Richmat HJH55 Remote and HJC18 Control Box for Adjustable Bed Base - Model A Instruction Manual

Zavedení

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Richmat HJH55 Remote Control and HJC18 Control Box combination, designed for adjustable bed bases. Please read this manual thoroughly before use to ensure proper function and longevity of your product.

Image: The Richmat HJH55 Remote Control and HJC18 Control Box, presented as a combined unit for adjustable bed bases.

Nastavení

1. Kontrola kompatibility

Before installation, verify that the HJC18 Control Box and HJH55 Remote Control are compatible with your existing adjustable bed base. Compare the ports on the new control box with your previous one. This product is specifically Model A. Refer to the comparison images to ensure you have the correct model.

Image: A visual comparison between Richmat HJC18 Control Box Model A and Model B, highlighting differences for compatibility verification.

Image: A visual comparison of Richmat HJC18 Control Box Model A and Model B, each shown with its corresponding remote control for proper identification.

2. Control Box Installation (HJC18)

1. Disconnect your adjustable bed base from the main power supply.
2. Carefully remove your previous control box and its associated cables.
3. Connect all necessary cables from your bed base (e.g., motor cables, power cable) to the corresponding ports on the new Richmat HJC18 Control Box. Ensure a secure connection for each cable.
4. Secure the HJC18 Control Box in its designated location on the bed base.

Obrázek: Nahoře view of the Richmat HJC18 Control Box, showing its identification label and general layout.

Obraz: View of the Richmat HJC18 Control Box, displaying its various connection ports for bed base components.

3. Remote Control Battery Installation (HJH55)

The HJH55 remote control requires 2x AAA batteries (not included). Open the battery compartment on the back of the remote and insert the batteries, observing the correct polarity (+/-). Close the compartment securely.

Obrázek: Přední strana view of the Richmat HJH55 Remote Control, showing its buttons and layout.

4. Pairing the Remote Control and Control Box

The remote control and control box may not be pre-paired. Follow these steps to establish a connection:

1. Ensure the control box is connected to power.
2. Locate the 'LEARN' or 'PROGRAM' button on the HJC18 Control Box. This button is typically on the side or top of the box.
3. Press and hold the 'LEARN' or 'PROGRAM' button on the control box for approximately 3-5 seconds until an indicator light on the control box begins to flash.
4. Immediately after the light starts flashing, press any button on the HJH55 Remote Control.
5. The indicator light on the control box should stop flashing and remain solid, or turn off, indicating successful pairing.
6. Test the remote control by pressing various function buttons to ensure the bed base responds correctly.

Návod k obsluze

The HJH55 remote control provides various functions for adjusting your bed base. Familiarize yourself with the button layout:

Obrázek: Přední strana view of the Richmat HJH55 Remote Control, illustrating the function of each button.

• TELEVIZE: Adjusts the bed to a comfortable TV viewing pozice.
• SALON: Sets the bed to a relaxed lounge position.
• ZG (Nulová gravitace): Positions the bed to a zero-gravity setting, which can relieve pressure.
• HEAD UP/DOWN Arrows: Nastavuje hlavovou část postele nahoru nebo dolů.
• FOOT UP/DOWN Arrows: Nastavuje nožní část postele nahoru nebo dolů.
• M1 / M2: Memory preset buttons. Press and hold to save a custom position; press briefly to recall a saved position.
• BYT: Vrací postel do zcela vodorovné polohy.
• 10 MIN / 20 MIN: Timer functions for massage or other features (if applicable to your bed base).
• HEAD / FOOT (Massage): Activates or adjusts massage functions for the head or foot sections (if applicable).
• ČASOVAČ / VŠE VYP: Controls timer functions or turns off all active features.
• SVĚTLO: Activates or deactivates under-bed lighting or other integrated lights (if applicable).
• REŽIM: Cycles through different massage modes or other operational modes (if applicable).

Údržba

Obecná péče

• Keep the remote control and control box clean and dry. Avoid exposure to liquids.
• Clean surfaces with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Zabraňte pádu dálkového ovladače nebo jeho vystavování silným nárazům.

Výměna baterie

When the remote control's range decreases or buttons become unresponsive, replace the AAA batteries. Always replace both batteries simultaneously with new ones, ensuring correct polarity.

Odstraňování problémů

Specifikace

• Název produktu: Richmat HJH55 Remote and HJC18 Control Box
• Model: A
• Výrobce: Richmat
• Kompatibilní zařízení: Nastavitelná základna postele
• Technologie připojení: Infračervený
• Typ ovladače: Ovládání tlačítkem
• Maximální rozsah: 12 metrů
• Typ baterie dálkového ovladače: 2x AAA (není součástí balení)
• Control Box Input: DC 24-30V, 8A Max (as per image label)
• Control Box Output: DC 24-30V (as per image label)

Záruka

This Richmat product comes with a 2 rok omezená záruka. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from misuse, accidents, unauthorized modifications, or improper installation. Please retain your proof of purchase for warranty claims.

Podpora

If you require assistance with setup, troubleshooting, or have general inquiries regarding your Richmat HJH55 Remote and HJC18 Control Box, please contact your product retailer or the manufacturer's customer support. Provide your product model (Model A) and a detailed description of the issue for efficient support.