KUNPHY BCM-187

KUNPHY Ultrasonic Jewelry Cleaner BCM-187

Návod k použití

1. Úvod

This manual provides essential information for the safe and effective use of your KUNPHY Ultrasonic Jewelry Cleaner, model BCM-187. This device utilizes ultrasonic waves to clean various items such as jewelry, eyeglasses, and small accessories, offering a thorough cleaning process.

KUNPHY Ultrasonic Jewelry Cleaner in black, with a ring and necklace being cleaned in water.
The KUNPHY Ultrasonic Jewelry Cleaner, designed for effective cleaning of various items.

2. Bezpečnostní informace

Please read all safety instructions before operating the device to prevent injury or damage.

  • Neponořujte hlavní jednotku do vody nebo jiných kapalin.
  • Ujistěte se, že napájecí kabel není poškozený a je správně připojen k vhodné zásuvce.
  • Udržujte zařízení mimo dosah dětí.
  • Neprovozujte vysavač bez vody v nádrži.
  • Avoid cleaning items that are sensitive to ultrasonic vibrations, such as certain types of pearls, emeralds, or glued items. Consult a jeweler if unsure.
  • Pokud zařízení nepoužíváte a před čištěním, odpojte jej ze zásuvky.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

  • KUNPHY Ultrasonic Jewelry Cleaner (BCM-187)

4. Konec produktuview

The KUNPHY Ultrasonic Jewelry Cleaner features a compact design with a stainless steel cleaning tank and a simple one-touch operation button. It is equipped with a transparent lid to observe the cleaning process.

KUNPHY Ultrasonic Jewelry Cleaner next to a handbag, showing its compact dimensions: 8.66 inches long, 3.74 inches wide, and 2.44 inches high.
The compact and portable design of the KUNPHY Ultrasonic Jewelry Cleaner, with dimensions indicated.

5. Nastavení a provoz

Follow these steps for initial setup and to operate your ultrasonic cleaner:

  1. Naplňte nádrž: Open the lid and pour tap water into the stainless steel tank. Do not exceed the maximum water level indicator.
  2. Umístěte položky: Carefully place the items you wish to clean into the water. Ensure items are fully submerged but not overcrowded.
  3. Přidejte čisticí roztok (volitelné): For enhanced cleaning results, add a few drops of liquid dish soap or a specialized KUNPHY cleaning solution to the water.
  4. Začněte s čištěním: Close the lid and press the one-touch ON/OFF button. The indicator light will illuminate, and the cleaning cycle will begin. The device operates with a 3-minute cleaning cycle.
  5. Dokončovací čištění: Once the cycle is complete, the device will automatically stop. Open the lid, carefully remove your items, and rinse them under clean water. Dry with a soft cloth.
Four-step visual guide showing how to use the KUNPHY Ultrasonic Jewelry Cleaner: 1. Pour water, 2. Place item, 3. Add cleaning solution, 4. Press ON/OFF button.
Step-by-step guide for operating the KUNPHY Ultrasonic Jewelry Cleaner.

Items Suitable for Cleaning:

  • Jewelry (rings, necklaces, earrings, bracelets)
  • Brýle a sluneční brýle
  • Watch coins (waterproof watches only)
  • Dentures and retainers
  • Small metal items
Collage of various items being cleaned by the ultrasonic cleaner, including earrings, glasses, a nose ring, a necklace, rings, and a belly button ring.
Examples of items that can be cleaned using the KUNPHY Ultrasonic Jewelry Cleaner.

Výkon čištění:

The cleaner operates at 46KHz, providing 360-degree deep cleaning. The process is designed to be gentle yet effective, removing dirt and grime from hard-to-reach areas without causing damage.

Image illustrating the 46000Hz ultrasonic cleaning process with before and after images of eyeglasses, showing significant cleaning.
Illustration of the 46000Hz ultrasonic cleaning frequency and its effectiveness on eyeglasses.

6. Údržba

Proper maintenance ensures the longevity and optimal performance of your cleaner.

  • Po každém použití: Unplug the device. Empty the water from the tank and wipe the interior with a soft, dry cloth.
  • Čištění exteriéru: Otřete vnější část jednotky měkkým, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani neponořujte jednotku do vody.
  • Skladování: Pokud čistič nepoužíváte, skladujte jej na chladném a suchém místě.

7. Řešení problémů

If you encounter issues with your KUNPHY Ultrasonic Jewelry Cleaner, refer to the following common problems and solutions:

ProblémMožná příčinaŘešení
Zařízení se nezapne.Žádné napájení.Ujistěte se, že je napájecí kabel bezpečně zapojený do zařízení i do funkční elektrické zásuvky.
Čisticí výkon je špatný.Insufficient water or no cleaning solution.Ensure the tank is filled to the appropriate level. Consider adding a few drops of liquid dish soap or KUNPHY cleaning solution.
Red indicator light is flashing.Aktivována ochrana proti přehřátí.Unplug the device and allow it to cool down for a few minutes before attempting to use it again.

8. Specifikace

  • Model: BCM-187
  • Kapacita nádrže: 12 oz (350 ml)
  • Ultrazvuková frekvence: 46 kHz
  • Cyklus čištění: 3 minutes (one-touch operation)
  • Rozměry produktu: 7 x 3 x 3 palce
  • Hmotnost: 1.1 libry
  • Materiál nádrže: Nerezová ocel SUS 304
  • Hladina hluku: Less than 45dB (low-noise design)
Image showing the KUNPHY Ultrasonic Jewelry Cleaner with a graphic indicating a low noise level of less than 45dB, comparing it to other common sounds.
The low-noise design of the KUNPHY Ultrasonic Jewelry Cleaner, operating at less than 45dB.

9. Záruka a podpora

KUNPHY provides a Záruka 12 měsíců for this product. For any questions or support needs, please contact KUNPHY customer service.

To contact support, navigate to your Amazon account:

  1. Přejít na Účet.
  2. Vybrat Objednávky.
  3. Find your order for the KUNPHY Ultrasonic Jewelry Cleaner and click on Detail objednávky.
  4. Locate the 'Sold by: KUNPHY' section and click položit otázku.

© 2023 KUNPHY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.