MLWSHR 8808

MLWSHR Digital LED Alarm Clock Model 8808 Instruction Manual

Model: 8808

1. Úvod

Děkuji za nákupasing the MLWSHR Digital LED Alarm Clock Model 8808. This device combines a digital alarm clock with a thermo-hygrometer, offering dual alarms, snooze function, date and year display, 12/24 hour switch, weekday settings, Daylight Saving Time (DST) functionality, auto-dimmable display with three brightness levels, and a convenient 5V1A USB output for charging other devices. Please read this manual carefully to ensure proper use and maintenance of your new alarm clock.

2. Bezpečnostní informace

  • Uchovávejte zařízení mimo dosah vody a prostředí s vysokou vlhkostí.
  • Nevystavujte zařízení extrémním teplotám ani přímému slunečnímu záření po delší dobu.
  • Use only the provided USB Type-C cable for power.
  • Nepokoušejte se zařízení rozebírat ani opravovat sami. V případě problémů kontaktujte zákaznickou podporu.
  • Ensure proper ventilation when using the USB output to charge other devices.

3. Obsah balení

  • MLWSHR Digital LED Alarm Clock Model 8808
  • Napájecí kabel USB Type-C
  • Uživatelská příručka

4. Konec produktuview

Seznamte se s hlavními součástmi a ovládacími prvky budíku.

Přední view of the MLWSHR Digital LED Alarm Clock showing time, weekday, temperature, humidity, and alarm icons.
Figure 4.1: Front Display Overview
This image displays the front of the MLWSHR Digital LED Alarm Clock, highlighting the time display, weekday indicators, temperature in Celsius, humidity percentage, and dual alarm icons. It also points to the Daylight Saving Time (DST) indicator.
Boční a zadní strana view of the MLWSHR Digital LED Alarm Clock showing power supply options and buttons.
Figure 4.2: Side and Back Panel
This image illustrates the side and back of the alarm clock, detailing the USB Type-C input for primary power, the battery compartment for 3x AAA backup batteries (not included), and the USB-A output (5V1A) for charging other devices. It also shows the control buttons located on the top edge.

Ovládání:

  • Tlačítko SET: Vstupuje do režimu nastavení času, data a budíků.
  • Tlačítko NAHORU (+): Increases values during setting, adjusts brightness.
  • Tlačítko DOLŮ (-): Decreases values during setting, adjusts brightness.
  • Tlačítko ODLOŽENÍ/OSVĚTLENÍ: Aktivuje odložení budíku, upravuje jas displeje.
  • Tlačítko ALARM 1: Activates/deactivates Alarm 1, enters Alarm 1 setting.
  • Tlačítko ALARM 2: Activates/deactivates Alarm 2, enters Alarm 2 setting.
  • Tlačítko 12/24HR: Přepíná mezi 12hodinovým a 24hodinovým formátem času.
  • Tlačítko °C/°F: Switches between Celsius and Fahrenheit temperature display.

5. Nastavení

5.1 napájecí zdroj

The MLWSHR Digital LED Alarm Clock can be powered in two ways:

  1. Primary Power (USB Type-C): Connect the provided USB Type-C cable to the clock's input port and plug the other end into a 5V1A USB power adapter (not included). When powered via USB, the display will remain continuously on.
  2. Backup Power (3x AAA Batteries): Insert 3 AAA batteries (not included) into the battery compartment on the back of the clock. In battery-only mode, the display will enter sleep mode to conserve power. Press any button to temporarily activate the display. Note that the USB output for charging other devices is not supported when operating on battery power alone.

5.2 Počáteční nastavení času a data

After connecting power, the clock will typically display a default time. To set the correct time and date:

  1. Stiskněte a podržte SOUBOR po dobu 3 sekund pro vstup do režimu nastavení času. Číslice hodin budou blikat.
  2. Použijte NAHORU (+) or DOLŮ (-) tlačítka pro nastavení hodiny.
  3. Stiskněte SOUBOR znovu pro potvrzení hodiny a přechod k nastavení minut. Číslice minut budou blikat.
  4. Použijte NAHORU (+) or DOLŮ (-) tlačítka pro nastavení minut.
  5. Pokračujte v stisknutí SOUBOR to cycle through and set the Year, Month, and Day using the NAHORU (+) or DOLŮ (-) buttons for adjustment.
  6. After setting the Day, press SOUBOR naposledy pro ukončení režimu nastavení.

6. Návod k obsluze

6.1 12/24 Hour Format Switch

Stiskněte tlačítko 12/24 hodin button to toggle between 12-hour (with AM/PM indicator) and 24-hour time formats.

Video 6.1: Digital LED Alarm Clock Features Overview
This video demonstrates various features of the MLWSHR Digital LED Alarm Clock, including the time, temperature, humidity, weekday display, auto/manual brightness adjustment, 12/24 hour switch, and the easy-to-use buttons and USB-C input/USB-A output.

6.2 Nastavení alarmů (Alarm 1 a Alarm 2)

The clock features two independent alarms. Each alarm can be set for specific days of the week (Monday-Friday, Monday-Saturday, or Monday-Sunday).

Image showing dual alarm settings and weekday customization options.
Figure 6.2: Dual Alarm and Weekday Settings
This image illustrates the dual alarm functionality, showing how each alarm can be customized to ring on specific days of the week: Monday to Friday, Monday to Saturday, or every day. It highlights the alarm icons and weekday indicators on the display.
  1. Stiskněte tlačítko POPLACH 1 or POPLACH 2 button to select the desired alarm. The alarm icon will appear on the display.
  2. Press and hold the selected POPLACH button for 3 seconds to enter alarm setting mode. The hour digits will flash.
  3. Použijte NAHORU (+) or DOLŮ (-) tlačítka pro nastavení hodiny budíku.
  4. Stiskněte tlačítko POPLACH znovu stiskněte tlačítko pro potvrzení hodin a přechod k nastavení minut.
  5. Použijte NAHORU (+) or DOLŮ (-) tlačítka pro nastavení minut budíku.
  6. Stiskněte tlačítko POPLACH button again to set the alarm frequency (e.g., Mon-Fri, Mon-Sat, Mon-Sun). Use NAHORU (+) or DOLŮ (-) vybrat.
  7. Stiskněte tlačítko POPLACH button one last time to exit alarm setting mode.
  8. To turn an alarm ON or OFF, simply press the corresponding POPLACH 1 or POPLACH 2 button briefly. The alarm icon will appear (ON) or disappear (OFF) from the display.

6.3 Funkce odložení

When an alarm sounds, you can activate the snooze function for a temporary delay.

Image demonstrating the snooze function with a person sleeping and the clock display.
Obrázek 6.3: Funkce odložení buzení
This image shows the clock's snooze button and how it functions. When the alarm rings, a brief press of the snooze button will delay the alarm for 5 minutes. Holding the button for more than two seconds will turn off the alarm for that day.
  • Když budík zazvoní, stiskněte tlačítko SNOOZE / SVĚTLO button briefly. The alarm will pause and ring again after 5 minutes.
  • To turn off the alarm for the current day, press and hold the SNOOZE / SVĚTLO button for more than 2 seconds, or press any other button (except SNOOZE / SVĚTLO).

6.4 Nastavení jasu

The clock features an auto-dimmable display and three manual brightness levels.

  • Automatické stmívání: The built-in light sensor automatically adjusts the display brightness based on ambient light conditions. This is the default setting.
  • Manuální nastavení jasu: Krátce stiskněte SNOOZE / SVĚTLO button to cycle through 3 manual brightness levels (L-01, L-02, L-03).
  • To return to auto-dimmable mode, continue pressing the SNOOZE / SVĚTLO button until 'L-AU' appears on the display.

6.5 Thermometer & Hygrometer

The clock displays indoor temperature and humidity levels.

Image showing the thermometer and hygrometer display with environmental recommendations.
Figure 6.4: Thermometer and Hygrometer Display
This image highlights the temperature and humidity readings on the clock's display. It also provides guidance on ideal humidity levels and suggests actions (humidifier/dehumidifier) if levels are too low or too high. The temperature detection range is 23°F to 122°F (-5°C to 50°C) with an error margin of ±2°F.
  • Přepínač jednotky teploty: Stiskněte tlačítko ° C / ° F button to switch between Celsius and Fahrenheit temperature display.
  • The temperature range is 23°F to 122°F (-5°C to 50°C) with an error margin of ±2°F.
  • The humidity measurement error is within ±5%.

6.6 USB Power Output (5V1A)

The clock features a USB-A output port (5V1A) that can be used to charge other electronic devices.

Image showing a phone being charged via the clock's USB output.
Figure 6.5: USB Output for Charging
This image demonstrates the use of the clock's USB-A output port to charge a smartphone. The clock provides a 5V1A output, making it a convenient charging station. This feature is only available when the clock is powered via its USB Type-C input.
  • Connect your device's charging cable to the USB-A output port on the back of the alarm clock.
  • Ensure the alarm clock is powered via its USB Type-C input for this feature to function. The USB output is not active when the clock is running on battery power alone.

6.7 Letní čas (DST)

The clock supports Daylight Saving Time adjustment.

  • Chcete-li aktivovat nebo deaktivovat letní čas, stiskněte a podržte tlačítko DST button (if available, or refer to the SET button sequence for DST in specific models). The DST indicator will appear or disappear.

7. Údržba

  • Hodiny čistěte měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
  • If the clock will not be used for an extended period, remove the AAA batteries to prevent leakage.
  • Keep the USB ports free from dust and debris.

8. Řešení problémů

ProblémMožná příčinaŘešení
Displej je vypnutý nebo se zobrazuje přerušovaně.Running on battery power in sleep mode, or no power.Press any button to activate display in battery mode. Connect USB Type-C cable for continuous display. Check USB power source.
USB output not charging devices.Clock is running on battery power, or USB cable is faulty.Ensure the clock is connected to primary USB Type-C power. Try a different USB cable.
Alarm se nespustí.Budík není aktivovaný nebo je nesprávně nastavený.Check if the alarm icon is displayed. Re-set the alarm time and frequency.
Odečet teploty je nepřesný.Environmental factors or sensor error.Allow time for the sensor to stabilize. Ensure the clock is not near heat sources or vents. Note the ±2°F error margin.
Cannot set time/date.Not in setting mode, or buttons are unresponsive.Press and hold the SET button for 3 seconds. Ensure the clock has stable power.

9. Specifikace

  • Značka: MLWSHR
  • Číslo modelu: 8808
  • Typ displeje: LED
  • Zdroj napájení: USB Type-C (5V1A) / 3x AAA Batteries (backup)
  • Rozměry produktu: 3.54 cm Š x 4.72 cm V
  • Vlastnosti: Dual Alarms, Snooze, Thermo-Hygrometer, Date & Year Display, 12/24 Hour Switch, Weekdays, DST, Auto Dimmable (3 levels), USB Output (5V1A)
  • Materiál: Eco-friendly Plastic
  • Vnitřní/venkovní použití: Krytý

10. Záruka a podpora

The MLWSHR Digital LED Alarm Clock Model 8808 comes with a 2-letá záruka od data nákupu. Tato záruka se vztahuje na výrobní vady a poruchy při běžném používání.

For technical support, warranty claims, or any questions regarding your product, please contact MLWSHR customer service through the retailer's platform or visit our official website for contact information. Please have your purchase receipt and model number ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.