CAT Construction Workforce Jumbo Tower Crane Set

1. Úvod

This instruction manual provides comprehensive guidance for the assembly, operation, and maintenance of your CAT Construction Workforce Jumbo Tower Crane Set. Please read this manual thoroughly before use to ensure safe and correct operation. This product is designed for ages 5 and up.

2. Bezpečnostní informace

• Nebezpečí udušení: Obsahuje malé části. Není vhodné pro děti do 3 let.
• Vždy dohlížejte na děti během hry.
• Chraňte výrobek před vodou a nadměrnou vlhkostí.
• Do not attempt to lift objects heavier than recommended by the manufacturer.
• Před použitím se ujistěte, že jsou všechny díly bezpečně smontovány.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny níže uvedené komponenty:

• Tower Crane components
• Dálkové ovládání
• Articulated Figure (4 inches)
• Freewheeling Skid Steer Vehicle
• Wrecking Ball attachment
• Hákový nástavec
• Magnetický držák
• USB nabíjecí kabel

The set includes various parts for the crane structure, a remote control, a construction figure, a skid steer, and multiple attachments for diverse play scenarios.

4. Montážní návod

The CAT Construction Workforce Jumbo Tower Crane Set is designed for quick and easy assembly. Follow these steps to set up your crane:

1. Attach the base supports to the main base unit.
2. Connect the tower sections, ensuring they lock securely into place.
3. Mount the crane cabin and boom assembly to the top of the tower.
4. Secure the counterweight section to the rear of the boom.
5. Thread the hoist cable through the designated pulleys and attach the desired lifting accessory (hook, wrecking ball, or magnet).

For a visual guide on assembly and initial setup, please refer to the video below:

5. Instalace baterie

The crane unit is USB rechargeable. Use the provided USB cable to charge the crane's internal battery. The remote control requires 2 AA batteries (included).

1. Pro dálkové ovládání: Locate the battery compartment on the back of the remote. Open the compartment and insert 2 AA batteries, ensuring correct polarity (+/-). Close the compartment securely.
2. For the Crane Unit: Connect the USB charging cable to the designated port on the crane unit. Plug the other end into a compatible USB power source. The crane's light may indicate charging status.

6. Návod k obsluze

Once assembled and powered, use the wireless remote control to operate the crane's functions:

• Otáčení: Use the directional controls on the remote to rotate the crane's boom 360 degrees.
• Lifting/Lowering: Use the dedicated buttons to raise or lower the hook and its attached load.
• Pohyb vozíku: Controls allow the trolley to move along the boom, extending or retracting the hook's reach.
• Pracovní světlo: The crane features a built-in light on top that illuminates during operation, enhancing realism.

The set also includes a 4-inch articulated figure and a freewheeling skid steer vehicle for expanded play scenarios.

Observe the crane in action with its various functions:

7. Údržba

• Clean the crane and accessories with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Pokud výrobek nepoužíváte, skladujte jej na chladném a suchém místě mimo dosah přímého slunečního záření.
• Pokud hračku nebudete delší dobu používat, vyjměte baterie z dálkového ovladače.

8. Řešení problémů

• Jeřáb nereaguje: Check if the crane unit is charged and the remote control batteries are correctly installed and have sufficient power. Ensure the crane and remote are within operating range.
• Weak lifting power: Ensure the crane's battery is fully charged. Avoid attempting to lift objects exceeding the crane's capacity.
• Přerušovaný provoz: Check for any obstructions to the remote control's signal or interference from other electronic devices.

9. Specifikace

10. Záruka a podpora

For warranty information and customer support, please refer to the contact details provided on the product packaging or visit the official Funrise, Inc. webwebu. Uschovejte si účtenku jako doklad o koupi.