1. Konec produktuview
The WASSERMANN 3WDP4-55-115V is a high-performance self-priming diaphragm water pressure pump designed for various applications. It delivers a flow rate of 4.0 gallons per minute (GPM) with a pressure switch set to 55 PSI. This 115V AC pump is suitable for use in kitchens, bathrooms, marine environments, RVs, and gardens, providing consistent water pressure wherever needed.
Key features include an automatic pressure control switch, a durable pure copper motor, and anti-vibration mounting for quiet operation. The pump is equipped with a 3.5-foot power cord and 1/2-inch outlet diameter for versatile installation.
Image 1.1: WASSERMANN 3WDP4-55-115V Water Pressure Pump with key specifications. Shows voltage (115V AC), amps (0.9A), flow (4 GPM), max suction (10 FT), PSI (55 PSI), max lift (98 FT), and hose adapter details.
2. Bezpečnostní informace
- Před zahájením jakékoli údržby nebo instalace vždy odpojte napájení.
- Ujistěte se, že je čerpadlo instalováno v suchém, dobře větraném prostoru, chráněném před mrazem.
- Do not pump flammable liquids such as gasoline, kerosene, or ethanol. This pump is designed for water only.
- Ověřte, že napájecí zdroj objtage odpovídá požadavkům čerpadla (115 V AC).
- Use appropriate plumbing connections and sealants to prevent leaks.
- The pump is equipped with thermal protection to prevent motor overheating. If the pump stops unexpectedly, allow it to cool before restarting.
Image 2.1: Illustration showing various liquids suitable for the pump (fresh water, drinking water, low salinity liquid, weakly acidic liquid) and a warning against pumping flammable liquids.
3. Instalace a nastavení
3.1 Vybalení a kontrola
Carefully remove the pump and all accessories from the packaging. Inspect for any signs of damage during transit. Ensure all components listed in the packing list are present.
3.2 Montáž čerpadla
Mount the pump on a stable, flat surface using the integrated mounting bracket. The pump features anti-vibration rubber feet to reduce noise and vibration during operation.
Image 3.1: Close-up of the pump's stable rubber feet, designed to minimize vibration on hard surfaces and reduce operational noise.
3.3 Vodovodní připojení
- Instalace sítka: Firmly tighten the 50-mesh stainless steel strainer to the inlet connection of the pump. This prevents debris from entering and damaging the pump.
- Connect Hose Adapters: Install the provided barbed hose adapters to the threaded NPSM ports on the pump.
- Připojení hadic: Securely attach your water supply hose to the inlet adapter and your output hose to the outlet adapter. Ensure all connections are tight to prevent leaks.
Image 3.2: Step-by-step guide for plumbing connections: 1. Tighten the strainer. 2. Install barbed hose adapters. 3. Attach hoses to adapters.
Image 3.3: Diagram showing the 50-mesh stainless steel strainer, which can be removed for cleaning and helps filter out debris from the water supply.
3.4 Elektrické připojení
Plug the 3.5-foot power cord into a standard 115V AC wall socket. Ensure the outlet is properly grounded.
4. Návod k obsluze
The WASSERMANN water pressure pump features an automatic pressure switch for convenient operation.
- Zapnutí: Once installed and connected, plug in the pump.
- Automatický provoz: The pump will automatically activate when a tap or water outlet is opened, supplying water. It will stop when the tap is closed, maintaining stable water pressure and conserving energy.
Image 4.1: Diagram illustrating the on-demand pressure switch, which automatically starts the pump when water flow is detected and stops it when the flow ceases.
4.1 Adjusting Pressure (If Necessary)
The factory default pressure setting is 55 PSI. If adjustment is required:
- Locate the red rubber sleeve in the center of the pressure switch and open it.
- Use a pressure regulator needle (or small screwdriver) to adjust the pressure. Turning clockwise increases pressure, and turning counter-clockwise decreases pressure.
Image 4.2: Visual guide for adjusting the pump's pressure switch. Shows locating the red rubber sleeve and using a tool to turn the adjustment screw.
5. Údržba
5.1 Strainer Cleaning
Regularly inspect and clean the 50-mesh stainless steel strainer located at the pump's inlet. A clogged strainer can reduce pump performance and lead to damage.
- Odpojte napájení čerpadla.
- Unscrew the strainer housing.
- Remove the mesh filter and rinse it thoroughly under clean water.
- Reassemble the strainer, ensuring a tight seal.
5.2 Winterization (for outdoor/RV use)
If the pump is used in an environment where freezing temperatures are possible, it must be drained and winterized to prevent damage.
- Odpojte napájení.
- Drain all water from the pump and associated plumbing.
- Store the pump in a warm, dry location if possible, or ensure it is completely dry before storing in freezing conditions.
5.3 Obecná kontrola
Periodically check all connections for leaks, inspect the power cord for damage, and ensure the pump is securely mounted.
6. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Čerpadlo neběží | No power; tripped circuit breaker; motor overheating; faulty pressure switch. | Check power connection and outlet; reset breaker; allow motor to cool; inspect pressure switch wiring. |
| Nízký průtok/tlak vody | Clogged strainer; air in system; restricted inlet/outlet; low voltage. | Clean strainer; bleed air from system; check hoses for kinks; verify power supply. |
| Čerpadlo běží nepřetržitě | Leak in plumbing; faulty pressure switch; air in system. | Check all connections for leaks; inspect/replace pressure switch; bleed air from system. |
| Nadměrný hluk/vibrace | Loose mounting; air in system; debris in pump. | Securely mount pump; bleed air; clean strainer and inspect pump for foreign objects. |
7. Specifikace
| Funkce | Detail |
|---|---|
| Model | 3WDP4-55-115V |
| Značka | WASSERMANN |
| svtage | 115V AC |
| Ampvymazat | 0.9 Amps |
| Maximální průtok | 4.0 galonů za minutu (GPM) |
| Nastavení tlakového spínače | 55 PSI |
| Maximální sací výška | 10 stop |
| Max Total Lift | 98 stop |
| Průměr vstupu / výstupu | 1/2 palce |
| Délka napájecího kabelu | 3.5 stop |
| Materiál | Copper (motor), Thermoplastic (pump body) |
| Certifikace | CE, ROHS |
Image 7.1: Detailed product dimensions for the WASSERMANN water pressure pump and its components, including the strainer and hose adapters.
8. Záruka a podpora
The WASSERMANN 3WDP4-55-115V Water Pressure Pump comes with a 1letá záruka bez starostí od data nákupu.
For technical assistance, troubleshooting, or warranty claims, please contact WASSERMANN customer support. Refer to your purchase documentation for specific contact details or visit the official WASSERMANN webmísto.