Ergonomická kancelářská židle Hbada E2

Zavedení

This manual provides detailed instructions for the assembly, operation, and maintenance of your Hbada E2 Ergonomic Office Chair. Please read this manual thoroughly before assembly and use to ensure proper function and safety. Keep this manual for future reference.

Bezpečnostní informace

• Always follow the instructions provided with the chair for proper assembly and use.
• Be cautious when adjusting the chair's parts and when using the reclining function to avoid injury.
• Nepřekračujte maximální nosnost křesla.
• Ensure all screws and connections are tightened securely before use. Periodically check and re-tighten as needed.
• Během montáže držte děti a domácí zvířata v dostatečné vzdálenosti od židle.

Obsah balení

Před zahájením montáže zkontrolujte, zda jsou všechny součásti přítomny a nepoškozené. Balení by mělo obsahovat:

• Chair Base with Wheels
• Pneumatický válec
• Sedák
• Opěradlo
• Opěrka hlavy
• Područky (2)
• Opěrka nohou (pokud je součástí vašeho modelu)
• Montážní materiál (šrouby, podložky, imbusový klíč)
• Návod k použití

Image: All chair components and hardware neatly organized for assembly.

Nastavení a montáž

Assembly typically takes approximately 30 minutes. Only the provided Allen wrench is required.

1. Sestavte základnu: Attach the wheels to each leg of the chair base.
2. Vložte pneumatický válec: Place the air pneumatic cylinder into the center hole of the assembled base.
3. Připevnění opěrky nohou: Secure the footrest mechanism to the underside of the seat cushion.
4. Instalace loketních opěrek: Screw both armrests into their designated positions on the underside of the seat cushion.
5. Připojení opěradla: Attach the backrest support to the back of the seat cushion using the provided screws.
6. Combine Seat and Base: Carefully place the assembled seat and backrest onto the pneumatic cylinder, ensuring it is firmly seated.
7. Připevnění opěrky hlavy: Slide the headrest onto the top of the backrest until it clicks into place or is securely fastened.

Image: The Hbada E2 Ergonomic Office Chair fully assembled and ready for use.

Návod k obsluze a nastavení

The Hbada E2 chair offers multiple adjustment options for personalized comfort:

• Nastavení výšky židle: Pomocí páky umístěné pod sedadlem můžete židli zvednout nebo snížit do požadované výšky. Zatáhněte páku nahoru vsedě pro snížení, nebo nahoru ve stoje pro zvýšení.
• 6-Way Adjustable Lumbar Support: The lumbar support can be adjusted vertically (up to 2.36 inches), forward and backward (up to 1.97 inches), and floats 10 degrees left and right. This provides comprehensive support for your lower back.


Obrázek: Podrobný view of the 6-way adjustable lumbar support mechanism.

• 3D nastavitelné loketní opěrky: Adjust the armrests in three dimensions: height (up to 2.95 inches), forward and backward (up to 1.97 inches), and rotation (40 degrees left and right). This allows for optimal elbow and arm support.


Image: Illustration of the multi-directional adjustments for the armrests.

• 3D nastavitelná opěrka hlavy: The headrest can be adjusted vertically (up to 3.93 inches), forward and backward (up to 1.57 inches), and rotated 60 degrees to support various heights and body types, relieving neck pressure.


Image: Visual guide for adjusting the headrest for optimal neck support.

• Reclining Function with 3 Lockable Angles: The chair reclines up to 135 degrees. Use the lever to adjust and lock the tilt at 90 degrees (comfortable office), 115 degrees (leisure and entertainment), or 138 degrees (short nap).


Image: Different reclining positions of the chair for various activities.

• Opěrka nohou: If your model includes a footrest, it can be pulled out from under the seat and flipped over to provide leg support for relaxation.

Klíčové vlastnosti

• Inovativní ergonomický design: The Hbada E2 incorporates advanced technology for comfortable posture, featuring an adjustable headrest, 6-way adjustable lumbar support, 3D armrests, breathable mesh fabric, reclining function, and a gravity-sensing chassis.
• Prodyšná síťovina: The chair features a completely breathable and durable mesh design for improved air permeability and comfort, especially during long periods of use.


Image: Detail of the breathable mesh material used in the chair's construction.

• Gravity-Sensing Functional Chassis: Allows for smooth reclining at different user weights.
• Aluminum Alloy Wired Control Adjustment: Provides one-button control for adjustments without needing to bend down.


Image: Close-up of the wired control lever for convenient adjustments.

• Odolné komponenty: Features an SGS certified gas lift, PU-wrapped silent casters, and a high-load-bearing metal five-claw base for stability and longevity.


Image: Key durable components of the chair, including the gas lift, casters, and base.

• BIFMA Standard Tested: Tested for a 10-year lifespan, including 120,000 backrest push tests, 102kg backrest pull tests, 60,000 armrest adjustment tests, 120,000 times 78kg load tests, 120,000 gas lift height adjustment tests, and 100,000 caster rolling tests.


Image: Summary of durability tests passed by the chair.

Údržba

• Čištění: Wipe down mesh and plastic surfaces with a damp hadříkem a jemným mýdlem. Vyhněte se agresivním chemikáliím.
• Inspekce: Pravidelně kontrolujte všechny šrouby a vruty, zda jsou pevně utažené. V případě potřeby je dotáhněte.
• Péče o kolečka: Pro zajištění plynulého otáčení udržujte kolečka bez vlasů a nečistot.
• Plynový výtah: Do not attempt to disassemble the gas lift. If it malfunctions, contact customer support.

Odstraňování problémů

• Vrzání židle: Check and tighten all assembly screws. A small amount of silicone spray on moving parts may help.
• Židle se nedá nastavit na výšku: Ensure the pneumatic cylinder is correctly installed and the lever mechanism is functioning. If issues persist, the gas lift may need replacement.
• Kolečka se neotáčejí hladce: Clean any debris (hair, dust) from the caster wheels.
• Backrest/Armrests Feel Loose: Re-tighten the screws connecting these components to the seat.

Specifikace

Záruka a podpora

Hbada is committed to providing high-quality products and customer satisfaction. For any issues or inquiries, please contact Hbada customer support.

• Výměna dílů: Parts are replaced, not repaired.
• Zásady vrácení: 30denní lhůta pro vrácení zboží.
• Guaranteed Price: 15-day guaranteed price.
• Poškozeno při doručení: Repair and replacement guaranteed.

K dispozici je také možnost zakoupení dalších ochranných plánů, které nabízejí prodloužené krytí na 2 nebo 3 roky.