EASYGUARD EC013 DIY Car & Motorcycle Alarm System

1. Úvod

The EASYGUARD EC013 is a compact and versatile DIY alarm system designed for both DC12V cars and motorcycles. This system offers essential security features with a focus on easy installation, making it suitable for users who prefer a straightforward setup. Its integrated unit and siren design save space while providing robust protection against unauthorized access and theft.

Obrázek 1.1: Konecview of the EASYGUARD EC013 alarm system components, including the main unit with integrated siren, two remote controls, LED indicator, and wiring harness.

2. Co je v krabici

Po otevření balení se prosím ujistěte, že jsou součástí balení všechny následující komponenty:

• Control module (main unit with integrated siren)
• Two (2) Key fobs (remote controls)
• Kabelový svazek
• LED indikátor

Obrázek 2.1: Detailní view of all included product accessories: the alarm unit & siren, two remote controls, the LED indicator, and the main wire harness.

3. Specifikace

4. Instalační příručka

The EASYGUARD EC013 is designed for easy DIY installation, requiring connection of only a few wires. Please follow the wiring diagram carefully to ensure proper functionality and avoid damage to your vehicle or the alarm system.

4.1. Schéma zapojení

Image 4.1: Detailed wiring diagram showing connections for the alarm system. Ensure all connections are secure and insulated.

4.2. Kroky připojení

1. Červený drát: Connect to the positive (+) terminal of the DC 12V battery.
2. Černý drát: Connect to the negative (-) terminal of the DC 12V battery (ground).
3. Bílý drát: Connect to ACC (+) (Accessory power, typically active when ignition is on).
4. Oranžový drát: Connect to Ignition Cut (-) (This wire is used to interrupt the ignition circuit for engine immobilization. Consult a professional if unsure about this connection).
5. Modrý drát: Connect to the Door Trigger (-) (Connect to the vehicle's door pin switch that provides a negative signal when the door is opened).
6. LED indikátor: Plug the LED indicator into its designated port on the main unit. Mount the LED in a visible location on your dashboard.

Důležité: Ensure all connections are properly insulated to prevent short circuits. If you are not confident with electrical wiring, it is recommended to seek professional assistance.

5. Návod k obsluze

The EC013 alarm system is operated using the provided remote controls. Familiarize yourself with the button functions for optimal use.

5.1. Funkce dálkového ovládání

Image 5.1: Diagram illustrating the functions of the remote control buttons.

• Top Button (Locked Padlock Icon):
  1. Paže: Press once to arm the alarm system. The vehicle will be protected.
  2. Panika: Press and hold for 2 seconds to activate the panic alarm.
  3. Special Protection Mode: This mode is activated when the system is armed.
  4. Shock Sensor Sensitivity Adjust: Press and hold for 2 seconds to enter shock sensor sensitivity adjustment mode.
• Bottom Button (Unlocked Padlock Icon):
  1. Odzbrojit: Press once to disarm the alarm system.
  2. Activate/Deactivate Current Sensor: Press and hold for 2 seconds to toggle the current sensor on or off.

5.2. Režimy ochrany

The EC013 features different protection modes to enhance vehicle security.

5.2.1. Night Protection Mode

This mode provides comprehensive protection during nighttime or when the vehicle is parked for extended periods. It triggers the alarm based on multiple inputs:

• 2-stage shock sensor trigger
• ACC (Accessory) trigger
• Door trigger
• Current sensor trigger

Image 5.2: Illustration of Night Protection mode, showing how different triggers (shock, ACC, door, current sensor) activate the 120dB alarm.

5.2.2. Special Protection Mode

This mode focuses on core intrusion detection, triggering the alarm based on key access points:

• ACC (Accessory) trigger
• Door trigger
• Current sensor trigger

Image 5.3: Illustration of Special Protection mode, highlighting ACC, door, and current sensor triggers for the 120dB alarm.

6. Údržba

To ensure the longevity and optimal performance of your EASYGUARD EC013 alarm system, follow these general maintenance guidelines:

• Udržujte v suchu: Avoid exposing the main unit and remote controls to water or excessive moisture.
• Teplota: Do not expose the system to extreme temperatures (very hot or very cold) for prolonged periods.
• Dálková baterie: Replace the CR2 batteries in the remote controls when the LED indicator on the remote becomes dim or the range decreases.
• Čistota: Periodically wipe the main unit and remote controls with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Kontrola zapojení: Occasionally inspect the wiring connections for any signs of wear, corrosion, or loose connections.

7. Řešení problémů

If you encounter issues with your EC013 alarm system, refer to the following common problems and their solutions:

Pokud problém přetrvává i po vyzkoušení těchto řešení, kontaktujte zákaznickou podporu.

8. Záruka a podpora

8.1. Informace o záruce

The EASYGUARD EC013 DIY Car & Motorcycle Alarm System comes with a 1-letá záruka od data nákupu. Tato záruka se vztahuje na výrobní vady a poruchy při běžném používání. Nevztahuje se na škody způsobené nesprávnou instalací, zneužitím, nehodami nebo neoprávněnými úpravami.

Uschovejte si prosím doklad o koupi pro uplatnění záruky.

8.2. Zákaznická podpora

For technical assistance, warranty claims, or any questions regarding your EASYGUARD EC013 alarm system, please contact the manufacturer:

• Výrobce Webmísto: ieasyguard.com
• Amazon Store: Navštivte EASYGUARD Store on Amazon pro informace o produktech a zdroje podpory.

When contacting support, please have your product model number (EC013) and purchase details ready.