SEBSON IR_ES_EA

SEBSON Recessed Ceiling Motion Detector (IR_ES_EA) - Anthracite

Návod k použití

1. Úvod

Thank you for choosing the SEBSON Recessed Ceiling Motion Detector. This device is designed for indoor use to automatically control lighting based on motion and ambient light levels. Please read this manual carefully before installation and operation to ensure proper function and safety.

Přední view of the SEBSON recessed ceiling motion detector with key specifications overlaid: 8m/360° detection, up to 1000W LED, IP20, 10sec-30min timer, 3-2000 LUX, 230V.
Obrázek 1: Přesview of the motion detector and its main features.

2. Bezpečnostní pokyny

  • Instalaci musí provést kvalifikovaný elektrikář v souladu s místními předpisy pro elektroinstalaci.
  • Disconnect power at the main circuit breaker before installation or maintenance.
  • Do not exceed the maximum load capacity of the detector (2000W for incandescent, 1000W for LED).
  • Tento výrobek je určen pouze pro vnitřní použití. Vyvarujte se vystavení vlhkosti nebo extrémním teplotám.
  • Zajistěte řádné větrání kolem zařízení.

3. Vlastnosti produktu

  • Indoor motion detector for recessed ceiling mounting.
  • Wide detection range of 8 meters and 360 degrees.
  • Adjustable operating duration from 10 seconds to 30 minutes.
  • Adjustable ambient light sensitivity from 3 to 2000 lux.
  • Compatible with LED lighting (max 1000W) and incandescent bulbs (max 2000W).
  • 3-wire connection for reliable operation.

4. Obsah balení

  • 1x SEBSON Recessed Ceiling Motion Detector (Anthracite)
  • 1x Návod k použití

5. Instalace

Důležité: Před zahájením instalace se ujistěte, že je hlavní jistič odpojen od napájení.

  1. Prepare a mounting hole in the ceiling with a diameter of 63-66 mm. Ensure there is sufficient depth (minimum 45 mm) for the detector.
  2. Connect the wiring according to the diagram below. The detector requires a 3-wire connection (Live, Neutral, Switched Live).
  3. Insert the detector into the prepared hole. The spring clips will secure it in place.
  4. Obnovte napájení a otestujte funkčnost.

5.1. Konec produktuview a Rozměry

Přední view of the SEBSON recessed ceiling motion detector in anthracite color.
Obrázek 2: Přední strana view of the motion detector. This image shows the anthracite-colored circular housing with the central infrared sensor dome.
Technical drawing showing the dimensions of the motion detector: 75mm diameter, 42mm height, 60mm internal width, 34mm internal height, 31mm spring length, 3mm bezel thickness.
Figure 3: Detailed dimensions of the motion detector. The overall diameter is 75mm, and the height is 42mm. The mounting hole diameter should be between 63-66mm.
Strana view diagram illustrating the recessed installation, showing a minimum installation depth of 45mm and a ceiling thickness of up to 20mm.
Figure 4: Installation depth requirement. A minimum depth of 45mm is needed for proper recessed mounting.
Zadní view of the motion detector showing the wiring terminal block and spring clips.
Obrázek 5: Zadní view showing the wiring terminal. This is where the Live, Neutral, and Switched Live wires are connected.

6. Obsluha a seřízení

The motion detector features two adjustable dials on the back for 'TIME' (duration) and 'LUX' (light sensitivity).

Zadní view of the motion detector showing the 'TIME' and 'LUX' adjustment dials. The TIME dial ranges from 10s to 30min, and the LUX dial from 3 to 2000 lux.
Figure 6: Adjustment dials for TIME and LUX settings.

6.1. Nastavení času

The 'TIME' dial controls how long the connected light remains on after motion is detected and no further motion is sensed. Rotate the dial to set the desired duration:

  • 10s: Minimum duration (10 seconds).
  • 30 minut: Maximum duration (30 minutes).

6.2. LUX Adjustment

The 'LUX' dial determines the ambient light level at which the detector will activate. This allows the light to only turn on when it's dark enough.

  • 3: Activates only in very dark conditions (e.g., night).
  • 2000: Activates in all light conditions (day and night).

To set the LUX level, turn the dial to the sun symbol (2000 lux) for testing during daylight. Once satisfied with the detection, adjust the dial towards the moon symbol (3 lux) to the desired ambient light level for automatic operation.

6.3. Detekční rozsah

Diagram showing the 360-degree detection area of the motion detector, with a maximum range of 8 meters and an installation height between 1.8m and 4m.
Figure 7: Detection range and angle. The detector covers a 360-degree area with a maximum range of 8 meters when installed at a height between 1.8m and 4m.

The detector has a 360° detection angle and a maximum range of 8 meters. Optimal installation height is between 1.8m and 4m. Avoid installing near heat sources, direct sunlight, or areas with significant air movement (e.g., air conditioning vents) to prevent false triggers.

7. Údržba

The SEBSON motion detector requires minimal maintenance. Ensure the sensor lens is kept clean and free from dust or obstructions. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.

8. Řešení problémů

Problém Možná příčina Řešení
Světlo se nerozsvítí.
  • Žádné napájení.
  • LUX setting too low (too dark).
  • V dosahu nebyl detekován žádný pohyb.
  • Vadné zapojení.
  • Zkontrolujte jistič a připojení.
  • Adjust LUX dial towards the sun symbol.
  • Ensure motion occurs within the detection zone.
  • Ověřte zapojení kabeláže.
Světlo svítí neustále.
  • Nepřetržitý pohyb v detekční zóně.
  • Nastavení ČASU je příliš dlouhé.
  • Chyba zapojení (např. přepnutý vodič, trvale připojený vodič).
  • Clear detection zone of constant movement.
  • Nastavte volič TIME na kratší dobu.
  • Check wiring for correct connections.
Světlo se rozsvítí bez zjevného pohybu.
  • Heat sources (e.g., heater, direct sunlight).
  • Air currents (e.g., open window, AC vent).
  • Malá zvířata.
  • Relocate detector or remove interfering objects.
  • Zajistěte stabilní prostředí.
  • Adjust sensitivity if possible (this model does not have explicit sensitivity adjustment, but careful placement can help).

9. Specifikace

Značka SEBSON
Číslo modelu IR_ES_EA
Barva Antracit
Rozměry (D x Š x V) 7.5 x 7.5 x 7.5 cm
Hmotnost 110 gramů
Typ montáže Zapuštěné (stropní)
Průměr montážního otvoru 63-66 mm
Zdroj napájení Napájení střídavým proudem
Maximální zatížení (žárovka) 2000 W
Max Load (LED/Energy Saving) 1000 W
Rozsah detekce 8 metrů
Detekční úhel 360°
Operating Duration (TIME) 10 sekund - 30 minut
Ambient Light Sensitivity (LUX) 3 - 1 000 000 luxů
Kompatibilní zařízení Basic lighting controls
Doporučená použití Residential security, commercial security, automation, energy management
Země původu Čína

10. Záruka a podpora

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official SEBSON webUschovejte si doklad o koupi pro případ reklamace.

© 2026 SEBSON. Všechna práva vyhrazena.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.