ATsafepro Digital Tire Inflator with Pressure Gauge User Manual

Zavedení

This manual provides instructions for the ATsafepro Digital Tire Inflator with Pressure Gauge. Please read this manual thoroughly before use to ensure proper operation and safety. This device is designed for accurately measuring and adjusting tire pressure for various vehicles, including bicycles, motorcycles, cars, and trucks.

Konec produktuview

The ATsafepro Digital Tire Inflator combines a precise digital pressure gauge with an inflation and deflation tool. It features a dual chuck compatible with both Presta and Schrader valves, a backlit LCD screen for clear readings, and supports multiple pressure units.

Obrázek 1: ATsafepro Digital Tire Inflator with included accessories, including the main unit, hose, dual chuck, quick-connect fitting, valve caps, ball needle, and cone adapters.

Klíčové vlastnosti:

• Dual Chuck Compatibility: Equipped with a dual chuck that supports both Presta and Schrader valves, eliminating the need for separate adapters.
• Vysoká přesnost: Professionally calibrated to within 1% accuracy with a display resolution of 0.5 PSI.
• Více jednotek měření: Supports four units: PSI, Bar, KPa, and Kgf/cm², with a range from 0 to 200 PSI (14 Bar, 1400 KPa, or 14 Kgf/cm²).
• Podsvícený LCD displej: Features a bright green backlit LCD for easy reading in various lighting conditions.
• Multifunkční design: Functions as a tire pressure gauge, an inflator (when connected to an air compressor), and a deflator via its air bleeder valve.
• Odolná konstrukce: Built with high-quality materials for long-term performance and leak-proof operation.

Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• 1 x ATsafepro Digital Tire Inflator Gauge
• 1 x 1/4" NPT US Standard Quick-Connect Fitting
• 4 x Tire Valve Stem Caps
• 1 x adaptér pro kuličkové jehly
• 2 x Cone Adapters
• 1 x Sealant Tape (for quick-connect fitting)
• 2 x AAA baterie (předinstalované nebo přiložené samostatně)

Nastavení

1. Nainstalujte baterie: If not pre-installed, open the battery compartment and insert 2 AAA batteries, observing polarity.
2. Připojení ke vzduchovému kompresoru:
   • Apply sealant tape to the threads of the 1/4" NPT quick-connect fitting.
   • Screw the quick-connect fitting securely into the base of the inflator handle.
   • Connect the quick-connect fitting to your air compressor hose. Ensure a secure, leak-free connection.
3. Zapnutí: Press the "ON" button to power on the digital gauge. The LCD screen will illuminate.
4. Vyberte jednotku tlaku: Press the "UNIT" button repeatedly to cycle through the available pressure units (PSI, Bar, KPa, Kgf/cm²) until your desired unit is displayed.

Obrázek 2: The digital display showing different pressure units (PSI, Bar, KPa, Kgf/cm²) and the "UNIT" button for selection.

Návod k obsluze

1. Checking Tire Pressure:

1. Ensure the inflator is powered on and the correct pressure unit is selected.
2. Sejměte krytku ventilku z pneumatiky.
3. Press the dual chuck firmly onto the tire valve stem. For Schrader valves, push straight on. For Presta valves, ensure the Presta side of the chuck is used. The gauge will display the current tire pressure.
4. Read the pressure displayed on the LCD screen.
5. Remove the chuck from the valve stem and replace the valve cap.

Obrázek 3: The dual chuck head, clearly labeled for both Schrader and Presta valve types, allowing direct connection without conversion.

2. Inflating Tires:

1. Follow steps 1-3 from "Checking Tire Pressure" to attach the inflator to the tire valve.
2. Ensure your air compressor is turned on and supplying air.
3. Press and hold the trigger on the inflator handle to begin inflation. The digital gauge will show the pressure increasing in real-time.
4. Release the trigger once the desired pressure is reached.
5. Remove the chuck from the valve stem and replace the valve cap.

Obrázek 4: The ATsafepro inflator connected to a car tire valve, demonstrating its use for vehicle tire inflation.

3. Deflating Tires:

1. Attach the inflator to the tire valve as described in "Checking Tire Pressure". The current pressure will be displayed.
2. Press the air bleeder valve (small button or lever near the chuck) to release air from the tire.
3. Monitor the digital display until the desired lower pressure is achieved.
4. Release the air bleeder valve, then remove the chuck and replace the valve cap.

4. Using Lock-On Feature (for Presta/Schrader):

The chuck features a lever to secure it onto the valve stem for hands-free operation during inflation.

1. Push the chuck onto the valve stem.
2. Push the lever down to lock the chuck onto the valve stem.
3. To unlock, pull the lever up.

Obrázek 5: Top image shows the chuck unlocked and being placed on a bicycle tire valve. Bottom image shows the chuck locked onto the valve, securing the connection for inflation.

Údržba

• Čištění: Otřete zařízení měkkým, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani neponořujte jednotku do vody.
• Skladování: Skladujte hustilku na suchém a chladném místě mimo dosah přímého slunečního záření a extrémních teplot.
• Výměna baterie: Replace batteries when the low battery indicator appears on the LCD screen. Ensure proper battery disposal.
• Kontrola hadice a upínacího sklíčidla: Regularly inspect the hose and chuck for any signs of wear, cracks, or damage. Replace if necessary to maintain air-tight seals.

Odstraňování problémů

Specifikace

Záruka a podpora

ATsafepro products are designed for reliability and performance. For warranty information, technical support, or assistance with your product, please refer to the contact information provided with your purchase or visit the official ATsafepro webmísto.

For further assistance, you may contact ATsafepro customer service through their official channels. Please have your model number (B0DR8DMY7C) and purchase date available when contacting support.