Teglu Paraffin Wax Machine 4L User Manual

1. Úvod

Thank you for choosing the Teglu Paraffin Wax Machine. This device is designed to provide a soothing and moisturizing paraffin wax treatment for your hands and feet in the comfort of your home. Please read this manual thoroughly before initial use to ensure safe and effective operation. Keep this manual for future reference.

2. Důležité bezpečnostní pokyny

VAROVÁNÍ: Abyste snížili riziko popálení, úrazu elektrickým proudem, požáru nebo zranění osob:

• Před použitím spotřebiče si přečtěte všechny pokyny.
• Do not operate if the cord or plug is damaged. If it is not working properly, has been dropped or damaged, or dropped into water, return it to a service center.
• Udržujte kabel mimo horké povrchy.
• Neponořujte spotřebič do vody nebo jiných kapalin.
• Nesahejte po zařízení, které spadlo do vody. Okamžitě jej odpojte.
• Nikdy neupouštějte ani nevkládejte žádné předměty do žádného otvoru.
• Nepoužívejte venku nebo nepracujte tam, kde se používají aerosolové (sprejové) produkty nebo kde je podáván kyslík.
• Always test the wax temperature on your wrist before immersing hands or feet to prevent burns.
• Pečlivý dohled je nutný, pokud tento spotřebič používají děti nebo osoby s určitým postižením, na nich nebo v jejich blízkosti.
• Unplug this appliance from the outlet when not in use, before putting on or taking off parts, and before cleaning.
• Používejte tento spotřebič pouze k účelu, ke kterému je určen, jak je popsáno v tomto návodu.

3. Obsah balení

Ověřte, zda jsou v balení obsaženy všechny níže uvedené položky:

• 1 x Teglu Paraffin Wax Machine (4000 ml capacity)
• 1 x Návod k obsluze (tento dokument)
• 2 x Thermal Hand Gloves
• 1 x Heat Insulation Grid
• 1 x silikonový štětec
• 3 x 450g Lavender Paraffin Wax Blocks
• 100 x Plastic Hand Gloves
• 100 x Plastic Foot Gloves

Image: Contents of the Teglu Paraffin Wax Machine package, including the machine, wax blocks, thermal gloves, plastic gloves, silicone brush, and heat insulation grid.

4. Vlastnosti produktu

• Quick Heating & Melting: The aluminum liner facilitates melting of 3x 450g paraffin wax blocks in approximately 40 minutes.
• Velká kapacita: A 4-liter inner tank (32x17cm / 12.6x6.7 inches) accommodates hands, feet, and elbows comfortably.
• Touchable Screen with Temperature/Time Display: Umožňuje přesnou regulaci teploty od 30 °C do 70 °C.
• Ochrana proti přehřátí: The machine automatically stops heating and maintains a constant temperature if it exceeds 70°C.

Image: Illustration of the machine's fast heating capability, highlighting the aluminum liner and 45-minute melting time.

Image: Close-up of the machine's touchable screen interface, showing temperature and time adjustment controls.

Image: A person's feet immersed in the melted paraffin wax, demonstrating the large 4L capacity of the machine.

5. Pokyny k nastavení

1. Umístění: Place the paraffin wax machine on a stable, flat, and heat-resistant surface. Ensure there is adequate ventilation around the unit.
2. Vložte vosk: Open the lid and place the included paraffin wax blocks into the aluminum liner. It is recommended to use at least 3 blocks (1350g) for optimal depth.
3. Zavřít víko: Securely close the lid to help retain heat during the melting process.
4. Připojte napájení: Zapojte napájecí kabel do vhodné elektrické zásuvky.

Image: A visual sequence demonstrating the process of adding wax, melting, testing temperature, dipping hands, and removing wax.

6. Návod k obsluze

6.1 Melting the Wax

1. Zapnutí: Press the power button on the touchable screen to turn on the machine.
2. Set Melting Temperature: Use the temperature controls (usually '+' and '-') to set the desired melting temperature. For initial melting, a setting between 60-70°C (140-158°F) is recommended. The display will show the current temperature.
3. Počkejte na roztavení: Allow approximately 40 minutes for 3x 450g wax blocks to fully melt. The indicator light will change or the display will show a stable temperature once melted.
4. Set Treatment Temperature: Once the wax is fully melted, lower the temperature to a comfortable and safe treatment range, typically between 50-55°C (122-131°F).
5. Testovací teplota: Before applying, always test a small amount of wax on your inner wrist to ensure it is not too hot. The wax should feel warm and comfortable, not burning.

6.2 Applying the Wax Treatment

1. Příprava pokožky: Ensure your hands or feet are clean and dry. Remove any jewelry.
2. Dip: Slowly and gently dip your hand or foot into the melted paraffin wax. Immediately remove it, allowing the wax to dry slightly (a few seconds).
3. Opakovat: Repeat the dipping process 3-5 times to build up several layers of wax.
4. Pokrýt: Immediately after the final dip, place a plastic glove (or bag) over the waxed hand or foot.
5. Izolovat: For enhanced heat retention, place a thermal glove or mitt over the plastic-covered hand or foot.
6. Relaxovat: Allow the wax to remain on for 10-15 minutes. This allows the heat to penetrate and moisturize the skin.
7. Odstranit: Remove the thermal glove and plastic glove. The wax should peel off easily with the plastic glove. Discard the used wax.
8. Zvlhčovat: Gently massage any residual moisture into your skin.

Image: Visual representation of the skin-softening benefits of paraffin wax treatment on hands, soles, feet, and elbows.

7. Údržba

1. Vypnutí a odpojení: Always turn off the machine and unplug it from the power outlet before cleaning or performing any maintenance.
2. Ochladit: Allow the machine and any remaining wax to cool completely before handling.
3. Remove Solidified Wax: Once the wax has solidified and cooled, it can typically be lifted out as a single block. If necessary, gently use a non-abrasive spatula to assist.
4. Čistý interiér: Wipe the interior of the wax tank with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky, rozpouštědla ani agresivní chemikálie, protože by mohly poškodit povrch.
5. Čistý exteriér: Otřete vnější povrch stroje měkkým, suchým hadříkem.
6. Skladování: Store the machine in a cool, dry place, away from direct sunlight and moisture.
7. Neponořujte: Never immerse the entire unit in water or any other liquid.

8. Řešení problémů

9. Specifikace

10. Záruka a podpora

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. You may also visit the official Teglu webstránky pro další pomoc.

Teglu Store Link: Visit the Teglu Store on Amazon