JHS Pedals COLOUR BOX 10 Instruction Manual

Zavedení

The JHS Pedals COLOUR BOX 10 is a studio-quality preamp, EQ, and distortion unit designed for compatibility with various instruments. This manual provides detailed instructions for its setup, operation, and maintenance.

Obsah balení

Před zahájením instalace se ujistěte, že jsou k dispozici všechny položky:

• COLOUR BOX 10 Pedal
• Přepínač vstupu
• Napájecí kabel

Klíčové vlastnosti

• Incorporates an Output Transformer for enhanced signal integrity.
• Safely Handles 48V Phantom Power, suitable for condenser microphones.
• Precision EQ Control with dedicated EQ Shift Knobs for detailed tone shaping.
• Ultra Clean Headroom with Hi/Lo Switch for versatile gain stagIng.
• Consistent Clean Signal on Acoustic Guitar, preserving natural tone.
• Silent Operation, No Switch-Pop, ensuring smooth performance transitions.
• Powered by Standard 9V DC Negative Power for easy integration into existing setups.

Ovládací prvky a připojení

The COLOUR BOX 10 features a comprehensive set of controls for precise sound sculpting. Refer to the image below for a visual guide to the pedal's layout.

Obrázek 1: Nahoře view of the JHS Pedals COLOUR BOX 10, showing all control knobs and switches.

Ovládací knoflíky:

• Zvládnout: Ovládá celkovou výstupní hlasitost pedálu.
• Pre-Vol: Adjusts the input gain, influencing the amount of saturation and distortion.
• Krok: A stepped gain control that adds distinct stages of gain and color to the signal.
• Hi Pass: Controls the cutoff frequency for the high-pass filter. Turning clockwise increases the cutoff frequency, removing more low-end.
• Ztrojnásobit: Adjusts the high-frequency equalization.
• Střední: Adjusts the mid-frequency equalization.
• Bas: Adjusts the low-frequency equalization.
• Posun výšek: Shifts the center frequency of the Treble EQ band.
• Mid Shift: Shifts the center frequency of the Middle EQ band.
• Bass Shift: Shifts the center frequency of the Bass EQ band.

Přepínače:

• Hi Pass Toggle Switch: Activates or deactivates the Hi Pass filter.
• Hi/Lo Toggle Switch: Selects between high and low headroom modes, affecting the overall gain structure and clean signal.

Spojení:

• Input (1/4" TRS): Connect your instrument or microphone.
• Výstup (XLR): Connect to an audio interface, mixer, or ampživější.
• Vstup napájení 9V DC: Connect a standard 9V DC negative center power supply.

Průvodce nastavením

1. Připojení napájení: Connect the provided 9V DC power cable to the pedal's power input. Ensure you use a standard 9V DC negative center power supply.
2. Instrument/Microphone Input: Connect your instrument (e.g., guitar, bass) or microphone to the 1/4" TRS input jack. If using a microphone requiring phantom power, the COLOUR BOX 10 can safely handle 48V phantom power.
3. Výstupní připojení: Connect the XLR output of the COLOUR BOX 10 to your audio interface, mixing console, or ampživější.
4. Počáteční nastavení: Before powering on, set all control knobs to their middle position (12 o'clock) and ensure both toggle switches are in their neutral or 'off' position (if applicable, for Hi Pass).
5. Zapnutí: Apply power to the pedal. The indicator LED should illuminate.

Návod k obsluze

The COLOUR BOX 10 offers extensive tonal possibilities. Experiment with the controls to find your desired sound.

Ziskytaging:

• Použijte Pre-Vol knob to adjust the initial gain. Higher settings will introduce more saturation and distortion.
• The Krok knob provides incremental gain stages, adding character and drive.
• The Ahoj/Lo toggle switch selects between two headroom settings. 'Hi' offers more clean headroom, while 'Lo' provides earlier breakup and compression.

Vyrovnání:

• Upravte Ztrojnásobit, Střednía Bas knobs to shape your tone.
• Využijte Treble Shift, Mid Shifta Bass Shift knobs to fine-tune the frequency centers of each EQ band, allowing for precise tonal adjustments.
• The Ahoj Pass filter, activated by its toggle switch, can be used to remove unwanted low-end rumble or to tighten up your sound. Adjust the Ahoj Pass knob to set the cutoff frequency.

Výstupní úroveň:

The Zvládnout knob controls the final output volume. Adjust this to match the input level of your next device in the signal chain.

Údržba

• Čištění: K čištění vnější strany pedálu používejte měkký, suchý hadřík. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Skladování: Pedál skladujte v suchém prostředí, mimo dosah extrémních teplot a vlhkosti.
• Napájení: Always use the correct 9V DC negative center power supply to prevent damage.

Odstraňování problémů

Specifikace

Záruka a podpora

For warranty information and technical support, please refer to the official JHS Pedals webnebo se obraťte přímo na jejich zákaznický servis. Uschovejte si doklad o koupi pro případ reklamace.

JHS Pedals Official Webmísto: www.jhspedals.com