TOOLCY RM
TOOLCY 3200 PSI Gas Pressure Washer User Manual
Model: RM
Zavedení
This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your TOOLCY 3200 PSI Gas Pressure Washer. Please read this manual thoroughly before operating the unit to ensure proper use and to prevent injury or damage.

Image: The TOOLCY 3200 PSI Gas Pressure Washer, showcasinjeho robustní design a klíčové vlastnosti.
Bezpečnostní informace
Always observe safety precautions when operating the pressure washer. Failure to do so may result in serious injury or property damage.
- Přečtěte si manuál: Před použitím se seznamte se všemi provozními pokyny a varováními.
- Ochrana očí: Vždy používejte ochranné brýle nebo ochranné brýle schválené dle ANSI Z87.1.
- Ochrana sluchu: Během provozu používejte ochranu sluchu, abyste předešli poškození sluchu.
- Vhodná obuv: Wear non-slip, closed-toe footwear.
- Větrání: Tlakový čistič používejte v dobře větraném prostoru, abyste zabránili otravě oxidem uhelnatým.
- Manipulace s palivem: Handle gasoline with extreme care. Store in an approved container. Do not refuel a hot engine.
- Hladina oleje: Ensure proper engine oil level before each use. The unit ships without engine oil; add 10W-30 oil before first use.
- Připojení vody: Ensure a stable water supply. Do not run the pump dry.
- Bezpečnost trysek: Never point the spray gun at people, pets, or electrical components. The high-pressure spray can cause severe injury.
- Děti a domácí mazlíčci: Udržujte děti a domácí zvířata mimo provozní oblast.
Obsah balení
Ověřte, zda jsou všechny níže uvedené položky součástí balení. Pokud některé součásti chybí nebo jsou poškozené, kontaktujte zákaznickou podporu.
- TOOLCY Gas Pressure Washer Unit
- High-Pressure Spray Gun with Swivel Connection
- 21-inch Metal Extension Wand
- 35-foot High-Pressure Hose
- Quick-Connect Nozzles (0°, 15°, 25°, 40°, Soap)
- Nálevka na olej
- Uživatelská příručka

Image: All included accessories for the TOOLCY Gas Pressure Washer, including the 35-foot hose, spray gun, and five quick-connect nozzles.
Shromáždění
Follow these steps to assemble your pressure washer before first use.
- Instalační rukojeť: Attach the main handle to the pressure washer frame. Ensure it clips securely into place.
- Attach Wand Holder: Secure the wand holder to the designated spot on the frame.
- Slide in Hose Hook: Insert the hose hook into its slot for convenient hose storage.
- Přidejte motorový olej: Locate the oil fill cap. Using the provided oil funnel, add 10W-30 engine oil to the crankcase. Do not overfill. The unit ships without oil, but may have minimal residual oil from factory testing.
- Přidat palivo: Fill the fuel tank with fresh, unleaded gasoline. Ensure the fuel cap is securely tightened.
- Připojení vysokotlaké hadice: Attach one end of the 35-foot high-pressure hose to the pressure washer's pump outlet and the other end to the spray gun. Ensure connections are tight.
- Připojte přívod vody: Connect a garden hose (not included) to the water inlet on the pressure washer. Ensure the water supply is turned on fully before starting the engine.

Image: The ergonomic frame and flexible wheels, highlighting the ease of assembly and maneuverability.
Operace
This section details the steps for starting and operating your TOOLCY pressure washer.
Startování motoru
- Ujistěte se, že je jednotka na rovném povrchu.
- Zkontrolujte hladinu motorového oleje a paliva.
- Connect the water supply and turn on the water faucet completely.
- Squeeze the spray gun trigger to purge air from the pump and hose until a steady stream of water emerges. Release the trigger.
- Set the engine switch to "ON".
- Přesuňte páčku sytiče do polohy „SYTIČ“ (pro studený start).
- Pevně a plynule zatáhněte za rukojeť ručního startéru, dokud motor nenaskočí.
- Jakmile motor nastartuje, postupně přesuňte páčku sytiče do polohy „RUN“.

Image: Close-up of the 209cc 4-stroke OHV engine, highlighting its robust design for powerful and efficient operation.
Using Quick-Connect Nozzles
The pressure washer comes with 5 quick-connect nozzles for various cleaning tasks. Always turn off the engine and squeeze the spray gun trigger to release pressure before changing nozzles.
- 0° (červená): Pin-point jet for toughest stains and concentrated cleaning. Use with extreme caution.
- 15° (žlutá): Narrow spray for heavy-duty cleaning of hard surfaces.
- 25° (zelená): Medium spray for general cleaning of most surfaces.
- 40° (bílá): Wide spray for delicate surfaces and light rinsing.
- Mýdlo (černé): Nízkotlaký sprej pro nanášení čisticího prostředku.

Image: Visual representation of the five quick-connect nozzles and their corresponding spray patterns for various cleaning applications.
Aplikace detergentu
To apply detergent, ensure the soap nozzle (black) is installed. The pressure washer features a hose for drawing detergent directly from a soap bottle. Ensure the detergent is suitable for pressure washer use.

Image: Close-up of the spray gun's 360° swivel inlet, designed to prevent hose kinking and improve efficiency during operation.
Údržba
Pravidelná údržba zajistí dlouhou životnost a optimální výkon vašeho tlakového čističe.
- Motorový olej: Před každým použitím zkontrolujte hladinu oleje. Vyměňte olej po prvních 5 hodinách provozu, poté každých 50 hodin nebo ročně.
- Vzduchový filtr: Inspect and clean the air filter regularly, especially in dusty conditions. Replace if damaged.
- Zapalovací svíčka: Zapalovací svíčku každoročně kontrolujte a čistěte. V případě potřeby ji vyměňte.
- Palivový systém: For long-term storage, drain the fuel tank and carburetor or use a fuel stabilizer.
- Čerpadlo: The axial cam pump is designed to be maintenance-free. However, always ensure a clean water supply to prevent debris from entering the pump.
- Trysky: Clean clogged nozzles with a small wire or nozzle cleaning tool.
- Skladování: Store the pressure washer in a dry, protected area, away from extreme temperatures.

Image: Close-up of the improved heavy-duty axial pump, designed for extended service life and reliable performance.
Odstraňování problémů
V této části naleznete běžné problémy a jejich řešení.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Motor se nespustí | No fuel; Low oil; Engine switch OFF; Choke not set; Clogged fuel line/carburetor; Fouled spark plug. | Add fuel; Add oil; Turn engine switch ON; Adjust choke; Clean fuel system; Clean/replace spark plug. |
| Nízkotlaký výstup | Ucpaná tryska; Nedostatečný přívod vody; Vzduch v čerpadle; Opotřebované těsnění čerpadla. | Clean nozzle; Ensure full water flow; Purge air by squeezing trigger; Contact service for pump issues. |
| Motor běží nepravidelně/přerušovaně | Stale fuel; Clogged fuel filter/carburetor; Air filter dirty. | Drain and replace with fresh fuel; Clean/replace fuel filter; Clean air filter. |
| Z čerpadla uniká voda | Uvolněné spoje; Poškozené O-kroužky/těsnění. | Tighten all connections; Inspect and replace O-rings/seals. |
Specifikace
Key technical specifications for the TOOLCY Gas Pressure Washer.
- Značka: TOOLCY
- Model: RM
- Zdroj napájení: Plynový pohon
- Motor: 209cc čtyřtaktní OHV
- Maximální tlak: 3200 PSI
- Maximální průtok: 2.6 GPM
- Délka hadice: 35 stop
- Délka hůlky: 21 palce
- Hmotnost položky: 66 libry
- Rozměry produktu (D x Š x V): 18 cm x 15 cm x 15 cm
- Barva: Modrý
Záruka a podpora
For warranty information, technical support, or to order replacement parts, please contact TOOLCY customer service. Refer to the product packaging or the official TOOLCY webstránky s nejaktuálnějšími kontaktními údaji.
You can also visit the official TOOLCY store on Amazon for more information and support: TOOLCY Amazon Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.