Feit Electric TAPE240/CHASE

Feit Electric 20ft Chasing & Tunable White LED Tape Light User Manual

Značka: Feit Electric

Model: TAPE240/CHASE

Důležité bezpečnostní pokyny

WARNING: INGESTION HAZARD. Tento výrobek obsahuje knoflíkovou nebo knoflíkovou baterii. SMRT or serious injury can occur if ingested. A swallowed button cell or coin battery can cause Vnitřní chemické popáleniny za tak málo 2 hodin. Keep new and used batteries MIMO DOSAH DĚTÍ. Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.

  • Always ensure the power adapter is disconnected from the power source before installation, maintenance, or troubleshooting.
  • Do not expose the tape light or power adapter to excessive heat or direct flame.
  • Do not submerge the tape light or power adapter in water. While designed for indoor/outdoor use, ensure connections are secure and protected from direct water exposure.
  • Only use the provided power adapter and remote control with this product.
  • Do not attempt to repair or modify the tape light or its components. Refer all servicing to qualified personnel.
  • Pro správnou přilnavost se ujistěte, že povrch pro instalaci je čistý, suchý a hladký.
  • Do not bend the tape light sharply or at angles less than 90 degrees to prevent damage to the LED circuits.
  • Uchovávejte obalové materiály mimo dosah dětí.

Obsah balení

Ověřte, zda jsou v balení obsaženy všechny níže uvedené komponenty:

Image showing the contents of the Feit Electric LED Tape Light package, including the coiled tape light, power adapter, remote control, mounting clips, and screws.

Obrázek 1: Obsah balení

  • 1x Feit Electric 20ft Chasing & Tunable White LED Tape Light
  • 1x Dálkové ovládání
  • 1x napájecí adaptér
  • 10x montážní klips
  • 20x šrouby

Specifikace

Detailed technical specifications for the Feit Electric LED Tape Light:

Číslo modeluTAPE240/CHASE
Délka20 stop (6.1 metrů)
Linkable LengthAž 40 stop (12.2 metrů)
Světelný výkon1000 lumenů (jas bílé)
Spotřeba energie24 wattů
svtage24 V DC
Světlá barvaRGB (Red, Green, Blue) + Tunable White
Speciální funkceRemote Controlled, Dimmable, Chasing Effects, Cut-to-Size, Linkable
Vnitřní/venkovní použitíYes (Weather Resistant)
Životnost25,000 hodiny
Rozměry (šířka)0.4 palců (10 mm)
Kontrolní metodaInfračervené dálkové ovládání
Diagram illustrating the 20ft total length of the LED tape light and key features like color changing, tunable white, 1000 lumens, plug-in, ON/OFF/DIM, linkable, indoor use, and remote control.

Obrázek 2: Vlastnosti a rozměry produktu

Průvodce nastavením

Follow these steps for proper installation of your LED Tape Light:

  1. Naplánujte si rozvržení: Before peeling the adhesive, unroll the tape light and lay it out in your desired location to confirm the length and placement. Ensure the power adapter can reach an outlet.
  2. Připravte povrch: Clean the installation surface thoroughly. It must be dry, smooth, and free of dust, dirt, or grease for optimal adhesive performance.
  3. Řezání na míru (volitelné): If a shorter length is required, locate the designated cutting marks on the tape light (typically indicated by a scissor icon or copper pads). Cut only at these marked points to avoid damaging the circuit.
  4. Apply the Tape Light: Carefully peel off the backing from the adhesive strip on the back of the tape light. Press the tape light firmly onto the prepared surface, working in small sections to ensure good contact and avoid air bubbles.
  5. Zabezpečení pomocí klipů (volitelné): For added security, especially on textured surfaces or in high-traffic areas, use the included mounting clips and screws. Space them evenly along the tape light.
  6. Připojte napájení: Plug the tape light connector into the power adapter. Then, plug the power adapter into a standard electrical outlet.
  7. Link Multiple Strips (Optional): If linking multiple 20ft strips (up to a maximum of 40ft total), connect them end-to-end using the integrated connectors. Ensure the power supply is adequate for the total length.
An image showing the Feit Electric LED tape light installed under kitchen cabinets, emitting a soft blue light, demonstrating an indoor application.

Obrázek 3: Přample Indoor Installation (Kitchen)

An image showing the Feit Electric LED tape light installed along the ceiling of an outdoor patio, displaying multiple colors, demonstrating an outdoor application.

Obrázek 4: Přample Outdoor Installation (Patio)

Návod k obsluze

Control your Feit Electric LED Tape Light using the included remote control:

Image of the Feit Electric LED tape light coiled with the remote control next to it, showing the various buttons for color, mode, and brightness.

Figure 5: Remote Control and Tape Light

  • Zapnutí/vypnutí: Stiskněte tlačítko Tlačítko napájení (red button, top right) to turn the lights on or off.
  • Nastavení jasu: Použijte Jas nahoru (▲) a Snížení jasu (▼) buttons to adjust the light intensity.
  • Výběr barvy:
    • Stiskněte tlačítko RGB color buttons (Red, Green, Blue, etc.) to select a static color.
    • Stiskněte tlačítko "W" button for Tunable White light.
  • Dynamické režimy:
    • ChasinÚčinky: Použijte "Chase" button to activate dynamic chasing light patterns.
    • Další režimy: Explore buttons like "Flash", "Strobe", "Fade"a "Smooth" for various light transitions and effects.
    • Nastavení rychlosti: Použijte Urychlit a Rychlost Down buttons to control the pace of dynamic modes.
  • Funkce časovače: Some remotes may include a timer function. Refer to the remote's specific markings for details.
An image showing the Feit Electric LED tape light installed under kitchen cabinets, emitting a vibrant red light, demonstrating a color changing option.

Figure 6: Kitchen with Red Light

An image showing the Feit Electric LED tape light installed under kitchen cabinets, emitting a warm white light, demonstrating a tunable white option.

Figure 7: Kitchen with Warm White Light

An image showing the Feit Electric LED tape light installed under kitchen cabinets, emitting a cool white light, demonstrating another tunable white option.

Figure 8: Kitchen with Cool White Light

Údržba

To ensure the longevity and optimal performance of your LED Tape Light, follow these maintenance guidelines:

  • Čištění: Disconnect the power adapter before cleaning. Use a soft, dry, or slightly damp cloth to wipe the tape light. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the product.
  • Inspekce: Periodically inspect the tape light and power adapter for any signs of damage, such as frayed wires, cracks, or loose connections. If any damage is found, discontinue use and contact customer support.
  • Skladování: If storing the tape light for an extended period, ensure it is clean and dry. Coil it loosely to prevent kinks or damage to the LED strip. Store in a cool, dry place away from direct sunlight.
  • Výměna baterie (dálkový ovladač): If the remote control's range or responsiveness decreases, the battery may need replacement. Refer to the remote's battery compartment for the correct battery type (typically a CR2025 or similar coin cell battery) and replacement instructions. Ensure proper polarity.

Odstraňování problémů

If you encounter issues with your Feit Electric LED Tape Light, refer to the following common problems and solutions:

ProblémMožná příčinaŘešení
Světla se nerozsvítí.Žádné napájení, uvolněné připojení, vadný napájecí adaptér.
  • Ujistěte se, že je napájecí adaptér bezpečně zapojen do funkční zásuvky.
  • Check all connections between the tape light and the power adapter.
  • Zkuste zapojit do zásuvky jiné zařízení, abyste se ujistili, že je pod proudem.
Dálkové ovládání nefunguje.Remote battery is dead, remote is too far, obstruction, IR receiver blocked.
  • Replace the battery in the remote control (CR2025).
  • Ensure there are no obstructions between the remote and the tape light's IR receiver.
  • Namiřte dálkový ovladač přímo na IR přijímač.
  • Ensure you are within the remote's operating range.
Světla jsou slabá nebo blikají.Insufficient power, damaged section of tape light, loose connection.
  • Ensure the power adapter is correctly rated for the total length of tape light connected.
  • Zkontrolujte všechna připojení, zda nejsou uvolněná.
  • If only a section is affected, that part of the tape light may be damaged.
Lepidlo nelepí.Improper surface preparation, surface type.
  • Ensure the surface was clean, dry, and smooth before application.
  • For textured or porous surfaces, use the included mounting clips and screws for a more secure installation.

Informace o záruce

This Feit Electric LED Tape Light is covered by a 1letá záruka výrobce od data nákupu. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání. Nevztahuje se na škody způsobené nesprávným použitím, zneužitím, nehodami, neoprávněnými opravami nebo úpravami. Uschovejte si doklad o koupi pro případné reklamace.

Zákaznická podpora

For further assistance, technical support, or warranty inquiries, please contact Feit Electric customer support.

Visit our online support portal for FAQs and contact options:
https://help.feit.com/hc/en-us