1. Úvod
This manual provides essential information for the safe assembly, operation, and maintenance of your Ciays 43-Inch Rectangular Propane Fire Pit. Please read all instructions carefully before using the product to ensure proper function and safety.
Image 1.1: Ciays 43-Inch Rectangular Propane Fire Pit with windshield and protective cover.
2. Důležité bezpečnostní informace
VAROVÁNÍ: Nedodržení těchto pokynů může vést k požáru, výbuchu nebo otravě oxidem uhelnatým, což může způsobit škody na majetku, zranění osob nebo smrt.
- Always maintain a safe distance from the fire pit to combustible materials.
- Use only approved fuel types (Liquefied Petroleum Gas).
- Během používání držte děti a domácí zvířata v dostatečné vzdálenosti od ohniště.
- Always extinguish the fire before leaving or going to sleep.
- Store the fire pit in a cool, dry place when not in use.
- Neskladujte ani nepoužívejte benzín nebo jiné hořlavé výpary a kapaliny v blízkosti tohoto ani jiného spotřebiče.
- Tlaková láhev, která není připojena k použití, nesmí být skladována v blízkosti tohoto nebo jakéhokoli jiného zařízení.
- Pouze pro venkovní použití. Nepoužívejte v interiéru.
- Před montáží a provozem si přečtěte všechny pokyny.
3. Obsah balení
Verify that all components are present before beginning assembly. If any parts are missing or damaged, do not attempt to assemble or operate the fire pit. Contact customer service for assistance.
- Stůl na ohniště
- 304 Stainless Steel H-Burner (pre-installed)
- Glass Stones (for burner area)
- Transparent Wind Guard (glass panels and corner brackets)
- Protective Cover (for tabletop)
- Ignition Battery (AAA or AA, typically included)
- Sada hardwaru (šrouby, podložky, matice)
- Návod k použití
4. Montážní návod
Assembly typically requires two people and takes approximately 60-90 minutes. Tools required: Phillips head screwdriver, adjustable wrench (not included).
- Rozbalte komponenty: Opatrně vyjměte všechny díly z obalu. Položte je na měkký, čistý povrch, abyste zabránili poškrábání.
- Sestavte základní konstrukci: Follow the diagrams in the included paper manual to connect the side panels and base frame. Ensure all screws are tightened securely.
- Připevněte desku stolu: Carefully place the tabletop onto the assembled base. Secure it using the provided hardware.
- Instalace držáku propanbutanové lahve: If not pre-installed, secure the propane tank retention screw or strap inside the cabinet.
- Připojení plynového potrubí: Connect the gas hose from the burner to the control valve, then to the propane tank regulator. Ensure all connections are hand-tight, then use a wrench for a final snug fit. Do not overtighten.
- Place Glass Stones: Distribute the glass stones evenly over the burner area, ensuring not to block the igniter or burner holes.
- Assemble Wind Guard: Attach the glass panels to the corner brackets using the provided hardware. Place the assembled wind guard around the burner opening.
- Install Ignition Battery: Insert the specified battery (e.g., AAA) into the igniter button compartment.
Image 4.1: The fire pit features a spacious 43-inch top and a cabinet for a standard 20 lb propane tank (not included).
5. Návod k obsluze
5.1. Připojení propanbutanové nádrže
- Ensure the control knob on the fire pit is in the "OFF" position.
- Open the cabinet door and place a standard 20 lb propane tank upright inside.
- Connect the regulator hose to the propane tank valve. Turn the black coupling nut clockwise until fully tightened.
- Secure the propane tank using the internal retention mechanism.
- Perform a leak test: Apply a soapy water solution to all gas connections. Open the propane tank valve. If bubbles appear, there is a leak. Close the tank valve immediately and re-tighten connections. Repeat until no bubbles are present. Do not operate if a leak persists.
5.2. Zapálení ohniště
- Ujistěte se, že je ventil propanbutanové lahve zcela otevřený.
- Push and hold the control knob in, then slowly turn it to the "LOW" position.
- While holding the control knob in, press and hold the igniter button repeatedly until the burner ignites.
- Once ignited, continue to hold the control knob in for 15-20 seconds to allow the thermocouple to heat up.
- Release the control knob. If the flame extinguishes, repeat steps 2-4.
5.3. Adjusting the Flame
The fire pit features an infinite adjustment knob, allowing precise control over flame height and heat output.
- To increase flame height and heat, slowly turn the control knob towards the "HIGH" position.
- To decrease flame height and heat, slowly turn the control knob towards the "LOW" position.
Image 5.1: The stepless adjustment switch allows for precise control of flame intensity.
5.4. Turning Off the Fire Pit
- Otočte ovládací knoflík do polohy „VYP“.
- Zavřete ventil na propanbutanové nádrži otáčením ve směru hodinových ručiček, dokud nebude zcela uzavřen.
- Allow the fire pit to cool completely before covering or moving.
6. Údržba
6.1. Čištění
- Vnější povrchy: Wipe with a soft cloth and mild soapy water. Rinse thoroughly and dry completely. Do not use abrasive cleaners or solvents.
- Hořák: Periodically inspect the burner for obstructions (e.g., spider webs, debris). Use a soft brush to clean burner ports.
- Glass Stones: The glass stones can be rinsed with water and allowed to dry before being placed back in the fire pit.
- Ochrana proti větru: Clean glass panels with a glass cleaner and a soft cloth.
6.2. Skladování
- Always ensure the fire pit is completely cool before covering or storing.
- Use the included protective cover to shield the fire pit from weather elements when not in use.
- Store the fire pit in a cool, dry location, away from direct sunlight and moisture.
- Disconnect the propane tank and store it in a well-ventilated area outdoors, away from heat sources and open flames.
7. Řešení problémů
If you encounter issues with your fire pit, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Hořák se nezapálí | No gas flow; Igniter battery dead; Igniter electrode dirty or damaged; Air in gas line | Check propane tank valve; Replace igniter battery; Clean or adjust igniter electrode; Purge air by repeating lighting procedure |
| Low flame or flickering | Low propane level; Regulator issue; Burner ports obstructed | Check propane tank level; Ensure regulator is fully connected; Clean burner ports |
| Plamen zhasne po uvolněníasing control knob | Thermocouple not heated sufficiently; Thermocouple faulty | Hold control knob in for longer (15-20 seconds) after ignition; Contact customer service if issue persists |
| Detekován zápach plynu | Ůnik plynu | Immediately turn off gas at tank. Perform leak test. Do not operate if leak persists. Contact emergency services if odor is strong. |
8. Specifikace
- Značka: Ciays
- Číslo modelu: CIFPT53B-43-US
- Rozměry produktu: 43"H x 25"Š x 25"V
- Materiál: Legovaná ocel
- Typ dokončení: Lakované
- Tvar: Obdélníkový
- Hmotnost položky: 63.93 libry
- Typ paliva: Zkapalněný ropný plyn (LPG)
- Tepelný výkon: 60,000 XNUMX BTU
- Barva: Černý
- UPC: 810158829602
9. Záruka a podpora
For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Ciays webUschovejte si účtenku jako doklad o koupi pro případné reklamace.