1. Úvod
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT E3 Dual Motor Electric Standing Desk. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Důležité bezpečnostní informace
To prevent injury and ensure optimal performance, please adhere to the following safety guidelines:
- Always ensure the desk is properly assembled and stable before use.
- Nepřekračujte maximální hmotnostní limit 220 lb (100 kg).
- Be cautious when adjusting the desk height to avoid injury from pinching or crushing. Ensure no objects or body parts are in the path of the moving desk.
- Během provozu držte děti a domácí zvířata v dostatečné vzdálenosti od stolu.
- Nesedejte ani nestůjte na stole.
- Používejte pouze dodaný napájecí adaptér a komponenty.
- If any unusual noise or movement occurs, immediately stop operation and unplug the desk.
3. Nastavení a montáž
The FLEXISPOT E3 desk requires assembly. It typically arrives in two separate packages. While the lower frame assembly is straightforward, the desktop may require drilling approximately 20 holes for secure attachment. It is recommended to have two people for assembly due to the weight of the components.
3.1. Obsah balení
Verify that all components are present before beginning assembly. Refer to the included assembly guide for a complete list of parts.
3.2. Montážní kroky
- Vybalte všechny součásti a rozložte je na čistý, měkký povrch, abyste zabránili poškrábání.
- Assemble the desk frame according to the detailed instructions provided in the separate assembly guide.
- Attach the desktop to the assembled frame. Ensure proper alignment before securing with screws. Note that pre-drilled holes may not be present on the desktop, requiring careful drilling.
- Connect the control panel and power cables as instructed.
- Place the desk in its desired location, ensuring it is level and stable.
4. Návod k obsluze
The FLEXISPOT E3 desk features a dual-motor system for smooth and quiet height adjustments, controlled by a programmable panel.
4.1. Ovládací panel Overview
The control panel allows you to raise or lower the desk and save preferred height positions.
- Up/Down Arrows (↑ / ↓): Press and hold to continuously adjust the desk height. Release to stop at the desired level.
- Předvolby paměti (1, 2, 3, 4): These buttons allow you to save and recall up to four custom height settings.
4.2. Nastavení předvoleb paměti
- Nastavte stůl do požadované výšky pomocí šipek nahoru/dolů.
- Press the 'M' or 'Set' button (if available, or follow specific instructions for your panel) followed by one of the number buttons (1, 2, 3, or 4). The display may flash or beep to confirm the setting is saved.
- To recall a saved height, simply press the corresponding number button. The desk will automatically move to that preset height.
4.3. Dual Motor Operation
The E3 desk is equipped with dual motors, providing seamless and silent operation (under 50 dB). This design allows for a higher weight capacity and smoother transitions between sitting and standing positions.
4.4. Hmotnostní kapacita
The desk is engineered to support up to 220 lb (100 kg), providing a sturdy and reliable workstation for various tasks and equipment.
4.5. Protikolizní systém
The desk is equipped with an anti-collision system that detects resistance during height adjustment. If an obstacle is encountered, the desk will automatically stop and reverse slightly to prevent damage or injury.
5. Údržba
Pravidelná údržba zajistí dlouhou životnost a optimální výkon vašeho stolu pro práci ve stoje.
- Čištění: Otřete pracovní plochu a rám měkkým hadříkemamp hadříkem. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky, které by mohly poškodit povrchovou úpravu.
- Správa kabelů: Periodically check and organize cables to prevent tangles and ensure they do not interfere with the desk's movement.
- Spojovací materiál: Občas zkontrolujte všechny šrouby a vruty, zda jsou pevně utažené. V případě potřeby je dotáhněte.
- Kontrola motoru: Ensure the motor and electrical connections are free from dust and debris. Do not attempt to open the motor housing.
6. Řešení problémů
If you encounter issues with your FLEXISPOT E3 desk, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Stůl se nehýbe ani nereaguje na ovládací prvky. | Power cable disconnected, circuit breaker tripped, control panel malfunction. | Check all cable connections. Ensure the power outlet is functional. Try unplugging and replugging the desk after 30 seconds. |
| Stůl se pohybuje nerovnoměrně nebo vydává neobvyklé zvuky. | Uneven load, loose fasteners, obstruction. | Ensure weight is evenly distributed. Check and tighten all assembly fasteners. Remove any obstructions. |
| Error codes displayed (e.g., ASR/E20). | Motor overload, sensor issue, or internal fault. | Unplug the desk for at least 10 minutes, then plug it back in. If the error persists, contact customer support. Avoid exceeding the weight limit. |
| Protikolizní systém se často spouští. | Překážka, citlivé prostředí. | Ensure there are no objects in the desk's path. Refer to the full manual for instructions on adjusting anti-collision sensitivity if available. |
If the problem persists after attempting these solutions, please contact FLEXISPOT customer support for further assistance.
7. Specifikace
| Funkce | Detail |
|---|---|
| Značka | FLEXISPOT |
| Model | E3 |
| Rozměry produktu | 55.1"H x 27.5"Š x 27.6"V |
| Barva | White Frame + White Top |
| Styl | Moderní |
| Základní materiál | Kov |
| Typ horního materiálu | Dřevo |
| Typ dokončení | Dřevo |
| Speciální funkce | Kabelové |
| Povrchová úprava nábytku | Bílý |
| Velikost | 55"x28" Whole-piece |
| Zahrnuté komponenty | Keyboard Tray, Monitor Arm (Note: Components may vary by package) |
| UPC | 840460427586 |
| Item Height (Adjustable Range) | 27.6 inches (Min) to 46.8 inches (Max) |
| Doporučená maximální hmotnost | 220 liber (100 kg) |
| Požadovaná montáž | Ano |
| Typ motoru | Duální motor |
| Úroveň hluku | Pod 50 dB |
8. Záruka a podpora
FLEXISPOT poskytuje komplexní záruční krytí pro váš klid:
- Dvouleté krytí: Applies to the desk frame and motor.
- Dvouleté krytí: Applies to the control panel and other electronics.
For any assistance, warranty claims, or technical support, please contact FLEXISPOT customer service. Refer to your purchase documentation or the official FLEXISPOT webstránky pro kontaktní údaje.