TOOLCY B0DMP46YD9

TOOLCY Gas Pressure Washer User Manual

Model: 3200 PSI & 2.6 GPM Gas Pressure Washer (B0DMP46YD9)

1. Úvod a produktview

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your TOOLCY Gas Pressure Washer. Designed for powerful and high-efficiency cleaning, this unit is equipped with a robust engine and an axial-cam pump, making it suitable for demanding tasks such as cleaning cars, driveways, homes, and patios.

Your TOOLCY Gas Pressure Washer delivers 3200 PSI and 2.6 GPM, ensuring superior cleaning performance with minimal effort. Its durable construction and smart features are engineered for long-lasting service and user convenience.

TOOLCY Gas Pressure Washer main unit

Obrázek 1: Hlavní view of the TOOLCY Gas Pressure Washer.

2. Bezpečnostní informace

VAROVÁNÍ: Přečtěte si všechna bezpečnostní varování a pokyny. Nedodržení varování a pokynů může vést k úrazu elektrickým proudem, požáru a/nebo vážnému zranění.

  • Vždy používejte vhodné osobní ochranné prostředky, včetně ochrany očí, ochrany sluchu a pevné obuvi.
  • Never point the spray gun at people, pets, or electrical outlets. The high-pressure spray can cause severe injury.
  • Ensure the pressure washer is on a stable, level surface during operation to prevent tipping.
  • Do not operate the pressure washer indoors or in poorly ventilated areas due to carbon monoxide fumes.
  • Before performing any maintenance or cleaning, always turn off the engine, disconnect the spark plug wire, and release any residual pressure in the system.
  • Udržujte děti a domácí zvířata mimo provozní oblast.
  • This pressure washer uses gasoline. Handle fuel with extreme care. Store gasoline in an approved container in a well-ventilated area away from ignition sources.
  • The rear-inlet system is designed to prevent tripping hazards. Always ensure hoses are properly routed.
  • The spray gun features anti-slip grips and a safety lock. Always engage the safety lock when not spraying.

3. Seznam součástí a dílů

Your TOOLCY Gas Pressure Washer comes with the following components:

  • Main Pressure Washer Unit (with 209cc OHV Engine and Axial-Cam Pump)
  • High-Pressure Hose (35 FT length)
  • Swivel Spray Gun
  • Extension Wand (21 inches)
  • 5 Pro-Grade Nozzle Tips (0°, 15°, 25°, 40°, Soap Nozzle)
  • Onboard Soap Tank (0.9 Gallons)
  • 12palcové pevné pneumatiky
  • Oil Funnel (for initial oil filling)
Close-up of the onboard soap tank

Figure 2: Integrated 0.9-gallon soap tank. Soap is not included.

Close-up of the 360-degree swivel inlet on the spray gun

Figure 3: The spray gun features a 360° swivel inlet to prevent hose kinking.

4. Pokyny k nastavení

Před prvním použitím postupujte podle těchto kroků pro počáteční nastavení:

  1. Rozbalení: Opatrně vyjměte všechny součásti z obalu. Zkontrolujte, zda nedošlo k poškození při přepravě.
  2. Sestava rukojeti: Připevněte rukojeť k hlavní jednotce pomocí dodaného spojovacího materiálu. Ujistěte se, že je bezpečně upevněna.
  3. Přidejte motorový olej: The pressure washer is shipped without engine oil. Using the provided oil funnel, add 10W-30 engine oil to the crankcase. Do not overfill. Refer to the engine manual for exact capacity.
  4. Přidat palivo: Fill the fuel tank with fresh, unleaded gasoline. Do not use E85 or other high-ethanol fuels.
  5. Připojení vysokotlaké hadice: Connect one end of the 35FT high-pressure hose to the pump outlet on the pressure washer and the other end to the swivel spray gun. Ensure connections are tight.
  6. Připojte přívod vody: Connect a standard garden hose (not included) to the water inlet on the pump. Ensure the garden hose is free of kinks and has a steady water supply.
  7. Nainstalujte trysku: Select the desired nozzle tip and insert it into the quick-connect fitting on the extension wand. Pull back the collar on the quick-connect fitting, insert the nozzle, and release the collar to lock it in place.

Video 1: This video demonstrates the ease of use and setup for the TOOLCY Gas Pressure Washer, including adding soap and cleaning various surfaces like tires and sidewalks.

5. Návod k obsluze

Before starting, ensure all connections are secure and the water supply is turned on. Never run the pump dry.

5.1 Startování motoru

  1. Otevřete palivový ventil.
  2. Move the choke lever to the "CHOKE" position (cold engine start).
  3. Set the engine switch to "ON".
  4. Pevně ​​zatáhněte za rukojeť ručního startéru, dokud motor nenaskočí.
  5. Jakmile motor nastartuje, postupně přesuňte páčku sytiče do polohy „RUN“.

5.2 Using Nozzle Tips

The 5 pro-grade nozzle tips allow for versatile cleaning applications:

  • 0° (červená): Pin-point jet for toughest stains and concentrated cleaning. Use with extreme caution.
  • 15° (žlutá): High-pressure blast for heavy-duty cleaning of hard surfaces.
  • 25° (zelená): Medium-pressure wash for general cleaning tasks.
  • 40° (bílá): Wide spray for delicate surfaces, rinsing, and light cleaning.
  • Tryska na mýdlo (černá): Low-pressure spray for applying detergent from the onboard soap tank.
Diagram showing the 5 different nozzle tips and their spray patterns

Figure 4: Understanding the different spray patterns of the 5 nozzle tips.

5.3 Aplikace čisticího prostředku

  1. Fill the onboard soap tank with pressure washer safe detergent.
  2. Attach the black soap nozzle to the spray gun.
  3. The pressure washer will automatically draw detergent when the soap nozzle is in use.
  4. Po nanesení čisticího prostředku přepněte na vysokotlakou trysku (např. 25° nebo 15°) a povrch důkladně opláchněte.
Person using the pressure washer to clean a car tire

Figure 5: The pressure washer effectively cleans vehicle tires and other surfaces.

6. Údržba

Pravidelná údržba zajistí dlouhou životnost a optimální výkon vašeho tlakového čističe.

6.1 Po každém použití

  • Turn off the engine and water supply.
  • Stiskněte spoušť stříkací pistole, abyste uvolnili zbývající tlak.
  • Disconnect all hoses and drain water from the pump and hoses.
  • Clean the nozzle tips and store them properly.
  • Wipe down the unit to remove dirt and debris.

6.2 Údržba motoru

  • Výměna oleje: Change the engine oil after the first 5 hours of use, then every 50 hours or annually, whichever comes first. Use 10W-30 engine oil.
  • Vzduchový filtr: Pravidelně kontrolujte a čistěte vzduchový filtr, zejména v prašném prostředí. Pokud je poškozený, vyměňte jej.
  • Zapalovací svíčka: Inspect the spark plug annually. Clean or replace as needed.
  • Palivový systém: Pro dlouhodobé skladování vypusťte palivovou nádrž a karburátor nebo použijte stabilizátor paliva.

6.3 Údržba čerpadla

  • Pump Saver: Use a pump saver solution before storing the unit for extended periods to prevent freezing and corrosion.
  • Vstupní filtr: Pravidelně kontrolujte a čistěte filtr přívodu vody, abyste zabránili vniknutí nečistot do čerpadla.
Close-up of the 209cc 4-stroke OHV engine

Figure 6: The powerful 209cc 4-stroke OHV engine requires regular maintenance for optimal performance.

Close-up of the improved heavy-duty axial pump

Figure 7: The maintenance-free axial-cam pump is designed for extended service life.

7. Řešení problémů

ProblémMožná příčinaŘešení
Motor se nespustíNo fuel; Engine switch OFF; Choke not set correctly; Spark plug issue; Low oil level.Add fresh fuel; Turn engine switch ON; Adjust choke; Check/replace spark plug; Fill oil to proper level.
Nízkotlaký výstupNedostatečný přívod vody; Ucpaná tryska; Vzduch v čerpadle; Opotřebované těsnění čerpadla.Ensure full water flow; Clean/replace nozzle; Purge air by running water through pump with engine off; Contact service.
Motor běží špatněZatuchlé palivo; Ucpaný palivový filtr; Znečištěný vzduchový filtr.Drain and refill with fresh fuel; Clean/replace fuel filter; Clean/replace air filter.
Z čerpadla uniká vodaUvolněné spoje; Poškozené O-kroužky/těsnění.Tighten all connections; Inspect and replace O-rings/seals if necessary.
No soap dispensingSoap tank empty; Soap nozzle not installed; Clogged soap injector.Fill soap tank; Install black soap nozzle; Clean soap injector.

If you encounter problems not listed here or require further assistance, please contact TOOLCY customer service.

8. Specifikace

FunkceDetail
ZnačkaTOOLCY
ModelB0DMP46YD9
Zdroj napájeníGas Engine Powered
Typ motoru209cc 4-stroke OHV Engine
Maximální tlak3200 PSI
Maximální průtok2.6 galonů za minutu (GPM)
Délka hadice35 stop
Délka hůlky21 palce
Objem nádrže na mýdlo0.9 galonů
Rozměry produktu18 cm D x 18 cm Š x 16 cm V
Hmotnost položky67.9 libry
BarvaGreen 35FT Hose (referring to hose color)
Bezpečnostní normyEPA, Safety Standards Met

9. Záruka a podpora

TOOLCY provides a 2-Year Limited Manufacturer Service and Parts Coverage for this gas pressure washer. This warranty covers defects in materials and workmanship under normal use.

For any item or technical problems, TOOLCY offers 24 hours of customer service on weekdaysUschovejte si prosím doklad o koupi pro případ reklamace.

Kontaktní údaje:

  • For support, please refer to the contact details provided with your product packaging or visit the official TOOLCY webmísto.
  • You can also reach out to the seller "TOOLCY" directly through the platform where you purchased the product.

© 2025 TOOLCY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.