Polibi Queen Murphy Chest Bed Instruction Manual

Zavedení

Thank you for choosing the Polibi Queen Murphy Chest Bed. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Bezpečnostní informace

• Vždy přesně dodržujte montážní pokyny. Nesprávná montáž může vést k nestabilitě a zranění.
• Před použitím se ujistěte, že je veškerý spojovací materiál bezpečně utažený. Pravidelně kontrolujte a v případě potřeby dotahujte.
• Do not allow children to play on or around the bed without adult supervision.
• Keep hands and fingers clear of moving parts when folding or unfolding the bed.
• Do not exceed the maximum weight capacity of 500 lbs for the Queen size bed.
• Use only the recommended mattress type and thickness (6-inch tri-fold mattress, not included).
• Place the bed on a level, stable surface.
• Ensure the electrical outlet for the charging station is properly grounded and rated for the device's power requirements. Do not overload the charging station.

Obsah balení

Your Polibi Queen Murphy Chest Bed will arrive in two boxes. Please verify that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, contact customer support immediately.

Mezi typické komponenty patří:

• Cabinet panels (front, back, sides, top)
• Bed frame components (slats, supports)
• Součásti zásuvky
• Hardware pack (screws, bolts, cam locks, etc.)
• USB charging station unit
• Návod k montáži

Nastavení a montáž

Assembly requires two adults. Please follow the detailed step-by-step instructions provided in the separate assembly guide included with your product. The general process involves:

1. Vybalení všech součástí a jejich porovnání se seznamem dílů.
2. Assembling the main cabinet structure.
3. Installing the bed frame mechanism and slats.
4. Assembling and inserting the storage drawer.
5. Connecting the USB charging station.

Poznámka:

• The two boxes may not arrive on the same day.
• Ensure all connections are tight and stable before using the bed.

Návod k obsluze

Skládání a rozkládání postele

1. Rozbalit: Ensure the area in front of the cabinet is clear. Gently pull the front panel of the cabinet forward and down. The bed frame will extend outwards. Continue to lower the bed frame until it rests securely on the floor supports.
2. Složit: Remove all bedding and mattress from the bed frame. Lift the bed frame from the foot end, guiding it upwards and inwards towards the cabinet. Ensure the frame locks securely into the upright cabinet position.

Using the Integrated USB Charging Station

The Polibi Murphy Chest Bed includes a built-in USB charging station and standard electrical outlets located on the side of the cabinet. To use:

1. Plug the bed's power cord into a wall outlet.
2. Connect your devices to the USB ports or standard outlets.

This feature allows convenient charging of electronic devices while the bed is in use or in its cabinet form.

Utilizing the Storage Drawer

The large storage drawer is located at the base of the cabinet. It rolls on casters for easy access. This drawer is ideal for storing linens, pillows, or other personal belongings, whether the bed is folded or unfolded.

Údržba

• Čištění: Otřete povrchy měkkým, damp hadříkem. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky, které by mohly poškodit povrchovou úpravu.
• Železářské zboží: Periodically check all screws, bolts, and connections to ensure they remain tight. Re-tighten as needed to maintain stability and safety.
• Stěhování: Při přemisťování postele ji raději zvedejte, než tahejte, abyste předešli poškození rámu a podlahy.

Odstraňování problémů

Bed does not fold or unfold smoothly:

Ensure no obstructions are present in the mechanism. Check that all hardware is properly installed and tightened. Lubricate hinges if necessary with a silicone-based lubricant.

Drawer does not slide easily:

Check for obstructions in the drawer glides. Ensure the casters are clean and free of debris. Verify the drawer is assembled correctly and aligned within its opening.

Nabíjecí stanice nefunguje:

Verify the bed's main power cord is securely plugged into a functional wall outlet. Check the device's charging cable. Test with a different device to rule out device-specific issues.

Postel se zdá nestabilní:

Immediately cease use. Re-check all assembly hardware and ensure every connection is securely tightened. Confirm the bed is placed on a level surface.

Specifikace

Informace o záruce

Polibi products typically come with a limited manufacturer's warranty. For specific details regarding the warranty period and coverage for your Polibi Queen Murphy Chest Bed, please refer to the warranty card included in your packaging or visit the official Polibi webUschovejte si doklad o koupi pro případ reklamace.

Zákaznická podpora

If you have any questions, require assistance with assembly, or encounter any issues with your Polibi Queen Murphy Chest Bed, please do not hesitate to contact Polibi customer support. Contact information can typically be found on the product packaging, the manufacturer's webwebu nebo prostřednictvím svého prodejce.

When contacting support, please have your model number (B0DSL28HHX) and purchase information readily available.