Návod k obsluze bezpečnostního světla CLY 50W LED s pohybovým senzorem

1. Úvod

Děkuji za nákupasing the CLY 50W LED Motion Sensor Security Light. This manual provides essential information for the safe installation, operation, and maintenance of your new security light. Please read these instructions thoroughly before installation and retain them for future reference.

Image 1.1: CLY 50W LED Motion Sensor Security Light. This image displays the complete security light unit, including the main LED panel, the motion sensor, the attached 1.5-meter power cord with a plug, and mounting screws.

2. Bezpečnostní informace

• Před instalací nebo servisem vždy odpojte napájení.
• Pokud si nejste jisti elektrickým zapojením, měl by instalaci provést kvalifikovaný elektrikář.
• Ujistěte se, že montážní plocha unese hmotnost svítidla.
• Do not look directly into the LED light source when illuminated, as it may cause eye strain or damage.
• This product is designed for outdoor use and is IP66 waterproof (IP65 for the sensor). Ensure all connections are secure and protected from moisture.
• Produkt žádným způsobem neupravujte, mohlo by dojít ke ztrátě záruky a k ohrožení bezpečnosti.

3. Obsah balení

Před instalací ověřte, zda jsou všechny komponenty přítomny:

• CLY 50W LED Motion Sensor Security Light (1 unit)
• Montážní konzola (předmontovaná)
• Mounting Screws and Wall Plugs (typically 3 sets)
• Návod k použití (tento dokument)

4. Vlastnosti produktu

• Moc: 50W LED
• Jas: 4700 XNUMX lumenů
• Teplota barev: 6500K (denní bílá)
• Úhel osvětlení: 120°
• Pohybový senzor: Infrared Human Body Induction (PIR)
• Snímací vzdálenost: Až 12 metrů
• Fixed Lighting Time: 30 seconds per activation
• Provozní režim: Night-only operation (fixed, non-adjustable)
• Hodnocení voděodolnosti: IP66 (light fixture), IP65 (sensor)
• Délka kabelu: 1.5 meters with standard plug
• Materiál: Plastic-clad aluminum for enhanced heat dissipation and corrosion resistance
• Nastavitelný držák: 180° rotation for flexible installation

Image 4.1: Key features of the CLY security light. This image highlights the use of high-quality nanomaterials for light penetration, the excellent heat dissipation design of the plastic-clad aluminum body, and the convenience of the 1.5-meter cable with a plug.

5. Nastavení a instalace

The CLY 50W LED Motion Sensor Security Light is designed for straightforward installation with its pre-attached bracket and plug-in cord.

5.1 Doporučená výška instalace

For optimal motion detection and lighting coverage, the recommended installation height is between 5 to 7 meters (approximately 16 to 23 feet) from the ground.

5.2 Montážní pokyny

1. Vyberte umístění: Select a suitable outdoor location that provides the desired lighting coverage and motion detection area. Ensure the location is within reach of a power outlet for the 1.5M cord.
2. Označte vrtné body: Hold the mounting bracket against the desired surface (wall, ceiling, or ground) and mark the positions for the mounting screws.
3. Vrtací otvory: Drill holes at the marked positions. Insert the provided wall plugs if installing into masonry or concrete.
4. Bezpečné upevnění: Align the bracket with the drilled holes and secure the light fixture using the provided screws. Ensure it is firmly attached.
5. Upravit úhel: Loosen the screws on the side of the bracket to adjust the light's angle (up to 180°) for optimal illumination. Tighten the screws once the desired angle is set.
6. Připojte napájení: Plug the 1.5M power cord into a suitable outdoor electrical outlet.

Image 5.1: This image illustrates the product dimensions (16cm width, 18cm height), the 180-degree adjustable bracket, and three common installation methods: ceiling, wall, and ground installation.

Image 5.2: This image demonstrates the adjustability of the motion sensor, showing its ability to tilt 180 degrees and rotate 360 degrees for precise detection area coverage.

6. Návod k obsluze

The CLY 50W LED Motion Sensor Security Light features a simplified, fixed operating mode for ease of use and energy efficiency.

6.1 Automatický provoz

• Aktivace pouze v noci: The motion sensor is designed to operate exclusively at night. It will not activate during daylight hours.
• Fixed Lighting Duration: Upon detecting motion, the light will illuminate for a fixed duration of 30 seconds. This duration is not adjustable.
• No Manual Adjustment: There are no buttons or settings to adjust the lighting time or the day/night sensor. The unit is designed for immediate use after installation.

Image 6.1: This image demonstrates the fixed operating mode. It shows the light activating for 30 seconds upon motion detection at night and remaining off during the day, emphasizing the non-adjustable nature of these settings.

6.2 Motion Sensor Sensitivity

The PIR (Passive Infrared) motion sensor is sensitive and designed to detect human body movement up to 12 meters away within a 180° detection range. Ensure the sensor is not obstructed by objects or foliage for optimal performance.

7. Údržba

The CLY 50W LED Motion Sensor Security Light requires minimal maintenance.

• Čištění: Pravidelně čistěte svítidlo a čočku senzoru měkkým hadříkem.amp cloth to remove dust, dirt, or debris. Do not use abrasive cleaners or solvents.
• Inspekce: Regularly inspect the power cord and plug for any signs of damage. Ensure the mounting screws remain tight.
• překážky: Keep the area around the motion sensor clear of any obstructions that might block its detection range.

8. Řešení problémů

If you encounter issues with your CLY security light, refer to the following common solutions:

9. Specifikace

Image 9.1: This image highlights the durability features of the CLY security light, including its IP66 waterproof rating, and resistance to both heat and cold, making it suitable for various outdoor weather conditions.

10. Záruka a podpora

For warranty information and customer support, please refer to the documentation provided with your purchase or contact the retailer where the product was acquired. Keep your proof of purchase for warranty claims.