Uživatelská příručka k hustilce pneumatik HPBS 5000A a startovacímu kabelu do auta 3000A

Zavedení

Thank you for choosing the HPBS 5000A Tire Inflator and 3000A Car Jump Starter. This comprehensive device is designed to provide reliable roadside assistance for various vehicles, combining the essential functions of a powerful jump starter, a precise tire inflator, an LED flashlight, and a portable power bank. Please read this manual thoroughly before operating the device to ensure safe and efficient use.

Image: The HPBS 5000A Tire Inflator (right) and 3000A Car Jump Starter (left) shown together, highlighting their compact design.

Bezpečnostní informace

Vždy dodržujte následující bezpečnostní opatření, abyste předešli zranění nebo poškození zařízení a vozidla:

• Udržujte zařízení mimo dosah dětí.
• Nevystavujte zařízení dešti ani extrémním teplotám.
• Během provozu a nabíjení zajistěte dostatečné větrání.
• Nepokoušejte se zařízení rozebírat nebo upravovat.
• Používejte pouze dodané příslušenství a kabely.
• Zabraňte zkratu startovacího kabeluamps.
• Wear eye protection when operating the jump starter.
• Do not over-inflate tires; always refer to the vehicle's recommended tire pressure.

Obrázek: Vizuální znázornění 10 vestavěných bezpečnostních ochran, včetně odolnosti proti jiskrám, přebití, nadproudu, zkratu, přehřátí, extrémní teploty a přepětí.tage, reverse connection, reverse polarity, and over-discharge protection.

Konec produktuview

Komponenty a funkce

The HPBS 5000A Tire Inflator and 3000A Car Jump Starter are designed for versatility and ease of use.

Startér do auta 3000A

• Výstupní port EC5: For connecting smart jump cables.
• Tlačítko ON/OFF: Napájí zařízení.
• LED svítilna: Provides illumination with Normal, Strobe, and SOS modes.
• USB Output Ports (USB1, USB2): Pro nabíjení externích zařízení.
• Vstupní port USB-C: Pro nabíjení startovací jednotky.
• Kontrolky: Show battery level and status.
• Digitální displej: Ukazuje procento baterietage.

Obrázek: Detail view of the 3000A Jump Starter, labeling the EC5 Output Port, ON/OFF Button, LED Flashlight, USB Output 1, USB-C Input, USB Output 2, and Indicator Lights.

5000A Tire Inflator

• Inflator Interface: For connecting the air hose.
• Star Output Port: (Likely a DC output for specific accessories, or mislabeled from jump starter)
• Displej: Shows current pressure, target pressure, and unit.
• Preset Air Pressure Plus Key (+): Zvyšuje tlak na cíl.
• Mode/Unit Switching Button: Toggles between PSI, KPA, BAR, Kg/cm² and preset modes (car, motorcycle, bicycle, ball).
• Power Supply/Inflation Start Button: Initiates or stops inflation.
• Tlačítko osvětlení: Activates the LED light.
• Preset Air Pressure Key Reduction (-): Snižuje cílový tlak.
• LED osvětlení: Built-in light for visibility.
• Výstupní port USB: Pro nabíjení externích zařízení.
• Vstupní port typu C: For charging the inflator unit.

Obrázek: Detail view of the 5000A Tire Inflator, labeling the display screen, preset air pressure keys, mode/unit button, power/inflation button, lighting button, LED lighting, USB output port, Type-C input port, inflator interface, and star output port.

Nastavení

Počáteční nabíjení

Before first use, fully charge both the 5000A Tire Inflator and the 3000A Car Jump Starter.

1. Connect the provided USB-C charging cable to the Type-C Input Port on each device.
2. Connect the other end of the cable to a USB wall adapter (not included) or a powered USB port.
3. The digital display on each device will indicate the charging status. Charge until the display shows 100%.

It is recommended to fully charge the devices every 3-6 months, even when not in use, to maintain battery health.

Návod k obsluze

Using the 3000A Car Jump Starter

This jump starter is designed to safely start vehicles with dead batteries.

1. Ujistěte se, že je startovací baterie nabita alespoň na 50 %.
2. Connect the smart jump cable's blue end into the EC5 Output Port of the jump starter.
3. Připojte červenou třamp ke kladnému (+) pólu baterie vozidla.
4. Připojte černou třamp k zápornému (-) pólu baterie vozidla.
5. Ujistěte se, že třamps are securely attached and there is no corrosion.
6. Nastartujte motor vozidla.
7. Jakmile motor nastartuje, ihned vyjměte kl.amps from the vehicle battery, first the black (-) clamp, pak červená (+) clamp.
8. Disconnect the smart jump cable from the jump starter.

Důležité: If the vehicle does not start on the first attempt, wait at least 30 seconds before trying again. Do not attempt more than 3 consecutive starts.

Image: The HPBS 3000A Jump Starter connected to a car battery with its red and black clamps, demonstrating its use for jump-starting a vehicle.

Image: The HPBS 3000A Jump Starter connected to a car battery, illustrating its capability to jump-start various vehicle types including vans, pick-ups, SUVs, motorboats, motorcycles, and lawn mowers.

Using the 5000A Tire Inflator

Inflate tires and other inflatables with precision.

1. Connect the air hose to the Inflator Interface on the device.
2. Screw the air hose nozzle onto the tire valve stem.
3. Press the Mode/Unit Switching Button to select the desired unit (PSI, KPA, BAR, Kg/cm²) and preset mode (car, motorcycle, bicycle, ball).
4. Use the Preset Air Pressure Plus (+) and Minus (-) keys to set the target pressure. Refer to your vehicle's manual or door jamb sticker for recommended tire pressure.
5. Press the Power Supply/Inflation Start Button to begin inflation. The device will automatically stop when the target pressure is reached.
6. Unscrew the air hose nozzle from the tire valve stem and disconnect the hose from the inflator.

Image: The HPBS 5000A Tire Inflator connected to a car tire, demonstrating its cordless operation and pressure detection capability.

Using the LED Flashlight (Both Devices)

Both the jump starter and tire inflator feature an integrated LED flashlight.

• On the 3000A Jump Starter, press and hold the ON/OFF button to activate the flashlight. Press again to cycle through Normal, Strobe, and SOS modes. Press and hold to turn off.
• On the 5000A Tire Inflator, press the Lighting Button to activate the flashlight. Press again to cycle through modes (if applicable). Press again to turn off.

Using as a Portable Power Bank (Both Devices)

Both devices can charge your electronic gadgets.

• Connect your device's USB charging cable to one of the USB Output Ports on the jump starter or tire inflator.
• Zařízení se začne automaticky nabíjet.

Image: The HPBS 3000A Jump Starter functioning as a 74WH portable power bank, charging a mobile phone and a tablet simultaneously.

Údržba

• Čištění: Otřete zařízení měkkým, suchým hadříkem. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky.
• Skladování: Store the devices in a cool, dry place, away from direct sunlight and extreme temperatures.
• Nabíjení: Recharge the devices every 3-6 months to maintain battery life, even if not used.
• Péče o kabely: Zkontrolujte kabely a clamps for damage before each use. Replace if frayed or damaged.

Odstraňování problémů

Specifikace

• Značka: HPBS
• Číslo modelu: 4726f0d1-c453-4aaa-b8f1-1288963ca631
• Jump Starter Peak Current: 3000A
• Tire Inflator Pressure: Až 150 PSI
• Kapacita baterie: Approx. 74WH (for power bank function)
• Vstup: USB-C
• výstup: USB-A (for charging devices), EC5 (for jump starting)
• Typ servisu vozidla: Automobilový průmysl
• Datum první dostupnosti: 21. listopadu 2024

Záruka a podpora

For warranty information and technical support, please refer to the product packaging or contact HPBS customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official HPBS store on Amazon: HPBS Store