Amazon Basics Steam Mop for Hard Floors

Zavedení

Thank you for choosing the Amazon Basics Steam Mop. This manual provides important information for the safe and efficient operation of your new steam mop. Please read it thoroughly before use and keep it for future reference. This 1200W steam mop is designed to effectively clean and sanitize sealed hard floors using only tap water, eliminating 99.9% of bacteria without harsh chemicals.

Bezpečnostní informace

Při používání elektrických spotřebičů vždy dodržujte základní bezpečnostní opatření, abyste snížili riziko požáru, úrazu elektrickým proudem nebo zranění.

• Nenechávejte parní mop bez dozoru, když je zapojený do zásuvky.
• Do not use the appliance on unsealed wooden floors or unglazed ceramic tiles, as steam can cause damage.
• Udržujte spotřebič mimo dosah dětí a domácích zvířat.
• Use only tap water in the water tank. Do not add cleaning solutions, perfumes, or other chemicals, as this may damage the appliance and void the warranty.
• Always unplug the appliance before filling or emptying the water tank, or before performing maintenance.
• Během používání se ujistěte, že napájecí kabel není poškozený ani zamotaný.

Obsah balení

Ověřte, zda jsou všechny položky přítomny a v dobrém stavu:

• 1 x Amazon Basics Steam Mop
• 3 x Washable Microfiber Pads
• 1 x Filling Flask
• 1 x Plastic Scrubber

Image: The complete cleaning kit, including the steam mop, three microfiber pads, a filling flask, and a plastic scrubber.

Konec produktuview

The Amazon Basics Steam Mop features a lightweight design with a self-standing function for convenient storage. It includes an extra-long 6m power cord with a cable management hook.

Image: The Amazon Basics Steam Mop in its upright, self-standing position.

Nastavení

1. Sestavení mopu: Připojte rukojeť k hlavní části parního mopu, dokud bezpečně nezacvakne.
2. Připevnění mikrovláknové podložky: Place one of the washable microfiber pads onto the mop head, ensuring it is securely attached.
3. Naplňte vodní nádrž: Open the water tank cap. Use the provided filling flask to pour up to 450ml of clean tap water into the tank. Do not overfill. Close the cap securely.

Image: A hand pouring water into the steam mop's water tank using the provided filling flask.

Návod k obsluze

1. Zapnutí: Plug the steam mop into a suitable electrical outlet. The indicator light will illuminate.
2. Zahřátí: Wait approximately 30 seconds for the mop to heat up and produce steam.
3. Vyberte úroveň páry: The mop features 3 steam levels (high/medium/low). Select the appropriate level for your cleaning needs using the control button.
4. Zahájení čištění: Move the steam mop slowly and steadily across the sealed hard floor surface. The steam will clean and sanitize as you go. For stubborn spots, hold the mop over the area for a few seconds.
5. Dokončovací čištění: When finished, unplug the mop and allow it to cool down before emptying any remaining water and removing the microfiber pad.

Image: Key features of the steam mop, highlighting its ability to clean sealed hard floors without chemicals, quick 30-second heat-up time, and a 6.10m power cable for extended reach.

Údržba

• Cleaning Microfiber Pads: The microfiber pads are machine-washable. Wash them with similar colors and air dry. Do not use bleach or fabric softener.
• Vyprázdnění nádrže na vodu: After each use, ensure the water tank is emptied to prevent mineral buildup.
• Skladování: Store the steam mop in an upright position using its self-standing feature. Use the cable management hook to keep the power cord tidy.
• Odvápnění: If you notice reduced steam output, descaling may be necessary. Consult the full product manual for detailed descaling instructions.

Odstraňování problémů

Specifikace

Záruka a podpora

Your Amazon Basics Steam Mop is covered by a limited warranty. For detailed information regarding warranty terms, conditions, and how to obtain support, please refer to the warranty card included in your product packaging or visit the official Amazon Basics website. For technical assistance or customer service inquiries, please contact Amazon customer support.