1. Úvod
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Tridonic Linear Essence Series 43W Constant Current LED Driver. This driver is designed for US-based LED lighting applications, offering 0-10V dimming capabilities and a robust design for longevity.
2. Bezpečnostní pokyny
VAROVÁNÍ: Risk of electric shock. Installation and servicing must be performed by qualified personnel only. Disconnect power before installation or servicing.
- Zajistěte vstupní objtage (120-277V AC) matches the driver's specifications.
- Do not exceed the maximum output power of 43W.
- This device is UL Class 2 recognized and suitable for dry and damp umístění.
- The driver includes built-in protection against overload, short-circuit, no-load, and over-temperature conditions.
- Comply with all national and local electrical codes.
3. Konec produktuview
The Tridonic Linear Essence Series LED Driver is a compact unit featuring clearly labeled input, output, and dimming terminals, along with a selectable output current switch.
Obrázek 1: Nahoře view of the Tridonic Linear Essence Series 43W LED Driver. The image displays the product label with specifications, input terminals (G, N, L), output terminals (+LED, -LED), 0-10V dimming terminals (0-10V+, 0-10V-), and a switch for selecting output current (915mA or 1000mA).
4. Nastavení a instalace
4.1. Montáž
Mount the LED driver in a suitable enclosure or fixture, ensuring adequate ventilation to prevent overheating. The driver is designed for dry and damp umístění.
4.2. Output Current Selection
Before wiring, select the desired output current using the switch located on the driver. Refer to Figure 1 for the switch location.
- Poloha ON: 1000mA output current.
- 1 pozice: 915mA output current.
Ensure the selected current matches the requirements of your LED module(s).
4.3. Pokyny pro zapojení
All wiring must comply with local and national electrical codes. Use appropriate wire gauges for the current and voltagzapojeni.
- Input Power (PRI): Connect the AC mains supply to the input terminals labeled G (Ground), N (Neutral), and L (Line). The driver accepts 120-277V AC, 50/60Hz.
- LED Output (SEC): Connect the LED module(s) to the output terminals labeled +LED a -LED. Observe correct polarity.
- 0-10V Stmívání: Connect your 0-10V dimmer control wires to the terminals labeled 0-10V+ a 0-10V-. Ensure correct polarity for dimming functionality.
Refer to the product label (Figure 1) for a visual representation of the terminal block layout.
5. Návod k obsluze
5.1. Zapnout
Once all connections are secure and verified, restore power to the LED driver. The connected LED module(s) should illuminate.
5.2. Ovládání stmívání
Use a compatible 0-10V dimmer to adjust the light output. The dimming range is typically 10% to 100%. Ensure your dimmer is properly connected to the 0-10V+ and 0-10V- terminals.
6. Údržba
The Tridonic LED driver is designed for long-term, maintenance-free operation. However, periodic inspection is recommended.
- Ensure the driver is free from dust and debris, which can impede heat dissipation.
- Check wiring connections periodically for tightness and integrity.
- Do not attempt to open or repair the driver. Refer servicing to qualified personnel.
7. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| LED diody nesvítí. |
|
|
| LEDs flicker or dim erratically. |
|
|
| Driver is hot to the touch. |
|
|
8. Specifikace
| Parametr | Hodnota |
|---|---|
| Číslo modelu | LC 43/915-1000/50 0-10V fixC lp SNC UNV |
| Číslo artiklu | 87500870 |
| Typ | Ovladač konstantního proudu LED |
| Rated Supply Voltage (Uin) | 120-277V AC |
| AC svtage Dosah | 108-305V |
| Síťová frekvence | 50/60 Hz |
| Max. Input Power (Pin) | 50W |
| Výstupní výkon (Pout) | 43 W (max.) |
| Výstupní proud (Iout) | Selectable: 915mA or 1000mA |
| Max. Výstupní objemtage (Uout) | 60V DC (30-47VDC operating range) |
| Rozhraní stmívání | 0-10V |
| Rozsah stmívání | 10–100 % |
| Hodnocení IP | IP20 |
| Materiál bydlení | Kov |
| Operating Temperature (tc) | Max. 75 °C |
| Rozměry (D x Š x V) | 11.00" × 1.10" × 0.90" (279.4 mm × 27.9 mm × 22.9 mm) |
| Hmotnost | 7.0 oz (198g) |
| Certifikace | UL 8750 SF3.1, FCC Part 15, DesignLights Consortium 4.3 |
| Nominální životnost | Až 50,000 hodin |
9. Záruka a podpora
9.1. Informace o záruce
This Tridonic LED driver is backed by a 5-year warranty, covering defects in materials and workmanship under normal use and service. Please retain your proof of purchase for warranty claims.
9.2. Technická podpora
For technical assistance or further inquiries, please contact Tridonic customer support or your authorized distributor. Do not attempt to service the unit yourself.