URintells Cuising Espresso Machine with Grinder

1. Konec produktuview

The URintells Cuising Espresso Machine with Grinder, Model EM7110-US, is designed to provide a complete coffee brewing experience at home. This all-in-one machine features an integrated conical burr grinder, a 58mm portafilter, and a powerful steam wand for milk frothing. Its intuitive controls and robust construction ensure consistent, high-quality espresso and milk-based beverages.

Obrázek 1.1: The URintells Cuising Espresso Machine with Grinder, Model EM7110-US, showcasing its sleek stainless steel design and integrated components.

Obrázek 1.2: The espresso machine with its dimensions: 12.6 inches deep, 13.19 inches wide, and 16.14 inches high, illustrating its compact design for various spaces.

2. Bezpečnostní informace

Před použitím spotřebiče si pečlivě přečtěte všechny bezpečnostní pokyny. Uschovejte si tento návod pro budoucí použití.

• Ensure the machine is placed on a stable, level surface away from heat sources and water.
• Neponořujte spotřebič, napájecí kabel ani zástrčku do vody ani jiných kapalin.
• Před čištěním nebo pokud stroj nepoužíváte, odpojte jej ze zásuvky.
• Během provozu udržujte děti a domácí zvířata mimo dosah spotřebiče.
• Používejte pouze příslušenství a nástavce doporučené výrobcem.
• Nepoužívejte stroj, pokud je poškozený napájecí kabel nebo zástrčka.
• Při manipulaci s horkými povrchy a párou buďte opatrní.

3. Nastavení

3.1 Vybalení a počáteční čištění

Carefully remove all packaging materials. Inspect the machine for any damage. Before first use, it is essential to clean all removable parts that will come into contact with coffee or water.

1. Remove Yellow Cap: Locate and remove the yellow protective cap from the bottom of the water tank or pump mechanism. This cap is for shipping protection only.
2. Mycí komponenty: Wash the water tank, portafilter, filter baskets, drip tray, and bean hopper with warm, soapy water. Rinse thoroughly and dry completely.
3. Otřete stroj: Otřete vnější část stroje reklamouamp tkanina.

Obrázek 3.1: Visual guide for initial setup, including removing the yellow cap, washing parts, and starting the initial program.

3.2 První použití a příprava

After cleaning, the machine needs to be primed to ensure proper water flow.

1. Naplňte nádrž na vodu: Fill the water tank with fresh, cold water up to the MAX line. Ensure the tank is securely placed in the machine.
2. Zapnutí: Plug the machine into a grounded power outlet. Press the ON/OFF button. The machine will perform an initial startup program.
3. Run Water Cycle: Place a large container under the portafilter head and steam wand. Press any brew button (e.g., Single Shot or Double Shot) to run a cycle without coffee. This flushes the system and primes the pump. Repeat this process for the steam wand by activating the steam function to release water until steam appears.

4. Návod k obsluze

4.1 Mletí kávových zrn

The integrated conical burr grinder offers 15 precise settings to achieve the ideal grind size for your espresso.

Obrázek 4.1: The 15-level conical burr grinder, showing settings from coarse (15) to fine (1) for optimal coffee extraction.

1. Naplnění zásobníku na zrna: Add fresh, whole coffee beans to the bean hopper.
2. Vyberte velikost mletí: Adjust the grind size dial. For espresso, a setting between 3 a 5 is generally recommended. Experiment to find your preferred setting.
3. Mletá káva: Place the portafilter under the grinder outlet. Press the portafilter against the grinding button to start grinding. The machine will dispense the set amount of ground coffee.

4.2 Příprava espressa

Achieve a rich and full-bodied espresso with the 58mm extraction system and 15-bar ULKA pump.

Obrázek 4.2: Step-by-step guide for brewing espresso, from preheating to extraction.

1. Vložte filtrační koš: Place the appropriate filter basket (single or double shot) into the portafilter.
2. Dávka a Tamp: Fill the filter basket with 14-16g of ground coffee for a single espresso or 20-22g for a double espresso. Tamp the coffee evenly and firmly using the provided tampehm.
3. Připojení portafiltru: Securely attach the portafilter to the group head by inserting it and rotating it to the right until it locks into place.
4. Pohár umístění: Umístěte šálek/šálek espressa na odkapávací misku přímo pod výpustné trysky portafiltru.
5. Vyberte si nápoj: Stiskněte tlačítko Jediný výstřel or Dvojitý výstřel button. The machine will pre-infuse the coffee before beginning extraction.
6. Zastavit extrakci: The machine will automatically stop the extraction based on programmed volume. You can manually stop it at any time by pressing the brew button again.

Obrázek 4.3: Espresso being extracted, demonstrating the 15-bar ULKA pump for optimal pressure.

Obrázek 4.4: Close-up of the 58mm extraction system, ensuring even saturation of coffee grounds.

4.3 Napěňování mléka

The professional steam wand allows you to create creamy microfoam for lattes and cappuccinos.

1. Připravte mléko: Naplňte nerezovou pěnicí konvici studeným mlékem (mléčným nebo rostlinným) těsně pod výpust.
2. Aktivovat Steam: Stiskněte tlačítko Pára button. Wait for the steam indicator light to illuminate, indicating the machine has reached steaming temperature.
3. Proplachovací parní tryska: Umístěte parní trysku nad odkapávací misku a krátce otevřete knoflík páry, abyste uvolnili kondenzovanou vodu. Zavřete knoflík.
4. Napěněné mléko: Immerse the tip of the steam wand just below the surface of the milk. Open the steam knob fully. Angle the pitcher to create a swirling motion. For microfoam, keep the tip near the surface to incorporate air. For hotter milk, immerse the tip deeper.
5. Zastavte napařování: Once the desired temperature and texture are achieved, close the steam knob and remove the pitcher.
6. Čištění parní trysky: Okamžitě otřete parní trysku čističemamp hadříkem odstraňte zbytky mléka. Znovu krátce otevřete knoflík páry, abyste z trysky vypustili mléko.

Obrázek 4.5: The professional steam wand in action, creating frothed milk for various coffee beverages.

4.4 Control Panel and Settings

The machine features an intuitive LCD display and easy-to-use buttons and dial for various functions.

Obrázek 4.6: The LCD display and control buttons, allowing customization of grind, shot volume, and other settings.

• Tlačítko ON/OFF: Zapíná nebo vypíná stroj.
• Tlačítko START/STOP: Zahájí nebo zastaví proces vaření.
• SET Knob: Used to navigate menus and adjust settings displayed on the LCD.
• Single/Double Espresso Buttons: Initiates a single or double shot espresso brew.
• Tlačítko Steam: Aktivuje funkci páry pro napěňování mléka.
• Hot Water Button: Dávkuje horkou vodu.
• DESCALE Indicator: Illuminates when descaling is required.

4.5 Adjusting Brewing Temperature and Descale Reminder

You can customize the brewing temperature and set the descaling reminder frequency.

Obrázek 4.7: Instructions for setting brewing temperature (Low, Medium, High) and descale reminder (500, 1000, 1500 cups).

• Teplota vaření: With the machine off, press and hold the START/STOP a Single Cup buttons for 2 seconds to enter temperature setting mode. Use the SOUBOR knob to select Low (149°F), Medium (158°F), or High (167°F).
• Descale Reminder: With the machine off, press and hold the START/STOP a Dvojitý pohár buttons for 2 seconds to enter descale reminder setting mode. Use the SOUBOR knob to select 500, 1000, or 1500 cups.

5. Údržba

Pravidelné čištění a údržba zajistí optimální výkon a dlouhou životnost vašeho espresso kávovaru.

5.1 Denní čištění

Obrázek 5.1: Visual guide for daily cleaning of the portafilter, drip tray, bean hopper, and steam wand tip.

• Portafiltr a filtrační koše: After each use, remove the portafilter and discard the spent coffee grounds. Rinse the portafilter and filter basket under hot water.
• Parní tryska: As described in Section 4.3, clean the steam wand immediately after frothing milk.
• Odkapávač: Empty and clean the drip tray daily or when the 'Empty Me' indicator appears.
• Vedoucí skupiny: Použijte reklamuamp cloth to wipe the group head screen and gasket to remove any coffee residue.

5.2 Odvápnění

Descaling removes mineral buildup from the machine's internal components, which is crucial for performance and taste. The machine has a descaling reminder system.

Obrázek 5.2: Step-by-step instructions for the descaling process, including adding descaling agent, running cycles, and refilling the water tank.

1. Příprava roztoku pro odvápňování: Mix a descaling agent with water according to the descaler manufacturer's instructions. Pour the solution into the water tank.
2. Enter Descale Mode: Když ODVÁPNĚNÍ indicator lights up, rotate the SOUBOR knob to the 'CLEAN' mode.
3. Start First Stage: Stiskněte tlačítko START/STOP button to begin the first descaling stage. The machine will run the solution through its system.
4. Vyprázdnit a znovu naplnit: Once the first stage is complete, discard the remaining solution from the water tank and rinse the tank thoroughly. Refill the water tank with fresh, clean water.
5. Start Second Stage: Stiskněte tlačítko START/STOP button again to begin the second stage, which rinses the machine with clean water.
6. Dokončení: Po druhé stage, the descaling process is complete, and the machine will return to standby mode.

6. Řešení problémů

Tato část se zabývá běžnými problémy, se kterými se můžete setkat při používání espresso kávovaru.

If you encounter an issue not listed here or if the suggested solutions do not resolve the problem, please contact URintells Cuising customer support.

7. Specifikace

8. Záruka a podpora

8.1 Záruka na produkt

Please refer to the product packaging or the official URintells Cuising website for specific warranty terms and conditions. Typically, products are covered against manufacturing defects for a defined period from the date of purchase.

8.2 Plány rozšířené ochrany

Extended protection plans may be available for purchase to provide additional coverage beyond the standard manufacturer's warranty. These plans offer peace of mind for a longer duration.

• Dvouletý ochranný plán: K dispozici za 48.99 USD (jednorázová platba).
• Dvouletý ochranný plán: K dispozici za 63.99 USD (jednorázová platba).
• Kompletní ochrana: A monthly plan at $16.99/month, covering eligible past and future purchases.

Podrobnosti o nákupuasing or activating these plans, please consult your retailer or the plan provider.

8.3 Zákaznická podpora

For technical assistance, troubleshooting, or warranty claims, please contact URintells Cuising customer support through their official website or the contact information provided with your purchase. When contacting support, please have your model number (EM7110-US) and proof of purchase readily available.