1. Bezpečnostní pokyny
Please read all instructions carefully before assembly and use. Keep this manual for future reference. Failure to follow these instructions may result in injury or damage to the product.
- Před zahájením montáže se ujistěte, že jsou všechny díly přítomny a nepoškozené.
- Postel sestavte na měkkém a čistém povrchu, abyste zabránili poškrábání.
- Během montáže šrouby příliš neutahujte.
- Udržujte děti a domácí zvířata mimo oblast montáže.
- Always use two people for assembly and when operating the hydraulic lift mechanism.
- Do not place hands or fingers near moving parts of the hydraulic system.
- Ensure the mattress is properly seated before operating the hydraulic lift.
2. Obsah balení
The Polibi King Size Upholstered Platform Bed is delivered in multiple packages. Verify that all components listed below are present.
- Headboard (Vertical Stripe Design)
- Boční zábrany rámu postele
- Koncové lišty rámu postele
- Hydraulic Lift Mechanisms (2 sets for King size)
- Bed Slats (12+12 for King size)
- Center Support Beam and Legs
- Sada hardwaru (šrouby, matice, podložky, imbusový klíč)
- Návod k montáži
3. Montážní návod
Assembly requires two adults. Follow the steps carefully. A detailed manual with diagrams is included in your package.
3.1 Vybalení a příprava
- Uvolněte prostor pro montáž.
- Unpack all boxes and lay out components on a soft surface to prevent damage.
- Identifikujte všechny součásti podle seznamu obsahu balení.
3.2 Sestavení rámu
- Attach the side rails to the headboard and footboard using the provided hardware. Ensure all connections are secure but do not fully tighten yet.
- Install the center support beam and its legs. Adjust the leg height to ensure even support.
- For King size beds, two twin-sized platform bases are combined. Assemble each twin base frame separately following the instructions.
Obrázek 1: Rozložené view showing the main components of the King Size Upholstered Platform Bed, including the vertical stripe headboard, hydraulic lift mechanism, and bed slats.
3.3 Hydraulic Lift Mechanism and Slat Installation
- Carefully attach the hydraulic lift mechanisms to the bed frame according to the detailed manual. Pay close attention to the orientation.
- Install the bed slats onto the frame. Ensure they are evenly spaced and securely fastened.
- Jakmile jsou všechny součásti na svém místě, důkladně utáhněte všechny šrouby a matice.
Figure 2: The King Size bed is formed by combining two Twin Size platform bed frames, each with its own headboard and storage system.
4. Operating the Hydraulic Storage System
The bed features a hydraulic lift mechanism for easy access to under-bed storage. Always operate with care.
4.1 Lifting the Bed Frame
- Remove any heavy items from the mattress surface.
- Stand at the foot or side of the bed.
- Firmly grasp the lifting handle or edge of the bed frame.
- With a steady motion, lift the bed frame upwards. The hydraulic pistons will assist in raising and holding the frame in the open position.
- Ensure the frame is fully extended and stable before accessing the storage area.
Figure 3: The innovative hydraulic lift system provides easy access to generous under-bed storage, ideal for stowing bedding, clothes, or seasonal items.
4.2 Lowering the Bed Frame
- Ensure no obstructions are in the storage area that could prevent the frame from closing completely.
- Grasp the lifting handle or edge of the bed frame.
- Gently pull the frame downwards. You may need to apply some downward pressure to overcome the hydraulic resistance.
- Lower the frame slowly and evenly until it rests securely on the bed base.
Figure 4: The hydraulic storage system underneath the mattress is ideal for maximizing room storage potential.
5. Údržba
Regular maintenance helps prolong the life of your bed.
5.1 Čištění
- Čalounictví: For general cleaning, vacuum the fabric regularly using an upholstery attachment. For spills, blot immediately with a clean, dry cloth. For stubborn stains, consult a professional upholstery cleaner or use a mild fabric cleaner suitable for linen, testing on an inconspicuous area first.
- Rám: Rám postele otřete měkkým hadříkem.amp hadříkem. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky.
5.2 Hardware Check
- Pravidelně kontrolujte všechny šrouby a vruty, zda jsou pevně utažené. V případě potřeby je dotáhněte pro zachování stability.
5.3 Hydraulický systém
- Inspect the hydraulic pistons for any signs of leakage or damage. If any issues are observed, contact customer support.
- Do not attempt to lubricate or disassemble the hydraulic pistons yourself.
6. Řešení problémů
V této části naleznete běžné problémy a jejich řešení.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Rám postele se kymácí nebo vrže. | Loose hardware. Uneven floor. | Zkontrolujte a utáhněte všechny šrouby a vruty. Ujistěte se, že postel je na rovném povrchu. |
| Hydraulic lift is difficult to raise or lower. | Too much weight on the mattress. Obstruction in storage. Hydraulic pistons not fully engaged. | Remove excess weight from the mattress. Clear any items obstructing the mechanism. Ensure the mattress is correctly positioned. If issues persist, contact customer support. |
| Bed frame does not close completely. | Items in storage are too tall. | Rearrange or remove items from the storage compartment to allow the frame to close fully. |
7. Specifikace
| Funkce | Detail |
|---|---|
| Velikost | Král |
| Materiál | Engineered Wood, Linen |
| Rozměry produktu (D x Š x V) | 76 cm x 78 cm x 43.3 cm |
| Styl | Moderní |
| Speciální funkce | Hydraulic Lift Mechanism, Under-Bed Storage |
| Kompatibilní velikost matrace | Král |
| Požadovaná montáž | Ano |
| Barva | Šedá |
Figure 5: Overall product dimensions for the King Size bed.
Figure 6: Weight capacity information for Twin (330 lbs) and King (660 lbs) bed sizes.
8. Informace o záruce
For specific warranty details regarding your Polibi King Size Upholstered Platform Bed, please refer to the warranty card included in your package or contact Polibi customer service directly. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase.
9. Zákaznická podpora
If you have any questions, require assistance with assembly, or encounter any issues not covered in this manual, please contact Polibi customer support. Have your product model and purchase date ready when contacting support.
Polibi Customer Service: Please refer to the contact information provided in your product packaging or visit the official Polibi webstránky pro možnosti podpory.