Amewi ALLRock H8 Scale Crawler Brushless 1:8 ARTR Instruction Manual

1. Úvod

The Amewi ALLRock H8 is a high-performance 1:8 scale crawler designed for demanding off-road conditions. It features premium components, including a brushless motor with intelligent torque management, a 2-speed metal gear transmission, and individually lockable differentials. This manual provides essential information for the safe and effective operation, setup, and maintenance of your ALLRock H8 crawler.

Image 1.1: The Amewi ALLRock H8 Scale Crawler, remote control, and included accessories.

2. Bezpečnostní informace

VAROVÁNÍ: Not suitable for children under 14 years of age. Use only under direct adult supervision.

• Model vždy provozujte v otevřeném prostoru, mimo dosah lidí, domácích zvířat a překážek.
• Ensure all batteries are correctly installed and charged before operation.
• Never touch moving parts during operation to avoid injury.
• Keep the model and its components away from water unless specifically designed for it (this model features IP67 water protection, but avoid submersion).
• Store the model and batteries in a cool, dry place, away from direct sunlight and heat sources.
• Disconnect batteries when not in use to prevent accidental activation.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny níže uvedené položky:

• Amewi ALLRock H8 Scale Crawler (Model 22690)
• 8-channel 2.4 GHz Remote Control
• Decorative Arch
• Nálepkový list
• Šroubovák
• Produktový manuál (tento dokument)

Požadované příslušenství (není součástí dodávky):

• 2-3S LiPo battery with XT60 connector (recommended: 3000 mAh 30C or higher)
• Compatible LiPo battery charger
• 3x AA 1.5V batteries for the remote control

4. Nastavení

4.1 Instalace baterie

1. For the Crawler: The ALLRock H8 features two battery compartments under the foldable body, secured by a central screw. Carefully lift the body to access these compartments. Install your charged 2-3S LiPo battery (with XT60 connector) into one of the compartments. The front compartment provides more output, while the rear compartment adds weight to the rear. You can also use two batteries for extended run time. Secure the body after installation.
2. Pro dálkové ovládání: Open the battery compartment on the back of the remote control. Insert 3x AA 1.5V batteries, ensuring correct polarity. Close the compartment.

Obrázek 4.1: Vnitřní view of the chassis, highlighting battery compartments and electronics.

4.2 Počáteční kontroly

• Ujistěte se, že jsou všechna připojení bezpečná.
• Verify that the steering servo operates freely and without obstruction.
• Check that the wheels are securely attached.

5. Návod k obsluze

5.1 Sekvence zapnutí/vypnutí

1. Nejprve zapněte dálkové ovládání.
2. Connect the battery to the crawler's ESC (Electronic Speed Controller).
3. Wait for the binding process to complete (indicated by LED on ESC).
4. To power off, disconnect the crawler's battery first, then turn off the remote control.

5.2 Základní ovládací prvky

• Spoušť plynu: Zatažením zrychlíte vpřed, zatlačením zabrzdíte/zpátečku.
• Volant: Pro řízení vozidla otočte doleva nebo doprava.

5.3 Pokročilé funkce

• 2stupňová převodovka: The 2-speed metal gear transmission allows switching between a powerful crawler mode and a faster driving mode. This can be controlled via a dedicated switch on the remote control.
• Lockable Differentials: The portal axles feature differentials that can be individually locked via the remote control, enhancing off-road capability.
• LED osvětlení: The integrated lighting system with 140 LEDs offers various lighting modes and can be switched via the remote control.
• Inteligentní řízení točivého momentu: The brushless ESC features intelligent torque management, providing consistent power on slopes without speed adjustments. It also includes a descent function for constant speed downhill and a sensitive hill brake.
• Ochrana proti vodě IP67: The ALLRock H8 is designed with IP67 water protection, making it suitable for use in various outdoor conditions, including wet environments.
• Programování aplikací: The ESC settings can be programmed via a smartphone application (Android, iOS) using Bluetooth connectivity.

Obrázek 5.1: Boční profesionálfile of the ALLRock H8, showcasing jeho robustní konstrukce.

Obrázek 5.2: Přední strana view, highlighting the bumper and LED light bar.

6. Údržba

Regular maintenance ensures the longevity and optimal performance of your ALLRock H8 crawler.

• Čištění: After each use, especially in dirty or wet conditions, clean the vehicle. Remove dirt, mud, and debris from the chassis, suspension, and drivetrain. Use a soft brush or compressed air. Avoid using harsh chemicals.
• Inspekce: Regularly inspect all screws, nuts, and bolts for tightness. Check the condition of the tires, shocks, and suspension links. Ensure all electrical connections are secure and free from corrosion.
• Mazání: Periodically lubricate moving parts such as gears and universal joints with appropriate RC-grade lubricant.
• Skladování: Store the model in a clean, dry, and cool environment. Remove batteries from both the crawler and the remote control during long-term storage.

Obrázek 6.1: Spodní strana view, useful for inspecting drivetrain and suspension.

7. Řešení problémů

If you encounter issues with your ALLRock H8, refer to the following common troubleshooting steps:

If problems persist after attempting these solutions, please contact Amewi customer support.

8. Specifikace

9. Záruka a podpora

For warranty information, please refer to the terms and conditions provided at the point of purchase or visit the official Amewi website. If you require technical assistance, spare parts, or have any questions not covered in this manual, please contact Amewi customer support directly. Ensure you have your model number (22690) and proof of purchase available when contacting support.