DARKROCK Classico Max Storage Master E-ATX Computer Case Instruction Manual

1. Úvod

This manual provides detailed instructions for the assembly, operation, and maintenance of your DARKROCK Classico Max Storage Master E-ATX Computer Case. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance.

2. Klíčové vlastnosti

• Rozsáhlá podpora úložiště: Accommodates up to 10x 3.5" HDDs and 3x 2.5" SSDs, providing ampprostor pro ukládání dat.
• Vertikální montáž GPU: Features 3 vertical slots for graphics card installation, optimizing airflow and aesthetics.
• Kompatibilita základní desky: Supports E-ATX, ATX, M-ATX, and ITX motherboards. Note: Hard drive cages may need to be removed for E-ATX motherboard installation.
• Podpora pokročilého chlazení: Designed to support up to a 360mm liquid radiator in the top panel for efficient heat dissipation.
• Optimalizované proudění vzduchu: Mesh front and side panels, combined with four pre-installed 120mm fans, ensure excellent heat dissipation and maintain low internal temperatures.
• Připojení předního panelu: Includes 2x USB 3.0 ports, 2x USB 2.0 ports, and HD audio jacks for convenient peripheral access.

3. Specifikace

Image: Internal layout showing drive bay locations and case dimensions (18.3"D x 9.06"W x 18.78"H).

Image: Internal clearances for CPU cooler (max 180mm height), GPU (295mm, 400mm if drive bay removed), and motherboard sizes (E-ATX, ATX, M-ATX, ITX).

Image: Diagram illustrating liquid radiator and fan support locations (240/280/360mm liquid radiator, 140mm/120mm fans).

4. Průvodce nastavením

4.1. Příprava případu

1. Rozbalte pouzdro: Carefully remove the computer case from its packaging.
2. Odstraňte boční panely: Locate the thumbscrews on the rear of the case. Unscrew them and gently slide off the side panels. Set them aside in a safe place.
3. Zkontrolujte příslušenství: Verify all included accessories (screws, cable ties, manual) are present.

4.2. Instalace základní desky

1. Nainstalujte Standoffs: Ensure the correct motherboard standoffs are installed for your motherboard form factor (E-ATX, ATX, M-ATX, ITX). Additional standoffs may be in the accessory kit.
2. Instalace krytu I/O: Snap your motherboard's I/O shield into the rear I/O opening of the case.
3. Montáž základní desky: Carefully align your motherboard with the standoffs and I/O shield. Secure it with the provided screws.
4. E-ATX Note: For E-ATX motherboards, it may be necessary to remove the front hard drive cages to provide sufficient clearance. Refer to the specifications for exact dimensions.

4.3. Instalace disku (HDD/SSD)

• 3.5" HDD Installation: The case supports up to 10x 3.5" HDDs in dedicated drive bays. Slide the HDD into an available bay and secure it with screws.
• 2.5" SSD Installation: The case supports up to 3x 2.5" SSDs. These typically mount behind the motherboard tray or in specific 2.5" drive trays. Secure the SSD with screws.

4.4. Instalace grafické karty (GPU)

• Standartní instalace: Insert the GPU into the appropriate PCIe slot on your motherboard and secure it with the retention clip and a screw to the case.
• Vertikální instalace: The case features 3 vertical expansion slots for vertical GPU mounting. An optional PCIe riser cable (not included) is required for this configuration. Install the riser cable, then mount the GPU vertically and secure it.

4.5. Nastavení chladicího systému

• Předinstalované ventilátory: The case comes with four 120mm fans pre-installed (three front, one rear). Connect these fans to your motherboard's fan headers or the included 6x 3-pin fan hub (powered via SATA).
• Liquid Radiator Installation: The top panel supports up to a 360mm liquid radiator. Ensure adequate clearance and remove any obstructing components (e.g., top hard drive cage) if necessary.

4.6. Správa kabelů

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables. This improves airflow and maintains a clean internal appearance.

Obrázek: Rozložený view of the case showing removable panels and internal structure.

Obrázek: Zadní vnitřní view showing cable routing options and fan hub.

Image: Diagram showing the location of the four pre-installed 120mm fans and the 6x 3-pin fan hub with SATA power input.

5. Návod k obsluze

• Zapnutí/vypnutí: Use the power button located on the top front panel to turn the system on or off.
• Resetovací tlačítko: The reset button is also on the top front panel for system restarts.
• Porty na předním panelu: Connect USB devices to the USB 2.0 or USB 3.0 ports. Use the HD audio jacks for headphones and microphones.

Image: Close-up of the top front panel showing USB 3.0, USB 2.0, HD Audio, Reset, and Power buttons.

6. Údržba

• Čištění prachového filtru: The case includes dust filters on the front, top, and bottom (for PSU). Regularly remove and clean these filters to maintain optimal airflow and prevent dust buildup inside the system.
• Vnitřní čištění: Periodically open the side panels and use compressed air to remove dust from internal components, especially fans and heatsinks.

7. Řešení problémů

• Systém se nezapíná:
  • Ensure the power supply is properly connected to the wall outlet and the case.
  • Zkontrolujte všechna interní napájecí připojení (24pinový ATX, napájení CPU, napájení GPU).
  • Verify front panel power button cables are correctly connected to the motherboard.
• Žádný výstup na displej:
  • Confirm the monitor cable is connected to the graphics card, not the motherboard (if a dedicated GPU is installed).
  • Znovu vložte grafickou kartu a moduly RAM.
• Problémy s přehříváním:
  • Ensure all case fans are spinning and connected correctly.
  • Vyčistěte prachové filtry a vnitřní součásti.
  • Zkontrolujte, zda je chladič procesoru správně usazen a zda má dobrý kontakt s procesorem.
• Disk nebyl detekován:
  • Check SATA data and power cables for secure connections to both the drive and motherboard/power supply.
  • Verify the drive is enabled in the BIOS/UEFI settings.

8. Záruka a podpora

The DARKROCK Classico Max computer case comes with a 1-letá záruka od data nákupu. Tato záruka se vztahuje na výrobní vady a vady materiálu vzniklé při běžném používání.

For technical support, warranty claims, or further assistance, please visit the official DARKROCK webnebo se obraťte na jejich zákaznický servis. Uschovejte si doklad o koupi pro ověření záruky.

Official DARKROCK Store: DARKROCK Amazon Store

9. Galerie médií

Obrázek: Přední strana view of the DARKROCK Classico Max computer case.

Obrázek: Interní view of the case, highlighting its suitability for various applications like video editing, home theater, and gaming.

Image: Internal layout showing drive bay locations and case dimensions (18.3"D x 9.06"W x 18.78"H).

Image: Internal clearances for CPU cooler (max 180mm height), GPU (295mm, 400mm if drive bay removed), and motherboard sizes (E-ATX, ATX, M-ATX, ITX).

Image: Diagram illustrating liquid radiator and fan support locations (240/280/360mm liquid radiator, 140mm/120mm fans).

Image: Close-up of the top front panel showing USB 3.0, USB 2.0, HD Audio, Reset, and Power buttons.

Obrázek: Rozložený view of the case showing removable panels and internal structure.

Obrázek: Zadní vnitřní view showing cable routing options and fan hub.

Image: Diagram showing the location of the four pre-installed 120mm fans and the 6x 3-pin fan hub with SATA power input.

videa