SEBSON IR_OUT_CA

SEBSON Outdoor Motion Detector IP65

Model: IR_OUT_CA

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Outdoor Motion Detector IP65. Please read this manual carefully before installation and use to ensure proper function and safety. Keep this manual for future reference.

SEBSON Outdoor Motion Detector IP65, anthracite color

Image 1: SEBSON Outdoor Motion Detector IP65 in anthracite.

2. Bezpečnostní pokyny

  • Instalaci musí provést kvalifikovaný elektrikář v souladu s místními předpisy pro elektroinstalaci.
  • Před instalací nebo údržbou se ujistěte, že je odpojeno napájení.
  • Do not exceed the maximum load capacity specified for the device.
  • This product is designed for outdoor use with an IP65 rating, protecting against dust and low-pressure water jets.
  • Avoid installing near heat sources, air conditioning units, or objects that may cause false triggers (e.g., swaying trees, reflective surfaces).

3. Vlastnosti produktu

  • Integrated with 3 sensors for precise detection of people, large animals, and vehicles.
  • IP65 protection rating for outdoor use.
  • Suitable for surface mounting on walls or ceilings.
  • Maximum load capacity: 2,000W for incandescent lamps, 1,000W for LED or energy-saving lamps.
  • Detection area: 20 meters at 360°.
  • Vertical orientation adjustable by 180°.
  • Adjustable activation duration: 10 seconds to 30 minutes, or permanent ON/OFF.
  • Adjustable ambient brightness sensor: 3-2,000 LUX.
Key features of the motion detector: 20m/360 degree detection, LED up to 1000W, IP65, 10s-30min timer, 3-2000 LUX, 230V.

Obrázek 2: Konecview of key product specifications and features.

4. Nastavení a instalace

4.1 Místo montáže

Choose a stable surface for mounting, either a wall or a ceiling. Ensure the chosen location allows for the desired detection area and is free from obstructions. The detector can be vertically oriented by 180° after installation.

Diagram showing the motion detector mounted on a wall, with an arrow indicating 180 degree vertical adjustment capability.

Image 3: Vertical adjustment range of the motion detector.

4.2 Zapojení

Connect the motion detector to the AC power supply (230V) and the light fixture according to the wiring diagram provided by a qualified electrician. Ensure all connections are secure and insulated.

4.3 Nastavení detekční oblasti

The detection range is 20m at 360°. To reduce the detection range or exclude specific areas, use the provided modified cover. Cut the cover according to the desired pattern and place it over the sensor lens.

Diagram illustrating how to cut and apply a cover to the sensor lens to modify the detection area.

Image 4: Method for adjusting the detection area using a cover.

Technical drawing showing detection patterns for wall and ceiling mounted motion detectors, indicating a 20m range and 2.2m-6m mounting height.

Image 5: Detection area diagrams for wall and ceiling mounting.

5. Návod k obsluze

5.1 Time Setting (TIME)

Use the 'TIME' knob to set the duration the light remains on after motion is detected. Settings range from 10 seconds to 30 minutes. You can also set it to permanent ON or OFF.

5.2 Light Sensitivity Setting (LUX)

Use the 'LUX' knob to adjust the ambient brightness threshold at which the motion detector activates the light. Settings range from 3 LUX (darkness) to 2,000 LUX (daylight). This allows the light to only turn on when it's dark enough.

Detailní záběr view of the 'TIME' and 'LUX' adjustment knobs on the motion detector, showing various settings.

Obrázek 6: Detailní view of TIME and LUX adjustment controls.

6. Údržba

  • Regularly clean the sensor lens with a soft, dry cloth to ensure optimal detection performance.
  • Do not use abrasive cleaners or solvents, as these can damage the device.
  • Pravidelně kontrolujte všechna elektrická připojení, zda nejsou pevně utažená a zda nevykazují známky opotřebení.
  • Uvnitř nejsou žádné součásti, které by mohl uživatel opravit. V případě potřeby opravy se obraťte na kvalifikovaný personál.

7. Řešení problémů

ProblémMožná příčinaŘešení
Světlo se nerozsvítí, když je detekován pohyb.1. Incorrect LUX setting (too high).
2. Žádné napájení.
3. Vadná žárovka.		1. Adjust LUX setting to a lower value.
2. Check power connections.
3. Vyměňte žárovku.
Světlo svítí nepřetržitě.1. TIME setting too long or set to permanent ON.
2. Constant motion in detection area.
3. Sensor obstructed or dirty.		1. Adjust TIME setting.
2. Reposition detector or adjust detection area with cover.
3. Clean sensor lens.
Světlo se rozsvítí bez zjevného pohybu.1. Environmental factors (wind, heat, small animals).
2. Sensor too sensitive.		1. Reposition detector or adjust detection area with cover.
2. Ensure no objects are causing false triggers.

8. Specifikace

  • Značka: SEBSON
  • Číslo modelu: IR_OUT_CA
  • Barva: Antracit
  • Zdroj napájení: AC (střídavý proud)
  • Hmotnost položky: 222 gramů
  • Maximální rozsah detekce: 20 metrů
  • Detekční úhel: 360°
  • Typ montáže: Surface mount (wall and ceiling)
  • Popis baterie: Baterie není součástí dodávky
  • Rozsah teplot: 20 stupňů Celsia (provozní)
  • Kompatibilní zařízení: Smart Home Hub, Light
  • Doporučená použití: Residential security, commercial sector, automation, energy management
  • Rozměry: 85x55x170mm (approximate, refer to diagram for exact measurements)
Technical drawing showing the dimensions of the SEBSON motion detector, including length, width, and height measurements.

Obrázek 7: Rozměry produktu.

9. Záruka a podpora

SEBSON products are designed for durability and performance. For warranty information or technical support, please refer to the official SEBSON webnebo se obraťte na prodejce. Uschovejte si účtenku jako doklad o koupi.

Pro další pomoc můžete navštívit SEBSON Brand Store.

© 2024 SEBSON. Všechna práva vyhrazena.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.