Claiks CL-TVS

CLAIKS Electric Ceiling TV Mount CL-TVS User Manual

Model: CL-TVS

Zavedení

This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your CLAIKS Electric Ceiling TV Mount, Model CL-TVS. This motorized flip-down bracket is designed to securely hold 32 to 70-inch flat and curved screens, offering convenient remote-controlled viewnastavení úhlu.

Bezpečnostní informace

Před instalací a použitím si pečlivě přečtěte všechna bezpečnostní varování a pokyny. Nedodržení těchto pokynů může vést k poškození majetku, vážnému zranění nebo smrti.

  • Ujistěte se, že montážní povrch unese celkovou hmotnost držáku a televizoru.
  • Nepřekračujte maximální nosnost 45 kg (99 liber).
  • Během instalace vždy používejte vhodné bezpečnostní vybavení.
  • Consult a qualified professional if you are unsure about the installation process or ceiling structure.
  • Udržujte děti a domácí zvířata mimo dosah místa instalace.
  • Do not attempt to modify the mount.
  • Před prováděním jakékoli údržby nebo seřizování odpojte napájení.

Obsah balení

Před zahájením instalace ověřte, zda jsou přítomny všechny součásti. Pokud některé součásti chybí nebo jsou poškozené, kontaktujte zákaznickou podporu.

  • Electric Ceiling TV Mount Assembly
  • Dálkové ovládání (baterie nejsou součástí balení)
  • Sada montážního materiálu (šrouby, hmoždinky, podložky)
  • Držáky na TV
  • Šablona instalace
  • Uživatelská příručka

Specifikace

Číslo modeluCL-TVS
Typ montážeStropní držák
Kompatibilní velikosti TV32 až 70 palců
Maximální nosnost99 lb (45 kg)
Kompatibilita VESA200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, 600x400mm, 200x400mm
Rozsah úhlu náklonu0-75 stupňů
Screen Leveling Adjustment±2 stupňů
MateriálKov
BarvaČerný

Poznámka: Specifikace se mohou změnit bez předchozího upozornění.

Nastavení a instalace

Follow these steps carefully to install your CLAIKS Electric Ceiling TV Mount. It is recommended to have at least two people for installation.

1. Prepare the Mounting Area

Identify the ideal location on your ceiling. This mount is compatible with both flat and pitched roofs. Ensure the ceiling structure is suitable for mounting and can support the weight. The mount is suitable for wood and concrete ceilings. Note: Not for ceilings with dual studs.

CLAIKS Electric Ceiling TV Mount suitable for wood and concrete ceilings

Image: The mount is designed for installation on both wood and concrete ceiling types. Ensure your ceiling structure is appropriate for secure mounting.

2. Mount Dimensions and VESA Compatibility

Before drilling, review the mount dimensions and ensure your TV's VESA pattern is compatible. The mount supports VESA patterns including 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, 600x400mm, and 200x400mm. For 55", 65", and 70" TVs, ensure to center the VESA holes.

Diagram showing CLAIKS TV mount dimensions and VESA compatibility

Image: Detailed diagram illustrating the physical dimensions of the TV mount and supported VESA patterns. This helps in pre-installation planning and ensuring compatibility with your television.

3. Připojte TV držáky

Attach the TV mounting brackets to the back of your television using the provided hardware. Ensure the brackets are securely fastened and aligned with your TV's VESA holes. This mount is compatible with 32-70 inch TVs and can support up to 99 lbs.

CLAIKS TV mount supporting a 32-70 inch TV with a maximum load of 99 lbs

Image: The electric ceiling TV mount securely holding a large television, demonstrating its compatibility with TVs ranging from 32 to 70 inches and its robust 99 lbs load capacity.

4. Mount to Ceiling and Connect Power

Use the installation template to mark drilling points on the ceiling. Securely fasten the main mount assembly to the ceiling using appropriate anchors and screws for your ceiling type. Once the mount is secure, carefully lift and attach the TV (with brackets) to the mount. Connect the power cable to a suitable electrical outlet.

Návod k obsluze

Your CLAIKS Electric Ceiling TV Mount is operated using the included remote control.

1. Dálkové ovládání

Insert batteries (not included) into the remote control. Point the remote control towards the mount's receiver. Use the designated buttons to raise or lower the television. The remote allows for precise control over the mount's movement.

Remote control operating the CLAIKS Electric Ceiling TV Mount

Image: A hand holding the remote control, demonstrating its use to adjust the position of the electric ceiling TV mount. The remote allows for convenient operation from a distance.

2. Seřizování Viewúhel

The mount offers a motorized tilt range of 0 to 75 degrees, allowing you to find the optimal viewing position. Additionally, a ±2 degree leveling adjustment is available to ensure your screen is perfectly horizontal. All adjustments are made via the remote control.

Diagram showing the adjustable tilt range of 0-75 degrees and screen leveling of +/- 2 degrees for the CLAIKS TV mount

Image: A visual representation of the mount's adjustable range, highlighting the 0-75 degree tilt capability and the ±2 degree screen leveling feature for customized viewIng.

Údržba

Pravidelná údržba zajistí dlouhou životnost a bezpečný provoz vašeho televizního držáku.

  • Čištění: Otřete držák měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
  • Inspekce: Pravidelně kontrolujte všechny šrouby a spoje, abyste se ujistili, že jsou pevné a bezpečné.
  • Motor: The motorized mechanism is designed for maintenance-free operation. Do not attempt to lubricate or disassemble the motor.
  • Kabely: Ensure all cables connected to the TV and mount are not pinched or stressed during movement.

Odstraňování problémů

If you encounter issues with your CLAIKS Electric Ceiling TV Mount, refer to the following common problems and solutions:

ProblémMožná příčinaŘešení
Držák se nehýbe.No power; Remote control batteries are dead; Remote not paired; Wiring issue.Check power connection to the mount. Replace remote control batteries. Refer to remote pairing instructions (if applicable). Inspect wiring for loose connections.
Mount is noisy during operation.Normal operation sound; Loose components.A slight motor sound is normal. Check all mounting screws and TV bracket screws for tightness.
Televizor není v rovině.Needs adjustment.Use the remote control's leveling adjustment feature (±2 degrees) to fine-tune the screen's horizontal position.
Mount stops working unexpectedly.Power interruption; Overload; Internal fault.Check power supply. Ensure TV weight does not exceed 99 lbs. Disconnect power for 5 minutes, then reconnect. If the problem persists, contact customer support.

Záruka a zákaznická podpora

CLAIKS products are designed for quality and reliability. For warranty information or technical assistance, please refer to the warranty card included with your product or visit the official CLAIKS website. You may also contact our customer support team directly for any inquiries or issues.

Kontaktní údaje: Please refer to your purchase documentation or the CLAIKS brand store for the most current contact details.

© 2026 Claiks. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.