12V/23A battery included), a durable wired control, and a manual control lever for adaptable operation in various scenarios.

Powerful Copper Core Motor: Equipped with a 1500W motor, providing a lifting speed of 5m/min (16.4ft/min). Features include good thermal conductivity, excellent electrical conductivity, low voltage loss, and quick heat dissipation for reliable performance.

High Loading Capacity & Durable Components: The hoist supports a 500kg (1102lbs) loading capacity. It features a high-density alloy hook with 360-degree rotation and an anti-falling safety buckle, an aluminum gear box for high work efficiency and heat dissipation, and a 6mm*7.6M (25ft) galvanized anti-rotation wire rope for strength and durability.

High Quality Lifting Hook: Designed for safe, strong, and stable lifting. It includes a protective sleeve and spring to prevent wire rope damage, a heavy hook design to reduce sway, and is made from strong, anti-rust, and durable manganese steel.

Flexible Trolley Installation: The manual trolley allows for flexible installation. Each gasket measures 15mm (0.59 in). Gaskets can be used to fix the steel plate on the side for narrower I-beams or adjust the distance between the two steel plates to suit the I-beam width.

Adjustable Trolley Width: This diagram illustrates how to adjust the trolley's width using the 15mm (0.59 in) gaskets to accommodate various I-beam flange widths, ensuring a secure and proper fit.

Durable & Safe Trolley Design: The trolley features a thickened manganese steel plate for wear-resistance, strength, and durability. A side locking nut provides an anti-loose design, ensuring safe and reliable operation.

Smooth & Stable Running Trolley: Equipped with non-serrated steel wheels that slide smoothly on the I-beam. A balance shaft helps maintain smooth running and prevents unstable shaking during movement.

Nastavení

Vybalování

Opatrně vyjměte všechny součásti z obalu. Zkontrolujte, zda nedošlo k poškození při přepravě. Uschovejte obal pro budoucí skladování nebo přepravu.

Hoist Installation

1. Identify a suitable, structurally sound overhead support (e.g., I-beam, gantry crane) capable of safely supporting the hoist's weight plus the maximum intended load.
2. Hang the hoist's top hook securely onto the chosen support. Ensure the safety latch on the hook is properly closed.
3. Connect the power cable to the hoist and ensure it is not tangled or obstructed.

Trolley Assembly and Installation

1. Assemble the manual trolley according to the provided diagrams, ensuring all bolts and nuts are securely fastened.
2. Measure the width of your I-beam flange. Refer to the 'Flexible Installation' and 'Adjust the width by casing gaskets' sections in the Product Overview.
3. Adjust the trolley's width by adding or removing the 15mm gaskets as needed to match your I-beam. Ensure the trolley wheels fit snugly but can roll freely on the I-beam flange.
4. Mount the assembled trolley onto the I-beam. Ensure the side locking nuts are tightened to prevent loosening during operation.
5. Attach the electric hoist to the trolley's lifting eye or hook. Ensure a secure connection with safety latches engaged.

Připojení napájení

Plug the hoist's power cable into a standard 110V AC grounded electrical outlet. Ensure the power source is stable and capable of supplying the required current for the hoist's 1500W motor.

Návod k obsluze

Obecný provoz

Before each operation, perform a quick visual inspection of the hoist, wire rope, hooks, and trolley for any visible damage or wear. Ensure the area below and around the load is clear.

Použití bezdrátového dálkového ovládání

1. Ensure the 12V/23A battery is correctly installed in the wireless remote.
2. Press the 'UP' button to lift the load.
3. Press the 'DOWN' button to lower the load.
4. The wireless remote allows for operation from a distance of up to 100 meters (328 feet).

Using the Wired Control

1. Hold the wired control unit firmly.
2. Press the 'UP' button to lift the load.
3. Press the 'DOWN' button to lower the load.
4. The wired control provides direct, reliable operation and is splash-proof and impact-resistant.

Ruční ovládání

In case of power failure or specific operational needs, the hoist can be operated manually using the integrated manual control lever. Consult the hoist unit for specific instructions on engaging and using the manual control.

Postupy zvedání

1. Attach the load securely to the hoist hook. Ensure the load is balanced and the safety latch is closed.
2. Slowly begin lifting the load using the chosen control method (wireless or wired). Observe the load for stability.
3. Lift the load only as high as necessary. Avoid sudden movements.
4. When lowering, do so slowly and with control, ensuring the landing area is clear.

Trolley Movement

To move the load horizontally, push or pull the load or the trolley along the I-beam. Ensure the path is clear and free of obstructions. The non-serrated steel wheels and balance shaft ensure smooth and stable running.

Údržba

Regular maintenance is crucial for the longevity and safe operation of your BEAMNOVA hoist and trolley.

Regular Checks (Before Each Use)

• Ocelové lano: Inspect for fraying, kinks, broken strands, or corrosion. Replace if damaged.
• Háčky: Check for deformation, cracks, or wear. Ensure safety latches operate freely and close properly.
• Kolečka na vozíky: Inspect for wear, damage, or flat spots. Ensure they rotate smoothly.
• Elektrické připojení: Check power cable and control cables for cuts, abrasions, or loose connections.
• Spojovací materiál: Ensure all bolts and nuts on both the hoist and trolley are tight.

Lubrication (Monthly or as Needed)

• Apply a light coat of machine oil to the wire rope to prevent corrosion.
• Lubricate the trolley wheel bearings and axles with appropriate grease to ensure smooth movement.
• Consult a qualified technician for internal gear box lubrication if required.

Čištění a skladování

• Wipe down the hoist and trolley with a clean, dry cloth after use to remove dust and debris.
• Store the equipment in a dry, clean environment, away from direct sunlight and corrosive substances.
• If storing for extended periods, ensure the wire rope is clean and lightly oiled.

Odstraňování problémů

Tato část se zabývá běžnými problémy, se kterými se můžete setkat. V případě problémů, které zde nejsou uvedeny, kontaktujte zákaznickou podporu.

Specifikace

Záruka a podpora

BEAMNOVA products are manufactured to high-quality standards. For warranty information, technical support, or replacement parts, please contact BEAMNOVA customer service through the retailer where you purchased the product or visit the official BEAMNOVA webwebu. Při kontaktování podpory si prosím připravte číslo modelu a datum zakoupení.