1. Úvod
Thank you for choosing the ALUSSO Motion Sensor Outdoor Flood Light. This manual provides essential information for the safe installation, operation, and maintenance of your new security light. Please read these instructions thoroughly before installation and retain them for future reference.
Image: ALUSSO 30W LED Security Light installed on a house, illuminating the front yard.
2. Bezpečnostní informace
VAROVÁNÍ: NEBEZPEČÍ ÚRAZU ELEKTRICKÝM PROUDEM. Před instalací nebo servisem odpojte napájení pojistkou nebo jističem.
- Tento produkt musí být instalován v souladu s platným instalačním předpisem osobou obeznámenou s konstrukcí a provozem produktu a souvisejícími riziky.
- Use only supplied accessories for installation.
- Ensure the balancing mechanism is secure after installation.
- Výrobek neupravujte ani neupravujte.
- Neinstalujte v blízkosti hořlavých materiálů.
- This fixture is Class II safety-rated and does not require a ground wire.
3. Obsah balení
Před instalací ověřte, zda jsou všechny součásti přítomny a nepoškozené.
Image: Diagram showing the ALUSSO flood light components and included accessories for installation.
- ALUSSO Motion Sensor Outdoor Flood Light Unit (1)
- Montážní držák (1)
- Screws and Wall Anchors (Set)
- Wire Connectors (Yellow Quick-Connects) (Set)
- Waterproof Gasket (1)
- Návod k použití (1)
- Záruční list (1)
4. Konec produktuview
The ALUSSO WL-YDR-230P is a versatile and durable outdoor security light designed to provide powerful illumination and enhanced safety for your property.
Obrázek: Overview of ALUSSO 30W LED Security Light features.
- Power & Brightness: 30W, 3500 Lumens, covering up to 2000 sq. ft.
- Teplota chromatičnosti (3CCT): Adjustable between 3000K (Warm White), 4000K (Natural White), and 6500K (Daylight).
- Operating Modes (3 Modes): Dusk to Dawn (D2D), Auto (Motion Mode), and On Time (Always On).
- Pohybový senzor: 150° wide-angle detection with an adjustable range of 1-40 ft.
- Nastavitelné hlavy: Dual adjustable light heads provide a 100° beam angle, allowing precise light direction.
- Trvanlivost: IP65 waterproof rating, UV resistant, and cold resistant for all-weather performance.
- Bezpečnost: Class II safety-rated, requiring no ground wire.
5. Nastavení a instalace
This flood light is designed for hardwired installation. Ensure power is disconnected before proceeding.
- Vypnout napájení: Locate the circuit breaker controlling the light fixture and turn off the power.
- Příprava zapojení: If replacing an existing fixture, carefully remove it. Ensure the existing wires (Live and Neutral) are accessible.
- Instalace montážního držáku: Attach the provided mounting bracket to your standard 3" or 3.5" round junction box. Use the appropriate screws and anchors for your mounting surface (wall or soffit).
- Připojit dráty: Use the yellow quick-connect terminals to securely connect the light's wires to your household wiring. Connect the white wire from the fixture to the neutral wire, and the black wire from the fixture to the live wire. This is a Class II fixture, so no ground wire connection is needed.
- Připevněte přípravek: Carefully align the flood light unit with the mounting bracket. Ensure the waterproof gasket is properly seated between the fixture and the mounting surface to prevent moisture ingress. Secure the fixture with the provided screws.
- Nastavení světelných hlav: Loosen the wing nuts on the light heads to adjust their angle and direction as needed. Tighten the wing nuts to secure the position.
- Doporučená výška instalace: For optimal sensor performance, install the light at a height of 6.56-9.84 feet (2-3 meters).
Image: Installation steps for the ALUSSO flood light.
Image: Soffit Mounted and Wall Mounted configurations.
6. Návod k obsluze
Your ALUSSO flood light offers adjustable settings for optimal performance.
6.1. Color Temperature (CCT) Adjustment
A dip switch located on the back of the light fixture allows you to select the desired color temperature:
Image: 3 CCT options: Warm White (3000K), Natural White (4000K), and Daylight (6500K).
- WW (teplá bílá): 3000 tis
- NW (Přírodní bílá): 4000 tis
- CW (Daylight): 6500 tis
Note: Adjust the CCT switch before mounting the fixture for easier access.
6.2. Volba provozního režimu
A dip switch on the back of the motion sensor unit allows you to select one of three operating modes:
Image: Three work modes of the ALUSSO flood light.
- D2D Mode (Dusk to Dawn): The light automatically turns on at sunset and turns off at sunrise. The motion sensor is inactive in this mode.
- AUTO Mode (Motion Mode): The light activates when motion is detected within its range. It turns off after a set duration if no further motion is detected.
- ON TIME Mode (Always On): The light is manually controlled via the wall switch. The motion sensor is disabled, and the light remains on until manually switched off.
6.3. Auto Mode Adjustments
When in AUTO Mode, three knobs on the bottom of the motion sensor allow for fine-tuning:
Image: Motion sensor with LUX, SENS, and TIME adjustment knobs.
- LUX (citlivost na jas): Adjusts the ambient light level at which the motion sensor becomes active. Turn towards the sun icon for day and night operation, or towards the moon icon for night-only operation (5-2000 LUX).
- SENS (Detection Range): Controls the sensitivity and detection distance of the motion sensor (1-40 ft).
- ČAS (Trvání): Sets how long the light remains on after motion is detected and no further motion is sensed (10 seconds to 10 minutes).
Video: Official ALUSSO product video demonstrating features and modes.
7. Údržba
To ensure the longevity and optimal performance of your ALUSSO flood light, follow these maintenance guidelines:
- Čištění: Pravidelně čistěte zařízení měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit povrchovou úpravu nebo elektrické součástky.
- Inspekce: Regularly inspect the fixture for any signs of damage, loose connections, or wear. Address any issues promptly.
- Čištění senzoru: Udržujte čočku snímače pohybu čistou a bez překážek (např. nečistot, pavoukůwebs) pro zajištění přesné detekce.
Image: ALUSSO flood light is durable in all weather conditions.
8. Řešení problémů
Pokud máte s reflektorem problémy, podívejte se na následující běžné problémy a jejich řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se nerozsvítí. | No power, incorrect wiring, mode setting. | Check circuit breaker. Verify wiring connections. Ensure correct operating mode is selected. |
| Pohybový senzor nedetekuje. | Incorrect SENS/LUX settings, obstructions. | Adjust SENS to maximum. Adjust LUX towards sun icon. Clear any obstructions from sensor's view. |
| Světlo svítí nepřetržitě. | TIME setting too long, continuous motion, D2D mode selected. | Adjust TIME to a shorter duration. Ensure no constant motion in detection zone. Switch to AUTO mode if D2D is not desired. |
| Světlo bliká. | Loose wiring, unstable power. | Check all wire connections for tightness. Consult an electrician if power supply is unstable. |
9. Specifikace
| Funkce | Specifikace |
|---|---|
| Název modelu | 30W Flood Lights Outdoor Motion Sensor |
| Číslo dílu | WL-YDR-230P |
| Wattage | 30 wattů |
| Jas | 3500 XNUMX lumenů |
| Teplota barev | 3000K/4000K/6500K (nastavitelná) |
| svtage | 120 voltů (AC) |
| Úhel detekce pohybu | 150° |
| Rozsah detekce pohybu | 1–40 m (nastavitelné) |
| Light Duration (Auto Mode) | 10 sekund - 10 minut (nastavitelné) |
| Úroveň odolnosti proti vodě | IP65 Vodotěsný |
| Vnitřní/venkovní použití | Venkovní |
| Typ instalace | Hardwired, Wall Mount/Soffit Mount |
| Rozměry produktu | 9.45 cm D x 6.9 cm Š x 5.12 cm V |
| Hmotnost položky | 1.52 liber (0.69 kilogramů) |
| Průměrný život | 30000 hodiny |
| Hodnocení bezpečnosti | ETL Listed, Class II (no ground wire required) |
10. Záruka a podpora
ALUSSO provides a 3-letá záruka for this product, as indicated on the packaging. Additionally, a 5-year manufacturer's coverage is offered, ensuring repair or replacement for any defects in materials or workmanship under normal use.
For any inquiries, technical support, or warranty claims, please contact ALUSSO customer service:
- E-mail: service-support@alussolighting.com
- Webmísto: www.alussolighting.com