Giantex GT-11170-NP

Giantex Outdoor Glider Chair GT-11170-NP Instruction Manual

Model: GT-11170-NP

Zavedení

Thank you for choosing the Giantex Outdoor Glider Chair. This manual provides essential information for the safe assembly, proper operation, and effective maintenance of your new glider chair. Please read these instructions thoroughly before assembly and retain them for future reference.

Giantex Outdoor Glider Chair, Navy color, with thick cushions and metal frame.

Image: The Giantex Outdoor Glider Chair in Navy, showcasinjeho design a polštáře.

Bezpečnostní informace

Pro zajištění bezpečného provozu a prevenci zranění nebo poškození dodržujte prosím následující bezpečnostní opatření:

  • Keep the glider chair away from open flames, water, or direct heat sources.
  • Nepřekračujte maximální nosnost 150 kg (330 liber).
  • Always use the chair on a stable, level surface to prevent tipping.
  • Do not leave the chair unattended while in use, especially with children or pets nearby, to prevent accidents.
  • Před každým použitím se ujistěte, že jsou všechny šrouby a upevňovací prvky bezpečně utaženy.

Obsah balení

Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact Giantex customer service.

Diagram showing all components of the Giantex Outdoor Glider Chair, including frame parts, cushions, and hardware.

Obrázek: Rozložený view of the glider chair components, including frame, cushions, and hardware.

Typický obsah balení zahrnuje:

  • Glider Frame Components (various metal pipes and bars)
  • Sedák
  • Zadní polštář
  • Sada hardwaru (šrouby, podložky, matice, imbusový klíč)
  • Návod k použití

Nastavení a montáž

Assembly of the Giantex Outdoor Glider Chair is designed to be straightforward. Follow these steps carefully, referring to the numbered parts and diagrams provided in the included guide book.

  1. Rozbalte komponenty: Opatrně vyjměte všechny díly z obalu a položte je na čistý, měkký povrch, abyste zabránili poškrábání. Zkontrolujte všechny díly podle obsahu balení.
  2. Identifikujte díly: Each part is numbered. Match the numbers to the diagrams in the instruction guide. Pay close attention to the orientation of each piece as incorrect alignment can make assembly difficult.
  3. Sestavte základní rám: Begin by connecting the main base frame components using the provided bolts and the Allen wrench. Do not fully tighten bolts until all components are loosely assembled.
  4. Attach Seat and Back Frames: Connect the seat and back support frames to the base. Ensure all holes align properly. If holes do not align easily, re-check the orientation of the connected pieces. Slight adjustments may be needed.
  5. Install Gliding Mechanism: Secure the gliding arms to the main frame and seat frame. Ensure the mechanism moves freely before tightening.
  6. Připevněte područky: Secure the curved armrests to the chair frame.
  7. Konečné utažení: Once all components are loosely assembled and correctly oriented, systematically tighten all bolts using the Allen wrench. Ensure all connections are firm and secure.
  8. Umístěte polštáře: Position the thick foam seat and back cushions onto the chair.
Diagram illustrating step-by-step assembly of the glider chair frame.

Image: Visual guide for assembling the glider chair, showing key connection points.

Tip: If you encounter difficulty aligning holes, double-check that all pieces are oriented correctly. Sometimes, rotating a piece 180 degrees can resolve alignment issues. Do not force connections.

Návod k obsluze

The Giantex Outdoor Glider Chair is designed for smooth, comfortable gliding motion. To operate:

  • sezení: Sedněte si uprostřed židle a ujistěte se, že máte rovnoměrně rozloženou váhu.
  • Klouzavý pohyb: Gently push off with your feet to initiate the smooth rocking motion. The well-designed gliding structure keeps your weight centered for stability.
  • Komfortní vlastnosti: Enjoy the support provided by the curved armrests and high backrest, complemented by the thick foam cushions.
Illustration of the smooth rocking motion of the glider chair.

Image: Depiction of the glider chair's smooth rocking mechanism, highlighting its stable movement.

Person relaxing in the glider chair, highlighting the cozy sitting design with curved armrests, soft foam cushions, and high backrest.

Image: A user enjoying the chair, illustrating the ergonomic design with curved armrests, soft foam cushions, and a high backrest for comfort.

Údržba

Regular maintenance will extend the life and appearance of your Giantex Outdoor Glider Chair.

  • Čištění povrchu: The seat surface can be cleaned with a damp towel. For stubborn stains, use a mild soap solution and rinse thoroughly. Avoid harsh chemicals.
  • Péče o rám: Otřete kovový rám reklamouamp cloth to remove dust and dirt. Ensure the frame is dry after cleaning to prevent rust.
  • Péče o polštář: While the fabric is durable and water-resistant, it is recommended to store cushions indoors during prolonged periods of rain or harsh weather to maintain their quality.
  • Kontrola upevňovacích prvků: Pravidelně kontrolujte všechny šrouby a upevňovací prvky, zda jsou pevně utažené. V případě potřeby je dotáhněte.
Close-up images showing non-slip footpads, sprayed metal pipe construction, and a hand cleaning the chair surface with a damp ručník.

Image: Details on the chair's construction, including non-slip footpads, sprayed metal frame, and instructions for easy cleaning of the surface.

Odstraňování problémů

If you encounter issues with your glider chair, refer to the following common problems and solutions:

ProblémMožná příčinaŘešení
Otvory se během montáže nezarovnávají.Nesprávná orientace součástí.Review the assembly diagrams carefully. Try rotating the piece 180 degrees. Do not force parts together. Loosen other connections to allow for slight adjustment.
Židle se zdá nestabilní nebo se kymácí.Uvolněné spojovací prvky; nerovný povrch.Ensure all bolts are fully tightened. Place the chair on a flat, level surface.
Gliding motion is not smooth or makes noise.Loose connections in the gliding mechanism; debris.Check and tighten all bolts related to the gliding mechanism. Inspect for any obstructions or debris in the gliding path and remove them.

Specifikace

Detailed specifications for the Giantex Outdoor Glider Chair GT-11170-NP:

  • Značka: Giantex
  • Název modelu: Outdoor Glider
  • Číslo modelu položky: GT-11170-NP
  • Barva: námořnictvo
  • Rozměry produktu: 28.5"H x 26"Š x 35"V (72.4 cm H x 66 cm Š x 88.9 cm V)
  • Výška sedáku: 17.5 palce (44.5 cm)
  • Hloubka sedadla: 19.5 palce (49.5 cm)
  • Délka sedadla: 22 palce (55.9 cm)
  • Styl zad: Vysoká záda
  • Styl paže: Zakřivený
  • Výplňový materiál: Pěna
  • Maximální hmotnost Doporučení: 330 liber (150 kg)
  • Hmotnost položky: 32 liber (14.5 kg)
  • Vnitřní/venkovní použití: Venkovní
  • Zahrnuté komponenty: Outdoor Glider Chair, Cushions, Hardware
Detailed product dimensions of the Giantex Outdoor Glider Chair, including height, width, depth, seat height, and load capacity.

Image: Diagram showing the precise dimensions and load capacity of the glider chair.

Záruka a podpora

Giantex is committed to providing quality products. While specific warranty details are not included in this manual, please retain your proof of purchase. For any questions, missing parts, or support needs, please contact Giantex customer service through their official webna webu nebo u prodejce, kde byl produkt zakoupen.

You can visit the official Giantex store for more information: Giantex Store

© 2025 Giantex. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.