1. Bezpečnostní informace
Please read and understand all instructions before beginning assembly and use. Failure to follow these instructions may result in serious injury. Keep these instructions for future reference.
- Během montáže uchovávejte všechny malé díly mimo dosah dětí.
- Před použitím se ujistěte, že jsou všechny šrouby a vruty bezpečně utažené. Pravidelně kontrolujte.
- Do not use power tools for assembly unless specifically instructed, as overtightening may damage components.
- Umístěte postel na rovný povrch.
- Nestůjte ani neskákejte na rám postele.
- Use only the recommended mattress size for this bed frame.
2. Obsah balení
Verify that all parts are present before assembly. If any parts are missing or damaged, contact customer support.
| Část | Popis | Množství |
|---|---|---|
| A | Čelo | 1 |
| B | Boční kolejnice | 2 |
| C | Stupačka | 1 |
| D | Dřevěné lamely | 8 |
| E | Středová podpůrná lišta | 1 |
| F | Support Legs (for center bar) | 2-3 |
| G | Metal Legs (decorative) | 4 |
| H | Sada hardwaru (šrouby, podložky, imbusový klíč) | 1 |
3. Montážní návod
Follow these steps carefully to assemble your bed frame. It is recommended to have two people for assembly.
Krok 1: Připevnění bočnic k čelu postele a nohám postele
Connect the side rails (B) to the headboard (A) and footboard (C) using the provided bolts and washers from the hardware pack (H). Do not fully tighten bolts until all parts are aligned.
Image: Bed frame structure showing headboard, footboard, and side rails connected.
Step 2: Install Center Support Bar and Legs
Attach the center support bar (E) to the pre-drilled holes on the headboard and footboard. Secure the support legs (F) to the center bar. Ensure the center bar is level and provides adequate support.
Krok 3: Umístěte dřevěné latě
Lay the wooden slats (D) across the side rails, ensuring they are evenly spaced and secured if attachment points are present. The mattress anti-displacement device should be positioned at the foot of the bed to prevent the mattress from sliding.
Image: Close-up of the wooden slats laid across the frame with the mattress anti-displacement bar in place.
Step 4: Attach Decorative Metal Legs
Screw the four decorative metal legs (G) into the designated corners of the bed frame. Once all parts are assembled, go back and fully tighten all bolts and screws.
Image: Detail of one of the golden metal legs attached to the bed frame.
4. Návod k obsluze
Once assembled, your bed frame is ready for use. Place your Queen size mattress directly onto the wooden slats. The integrated mattress anti-displacement device will help keep your mattress in place.
Image: The assembled bed frame with a mattress and bedding, ready for use.
5. Údržba
- Čištění: For the upholstered parts, gently wipe with a damp cloth and mild soap if necessary. Avoid harsh chemicals. For wooden and metal parts, wipe with a dry or slightly damp tkanina.
- Kontrola těsnosti: Periodically check all bolts and screws to ensure they remain tight. Retighten as needed to maintain stability.
- Vyhněte se přetížení: Do not exceed the recommended weight capacity of the bed frame (up to 800 pounds).
- Vystavení slunečnímu světlu: Avoid prolonged direct sunlight exposure to prevent fading of the upholstery.
6. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Postel se kymácí nebo je nestabilní. | Uvolněné šrouby nebo vruty. | Check and tighten all assembly bolts and screws. Ensure the bed is on a level surface. |
| Vrzavé zvuky. | Volné spoje nebo tření mezi součástmi. | Retighten all hardware. If squeaking persists, apply a small amount of lubricant (e.g., silicone spray) to contact points between metal parts or where slats meet the frame. |
| Matrace se sundává z rámu. | Mattress anti-displacement device not installed or improperly positioned. | Ensure the mattress anti-displacement bar is correctly installed at the foot of the bed. Verify mattress size matches the bed frame. |
7. Specifikace
- Typ produktu: Čalouněný rám postele s platformou
- Model: HRTTRRXES
- Velikost: Královna
- Barva: Světle šedá
- Výška čela postele: 56 palců
- Overall Assembled Dimensions (L x W x H): 84.65 cm x 63.80 cm x 56.00 cm
- Slats Material: Borovicové dřevo
- Materiál rámu: Solid Pine, Metal, Faux Leather Upholstery
- Nosnost: Až 800 liber
- Požadovaná montáž: Ano
Image: Detailed dimensions of the Queen size bed frame.
8. Záruka a podpora
For warranty information, missing parts, or technical support, please refer to the documentation included with your purchase or contact the manufacturer directly. Keep your purchase receipt for warranty claims.
Výrobce: Generic