Velieta Commercial Slushie Machine 12L

Zavedení

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Velieta 12L Commercial Slushie Machine. Please read this manual thoroughly before initial use and retain it for future reference. This machine is designed for commercial use to prepare various frozen beverages such as slushies, margaritas, smoothies, and milkshakes.

Image: The Velieta 12L Commercial Slushie Machine, a stainless steel unit with a clear 12-liter beverage tank.

Bezpečnostní pokyny

• Vždy se ujistěte, že je stroj umístěn na stabilním a rovném povrchu.
• Do not operate the machine with wet hands or near water to prevent electrical shock.
• Ujistěte se, že napájecí kabel není poškozený a je správně zapojený do uzemněné zásuvky.
• Během provozu udržujte děti a neoprávněné osoby v bezpečné vzdálenosti od stroje.
• Před čištěním, údržbou nebo pokud nebudete stroj delší dobu používat, odpojte jej ze zásuvky.
• Důležité: There must be at least 13% sugar content in the liquid to avoid damage to the ice scraper blade.
• Důležité: Never turn the machine on without product in the bowl or with only water in the bowl. This can cause damage to the unit.
• Důležité: Ensure the bowl gasket is correctly positioned and sealed tightly before operation to prevent leaks.

Image: A diagram highlighting critical precautions: minimum 13% sugar content, never run empty or with only water, and ensure the gasket is sealed.

Komponenty produktu

Familiarize yourself with the main components of your slushie machine:

• 12L Vessel: Transparent tank for holding and freezing beverages.
• Interior White LED Light: Illuminates the beverage tank.
• Self-serve Handle: Dispenses the frozen beverage.
• Tělo z nerezové oceli: Durable and hygienic exterior.
• Nalévací hrdlo: Outlet for dispensing drinks.
• Větrací otvory: Essential for proper cooling and ventilation.
• Odnímatelná odkapávací miska: Sbírá rozlité tekutiny pro snadné čištění.
• Stable Feet: Zajišťuje stabilitu jednotky.
• Ovládací panel: Located on the side, contains power, freeze/refrigeration, light, and gear motor switches.

Obrázek: Podrobný view of the slushie machine with key components labeled, including the 12L vessel, self-serve handle, pour spout, air vents, detachable drip tray, stable feet, and interior LED light. Dimensions are also shown: 30.3 inches height, 8.6 inches width, 19.3 inches depth, and a weight of 61.7 lbs.

Image: An exploded diagram showing the internal and external parts of the slushie machine, including the interior LED light, spiral blade, bowl gasket, evaporator, self-serve handle, pour spout, air vents, detachable drip tray, stable feet, and stainless steel body.

Nastavení

1. Rozbalení: Carefully remove the machine from its packaging. Inspect for any damage incurred during shipping.
2. Umístění: Position the machine on a sturdy, level surface with adequate ventilation around the air vents. Ensure there is enough space for air circulation.
3. Počáteční čištění: Before first use, wash all parts that will come into contact with food. Refer to the "Maintenance and Cleaning" section for detailed instructions.
4. Nechte usadit: After transportation, allow the machine to sit upright for at least 2 hodin before powering it on. This allows the compressor fluids to settle.
5. Připojení napájení: Zapojte napájecí kabel do vhodné uzemněné elektrické zásuvky.
6. Kontrola těsnění: Verify that the bowl gasket is properly installed and forms a tight seal.

Image: A visual guide showing the steps: Pour liquid, Select item, Wait for slush. A note emphasizes allowing the machine to sit upright for at least 2 hours before powering on and washing all food-contact parts.

Návod k obsluze

Konec ovládacího paneluview

The control panel on the side of the machine features several switches:

• Hlavní vypínač: Turns the entire machine ON/OFF.
• Main Freeze/Refrigeration Switch: Controls the primary freezing or refrigeration function for the bowl.
• Bowls Upper Agitator Switch: Activates the agitator to stir the liquid.
• Světelný spínač: Turns the interior LED light ON/OFF.
• Individual Bowl Freeze/Refrigeration Switch: Allows independent control of freezing or refrigeration for each bowl (if applicable for multi-bowl models). For this 12L single-bowl model, this switch controls the single bowl.
• Gear Motor Switch: Engages the motor for the spiral blade to create slush.

Image: A diagram illustrating the control panel with labels for the main power switch, main freeze/refrigeration switch, bowls upper agitator switch, light switch, individual bowl freeze/refrigeration switch, and gear motor switch.

Making a Slush

1. Příprava směsi: Mix your desired liquid concentrate or powder with water in a separate container. Ensure the sugar content is at least 13% to prevent damage to the machine. Do not dilute further if using a premixed product.
2. Nalijte kapalinu: Pour the prepared liquid into the 12L vessel. Do not exceed the 'MAX' fill line. Ensure the liquid level does not go below the 'MIN' line (keep at least 1 inch above the cylinder at all times) during operation.
3. Zapnutí: Zapněte hlavní vypínač.
4. Vyberte program: Turn on the Main Freeze/Refrigeration Switch and the Gear Motor Switch to begin the freezing process. You may also turn on the Light Switch for illumination.
5. Wait for Slush: Allow 20-45 minutes for the liquid to reach the desired slush consistency. The machine will continuously rotate the mixture to ensure a smooth texture.
6. Sloužit: Once the slush is ready, pull the self-serve handle to dispense.

Image: A four-panel graphic showing the process: 1. Mix product in a separate container. 2. Pour product into the bowl (observing MAX/MIN lines). 3. Turn on the switch and select the program. 4. Wait 20-45 minutes to enjoy your slush.

Adjusting Slush Consistency

The machine allows for adjustment of slush consistency. A screw mechanism is typically located on the side of the bowl near the dispensing area.

• Turning towards "-" will result in a softer slush.
• Turning towards "+" will result in a harder slush.

The machine is factory-adjusted for normal fruit granulates. For products containing milk or other ingredients that may take longer to freeze, adjust towards the "+" setting for a firmer consistency.

Image: A close-up of the slushie machine showing a screwdriver adjusting a consistency screw. Labels indicate "-" for soft and "+" for hard slush. Text explains that the machine is pre-adjusted for fruit granulates and suggests adjusting to "+" for milk-based or slower-freezing products.

Funkce Keep Cool

This machine features a "Keep Cool" function. After the slush is frozen, the machine can maintain the frozen state without continuous freezing, reducing energy consumption and wear. Refer to the control panel for the specific switch or setting for this function.

Údržba a čištění

Regular cleaning and maintenance are crucial for the longevity and hygienic operation of your slushie machine.

Denní úklid

1. Vyprázdnit a opláchnout: At the end of each day, empty any remaining product from the bowl. Rinse the bowl thoroughly with warm water.
2. Rozebrat: Carefully disassemble the dispensing handle, spiral blade, and any other removable parts from the bowl.
3. Mytí dílů: Wash all disassembled parts with warm, soapy water. Many parts are dishwasher safe, but hand washing is recommended for delicate components. Rinse thoroughly.
4. Čistá mísa: Clean the interior and exterior of the 12L vessel with a soft cloth and mild detergent. Rinse and wipe dry.
5. Otřete exteriér: Wipe down the stainless steel body and control panel with a damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani neponořujte hlavní jednotku do vody.
6. Vysušte a znovu sestavte: Ensure all parts are completely dry before reassembling. Proper reassembly, especially of the gasket, is vital to prevent leaks.

Automatic Clean Function

Your Velieta slushie machine is equipped with an "Automatic Clean" function. Consult your machine's specific instructions for activating this feature. Typically, this involves filling the bowl with clean water and a small amount of food-grade sanitizer, then running the cleaning cycle.

Odstraňování problémů

Specifikace

Informace o záruce

The Velieta Commercial Slushie Machine (Model VTXRJ12L1T-2) comes with a Záruka 12 měsíců from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please contact Velieta customer support.

Zákaznická podpora

For any questions, assistance, or technical support regarding your Velieta Commercial Slushie Machine, please contact our professional support service team.

• E-mail podpory: support@velieta.com
• Telefon podpory: (213) 432-5433
• We offer round-the-clock assistance to ensure risk-free operation.

Image: A group of customer service representatives wearing headsets, symbolizing the Velieta Professional Support Service Team ready to assist customers.