1. Úvod
This instruction manual provides essential information for the safe and efficient operation of your Walfront Smart Home Floor Heating Thermostat. Please read this manual thoroughly before installation and use, and retain it for future reference. This electric underfloor heating thermostat is designed for precise temperature control in your home, offering smart features and user-friendly functions.
2. Obsah balení
Ověřte, zda jsou v balení přítomny všechny položky:
- 1 x Electric Underfloor Heating Thermostat
- 1 x Sensor Probe
- 2 x šrouby
- 1 x Uživatelská příručka
3. Specifikace
| Typ položky | Termostat elektrického podlahového topení |
| Materiál | PC zpomalovač hoření |
| Velikost | Přibližně 86 × 90 × 13 mm / 3.39 × 3.54 × 0.51 palce |
| Napájení | AC85V-250V 50/60 Hz |
| Snímač teploty | Negativní teplotní koeficient |
| Přesnost regulace teploty | ±1℃ |
| Zatěžovací proud | ≤16A |
| Temperature Difference Start | 1 až 10 ℃ |
| Teplotní rozsah podlahy | 5 to 65℃ / 41 to 149℉ |
| Nastavte teplotu | +5 to +50℃ / +41 to +122℉ |
| Ochrana proti vysoké teplotě | +5 to +65℃ / +41 to 149℉ |
| Zobrazení teploty | -20 to +80℃ / -4 to +176℉ |
| Způsob instalace | Nástěnná |
4. Bezpečnostní informace
- Always cut off the main power supply before any installation, wiring, or maintenance.
- Instalaci by měl provádět kvalifikovaný odborník nebo by měla být provedena v souladu s místními elektrotechnickými předpisy.
- Do not install the thermostat in areas with direct sunlight, drafts, or near heat sources, as this may affect temperature readings.
- Ensure proper wiring connections to prevent damage to the device or electrical hazards.
- Keep the device dry and avoid exposure to moisture or liquids.
5. Instalační příručka
The thermostat is designed for easy, wall-mounted installation. Follow these steps carefully:
5.1 Demontáž
To access the wiring terminals, the front panel of the thermostat must be separated from the back plate.
- Locate the small groove on the side of the thermostat.
- Carefully insert a small flathead screwdriver into the groove and gently pry to lift the display part.
- Separate the display unit from the back mounting plate.
5.2 Zapojení
Before wiring, ensure the main power supply to your heating system is turned off at the circuit breaker.
- Připojení napájení: Connect the main power supply wires to the
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.