Uživatelská příručka k LCD displeji pro elektrokolo YL81F
Model: YL81F | Brand: Generic
Zavedení
This manual provides detailed instructions for the installation, operation, and maintenance of your YL81F EBike LCD Display Meter. The YL81F display is designed to enhance your electric bicycle riding experience by providing essential information and control functions.
It features a colorful LCD screen offering a wide range of functions including speed display, mileage tracking, battery level indication, and personalized parameter settings. Please read this manual thoroughly before use to ensure proper installation and optimal performance.
Bezpečnostní informace
- Always ensure your e-bike is powered off before installing or removing the display.
- Do not attempt to disassemble or modify the display unit. This may void the warranty and cause damage.
- Chraňte displej před extrémními teplotami, delším přímým slunečním zářením a korozivními látkami.
- Ensure all connections are secure and waterproof (if applicable) to prevent electrical shorts or damage from moisture.
- Regularly check the display's mounting for stability to prevent it from detaching during rides.
- Do not operate the display while riding if it distracts you from safe operation of the e-bike.
Konec produktuview
The YL81F LCD Display Meter consists of the main display unit and a control button panel, designed for handlebar mounting. It provides a clear, colorful interface for monitoring your e-bike's performance.
Image: YL81F EBike LCD Display Meter, showing the main display unit, the handlebar-mounted control button panel, and the connecting cable with its SM connector.
Klíčové komponenty:
- Displej LCD: Colorful interface for data visualization.
- Control Button Panel: Pro navigaci v menu a úpravu nastavení.
- Montážní držák: Flexible bracket for handlebar sizes 22.2 mm, 25.4 mm, and 31.8 mm.
- 5-pin SM Connector Cable: For connecting to the e-bike's controller.
- USB Charging Port (on K6 button): Provides power protection for mobile phones.
Nastavení a instalace
Follow these steps to properly install your YL81F LCD Display Meter on your e-bike.
- Příprava řídítek: Choose a suitable position on your e-bike's handlebar for the display and control panel. Ensure there is enough space and that it does not obstruct your view nebo ovládání kola.
- Montáž displeje: Use the provided mounting bracket to secure the YL81F display unit to the handlebar. The flexible bracket is compatible with handlebar sizes of 22.2 mm, 25.4 mm, and 31.8 mm. Tighten securely but do not overtighten.
- Namontujte ovládací panel: Attach the control button panel to a comfortable and accessible position on the handlebar, typically near your thumb.
- Připojte kabely:
- Locate the 5-pin SM male connector cable from the display unit.
- Connect this cable to the corresponding female connector on your e-bike's controller or wiring harness. Ensure the connection is firm and secure.
- If your e-bike uses a different communication protocol, please contact customer service with your old monitor's serial number to ensure compatibility and a plug-and-play experience.
- Zapnutí a testování: Once all connections are made, power on your e-bike. The display should light up. Verify that all basic functions (e.g., speed, battery level) are displayed correctly.
- Poznámka ke kompatibilitě: The YL81F display is compatible with 24V, 36V, 48V, and 60V e-bike battery systems.
Návod k obsluze
The YL81F display offers a variety of functions accessible through its intuitive interface and control buttons.
Funkce displeje:
- Zobrazení stavu baterie: Zobrazuje aktuální stav nabití baterie vašeho elektrokola.
- Zobrazení rychlosti: Zahrnuje rychlost v reálném čase, maximální rychlost a průměrnou rychlost.
- Zobrazení ujetých kilometrů: Tracks single trip mileage and total mileage.
- Boost Gear Adjustment and Indication: Allows selection and display of assist levels.
- Boost Push Control and Indication: For walk-assist mode.
- Headlight Control and Indication: To turn e-bike lights on/off.
- Zobrazení chybového kódu: Indikuje poruchy systému pomocí specifických kódů.
- Cruise Control and Indication (Optional): If enabled and supported by your e-bike system.
- Nastavení personalizovaných parametrů: Adjust settings such as wheel diameter, speed limit, and other bike parameters.
- Factory Default Parameter Restoration: Option to reset settings to original factory values.
Použití ovládacích tlačítek:
Specific button functions may vary slightly based on firmware version. Generally, buttons are used for:
- Zapnutí/vypnutí: Dlouze stiskněte tlačítko napájení.
- Přepínání režimů: Short press a mode button to cycle through display modes (e.g., Trip, ODO, MAX Speed, AVG Speed).
- Nastavení úrovně podpory: Use '+' and '-' buttons to increase or decrease pedal assist levels.
- Setting Access: Long press specific buttons (refer to on-screen prompts) to enter parameter settings menu.
- USB nabíjení: The K6 button on the display has a USB interface for charging compatible devices.
For detailed navigation and parameter adjustment, refer to the on-screen prompts and specific instructions provided by your e-bike manufacturer if integrated.
Údržba
- Čištění: Otřete displej a kryt měkkým hadříkemamp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
- Kontrola připojení: Pravidelně kontrolujte všechna kabelová připojení, abyste se ujistili, že jsou bezpečná a bez koroze nebo poškození.
- Skladování: Pokud elektrokolo skladujete delší dobu, ujistěte se, že je displej čistý a skladován v suchém, mírném prostředí.
- Vyhněte se dopadu: While the display is constructed with rugged ABS and tempered glass, avoid dropping or subjecting it to strong impacts.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Displej se nezapne. | No power from battery; loose connection; faulty display. | Check e-bike battery charge. Verify all cable connections are secure. If problem persists, contact customer service. |
| Displej zobrazuje chybový kód. | System malfunction detected by the e-bike controller. | Note the error code and consult your e-bike's main manual or contact customer service for specific code meanings and solutions. |
| Speed/Mileage not accurate. | Incorrect wheel diameter setting; faulty speed sensor. | Access personalized parameter settings to verify and adjust the wheel diameter. Check speed sensor connection and function. |
| Display is difficult to read in sunlight. | High glare conditions; display brightness setting. | Adjust display angle if possible. Check if there's a brightness setting in the display's menu. (Note: Some LCDs may have inherent limitations in direct sunlight). |
Pokud narazíte na problémy, které zde nejsou uvedeny, nebo pokud řešení problém nevyřeší, kontaktujte prosím zákaznickou podporu.
Specifikace
| Název modelu | YL81F |
| Značka | Generic (Manufacturer: Yolin) |
| Typ zobrazení | LCD, Colorful Screen |
| Konektivita | Wired, 5-pin SM connector |
| svtage Kompatibilita | 24V, 36V, 48V, 60V |
| Typ montáže | Držák na řídítka |
| Kompatibilita průměru řídítek | 22.2 mm, 25.4 mm, 31.8 mm |
| Materiál | ABS housing, LCD screen, Tempered Glass, Nylon bracket |
| Zahrnuté komponenty | Display Unit, Mounting Bracket |
| Vstup lidského rozhraní | Tlačítka |
| Hmotnost balení | 219 gramů |
| Rozměry balení (D x Š x V) | 4.72 x 3.94 x 3.54 palce |
Záruka a podpora
The YL81F LCD Display Meter comes with a 1 roky záruka výrobce.
For technical support, warranty claims, or inquiries regarding specific communication protocols and customized functions (e.g., cruise control), please contact the online customer service of the seller. When contacting support, it is helpful to provide the serial number located on the back of your old monitor (if replacing) or the product's purchase details.
Ensure you pay attention to messages from the seller after purchase, as they may contact you to confirm compatibility for a plug-and-play experience.
