1. Důležitá bezpečnostní varování
Please read this user manual carefully before operating the desk. Failure to follow these instructions may result in injury or damage to the product.
- Keep fingers and other objects clear of the lifting columns to prevent injury during height adjustments.
- Nepřekračujte maximální nosnost 160 kg (352 lb). Ensure the weight is evenly distributed.
- Ensure the desk is placed on a stable, level surface to prevent tipping.
- Během provozu držte děti a domácí zvířata v dostatečné vzdálenosti od stolu.
- Do not disassemble or modify the desk's components. Contact support for assistance.
2. Nastavení a montáž
The FLEXISPOT EC5 PRO+DT desk is designed for straightforward assembly. All necessary tools and step-by-step instructions are included in the package.
2.1 Vybalení
Carefully unpack all components and verify against the parts list provided in the separate assembly guide. Ensure no parts are missing or damaged.
2.2 Montážní kroky
- Attach the lifting columns to the desk frame using the provided screws.
- Připevněte patky ke spodní části zvedacích sloupků.
- Carefully place the tabletop onto the assembled frame. The tabletop features pre-drilled holes for easy alignment.
- Fasten the tabletop to the frame using the designated screws.
- Connect all motor and control panel cables according to the assembly diagram. Ensure all connections are secure.
- It is recommended to have two people for assembly, especially when handling the heavy tabletop and frame, to ensure safety and ease of installation.
3. Návod k obsluze
The FLEXISPOT EC5 PRO+DT desk features a powerful dual-motor system for smooth and quiet height adjustments.
3.1 Funkce ovládacího panelu
The control panel allows for precise height adjustments and includes memory presets for convenience.
- Šipky nahoru/dolů (▲ / ▼): Stisknutím a podržením můžete plynule upravovat výšku stolu. Uvolněním se nastavení zastaví.
- Height Display: Zobrazuje aktuální výšku stolu v centimetrech.
- Předvolby paměti (1, 2, 3): Press 'M' then a number (1, 2, or 3) to save the current height. To recall a saved height, simply press the corresponding number button.
- Timed Reminder (A): Activates a reminder to change posture after a set period. Refer to the full assembly guide for setting specific intervals.
3.2 Height Adjustment Range
The desk can be adjusted from a minimum height of 62 cm to a maximum height of 127 cm (without tabletop). The dual motors provide a smooth soft-start and soft-stop motion, with an adjustment speed of up to 35 mm/s and a low operating noise level of less than 50 dB.
4. Údržba
Proper maintenance ensures the longevity and optimal performance of your FLEXISPOT desk.
4.1 Čištění
- The tabletop features a scratch-resistant and easy-to-maintain surface. For general cleaning, wipe with a soft, damp tkanina.
- For stubborn marks, use a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive materials that could damage the finish.
- Ensure no liquids seep into the control panel or motor components.
4.2 Obecná péče
- Pravidelně kontrolujte všechny šrouby a spoje, abyste se ujistili, že jsou pevně utažené.
- Avoid placing excessively heavy or sharp objects on the desk that could scratch or dent the surface.
- Do not drag the desk across the floor; lift it when moving to prevent damage to the feet or floor.
5. Řešení problémů
If you encounter issues with your FLEXISPOT desk, refer to the following common troubleshooting steps:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Stůl se nehýbe | Power cable disconnected; Control panel cable loose; Overload; Motor error. | Check power connection. Ensure all cables are securely plugged in. Reduce weight on desk. Unplug for 10 seconds, then plug back in to reset. |
| Stůl se pohybuje nerovnoměrně | Uneven weight distribution; Obstruction. | Distribute weight evenly. Check for any obstructions under or around the desk. |
| Kód chyby na displeji | Specifická systémová chyba. | Refer to the detailed troubleshooting section in the full assembly manual for specific error code interpretations and solutions. Often, a power cycle (unplug and replug) can resolve minor errors. |
If the problem persists after attempting these solutions, please contact FLEXISPOT customer support for further assistance.
6. Specifikace
Detailed technical specifications for the FLEXISPOT EC5 PRO+DT Height Adjustable Desk:
- Značka: FLEXISPOT
- Číslo modelu: EC5 PRO+DT
- Desk Dimensions (L x W x H): 160 cm x 80 cm x 62-127 cm (adjustable height)
- Materiál desky: Wood (FSC-certified MDF with scratch-resistant high-pressure laminate)
- Materiál rámu: Kov
- Barva: White Top + White Frame
- Typ motoru: Duální motor
- Kapacita zatížení: 160 kg (352 lb)
- Height Adjustment Speed: 35 mm/s (max)
- Hladina hluku: < 50 dB
- Vlastnosti: Memory Presets, Timed Reminder, Soft Start/Stop
7. Informace o záruce
Specific warranty terms and conditions for the FLEXISPOT EC5 PRO+DT desk may vary by region and retailer. Please consult your purchase documentation or contact the retailer from whom you purchased the product for detailed warranty information.
Typically, warranties cover manufacturing defects and functional issues under normal use. Damage resulting from misuse, unauthorized modifications, or exceeding load capacity may not be covered.
8. Podpora
For technical assistance, spare parts, or any questions not covered in this manual, please contact FLEXISPOT customer support or your authorized retailer.
When contacting support, please have your product model number (EC5 PRO+DT) and proof of purchase readily available.