Zavedení
This manual provides essential instructions for the safe and efficient use of your LiitoKala 12V/12.8V 60Ah Lithium Iron Phosphate (LiFePO4) battery. Please read this manual thoroughly before installation, operation, or maintenance to ensure optimal performance and longevity of your battery.
Konec produktuview
The LiitoKala 12V/12.8V 60Ah LiFePO4 battery is designed for various applications including camping, golf carts, off-road vehicles, off-grid solar systems, marine use, and emergency power storage. It offers high capacity, long cycle life, and robust performance.

Obrázek 1: Přední strana view of the LiitoKala 12V 60Ah LiFePO4 battery, showing the product label with specifications and safety warnings.
Klíčové vlastnosti:
- 12.8V Nominal Voltage
- Kapacita 60 Ah
- Lithium Iron Phosphate (LiFePO4) Chemistry
- Integrated Battery Management System (BMS) for protection
- Long cycle life (4000 cycles or more)
- Široký rozsah provozních teplot
- Kompaktní a lehký design
- Vodotěsná konstrukce
Obsah balení:
- 1 x LiitoKala 12V/12.8V 60Ah LiFePO4 Battery
- 1 x Compatible Charger (as indicated by product images)
- 1 x Uživatelská příručka (tento dokument)

Figure 2: The LiitoKala 12V 60Ah LiFePO4 battery shown with its accompanying charger.
Bezpečnostní informace
Failure to follow these safety instructions can result in fire, electric shock, injury, or damage to the battery and other property.
- Nerozebírejte the battery pack. Disassembly can lead to internal damage, short circuits, and potential hazards.
- Do not open, crush, or heat the battery above 70°C (158°F). High temperatures can cause internal pressure buildup and lead to fire or explosion.
- Nezkratujte obvod the positive (+) and negative (-) terminals with metal objects. This can cause severe sparks, heat, and damage to the battery.
- Do not charge the battery if abnormal conditions are detected, such as swelling, leakage, or unusual heat. Immediately disconnect the battery if any abnormalities are observed.
- Use only the specified special charger provided with the battery or a charger explicitly approved for LiFePO4 batteries with the correct voltage a aktuální hodnocení.
- Chraňte baterii před vodou, ohněm a korozivními látkami.
- Při nabíjení nebo vybíjení baterie zajistěte dostatečné větrání.
- Baterii skladujte na chladném a suchém místě, mimo dosah přímého slunečního záření.
- Uchovávejte mimo dosah dětí.
- Refer to local regulations for proper disposal of lithium batteries.

Obrázek 3: Detailní view of the safety and specification label on the battery, emphasizing critical warnings.
Nastavení
Vybalení a kontrola:
Upon receiving your battery, carefully unpack it and inspect for any visible damage. If any damage is found, contact your supplier immediately.
Počáteční poplatek:
It is recommended to fully charge the battery before its first use. Connect the provided charger to a suitable power outlet and then connect the charger's output to the battery terminals. Ensure correct polarity (+ to + and - to -). The charging process will be indicated by the charger's status light or the battery's display.
Montáž a připojení:
Mount the battery in a secure, well-ventilated location. Ensure that the battery is protected from physical damage and extreme temperatures. Connect the battery to your system (e.g., camping car, golf cart, solar inverter) using appropriate gauge cables and connectors. Always ensure correct polarity. It is recommended to install an appropriate fuse or circuit breaker in the positive line close to the battery.

Obrázek 4: Strana view of the battery, highlighting the positive and negative terminals for connection.
Návod k obsluze
Sledování stavu baterie:
The LiitoKala 12V/12.8V 60Ah battery features an integrated display that shows the current voltage and state of charge (%). This allows for easy monitoring of the battery's performance.

Figure 5: The battery's digital display indicating voltage a účtovat procentatage.
Nabíjení:
Connect the charger to the battery terminals, ensuring correct polarity. The battery's internal Battery Management System (BMS) will manage the charging process, protecting against overcharge. Disconnect the charger once the battery is fully charged or if the display indicates 100%.
Vybíjení:
Connect your load to the battery terminals, observing correct polarity. The BMS will protect the battery from over-discharge. It is recommended to avoid consistently discharging the battery to its absolute minimum voltage to maximize cycle life.
Údržba
Pravidelná kontrola:
Periodically inspect the battery terminals for corrosion or loose connections. Ensure the battery casing is clean and free from damage. Clean terminals with a wire brush if necessary and ensure connections are tight.
Skladování:
If storing the battery for an extended period, ensure it is charged to approximately 50-70% of its capacity. Store in a cool, dry place between -20°C and 45°C. Avoid storing in direct sunlight or extreme temperatures. Recharge the battery every 3-6 months during long-term storage to prevent deep discharge.
Čištění:
Vyčistěte baterii casing s měkkým, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no moisture enters the terminals or display area.
Odstraňování problémů
- Baterie se nenabíjí:
- Zkontrolujte připojení nabíječky a napájení.
- Verify charger is compatible and functioning correctly.
- Ujistěte se, že jsou svorky baterie čisté a připojení bezpečná.
- If the battery is deeply discharged, it might require a specific recovery charge from a compatible charger.
- Battery not providing power:
- Check connections to the load.
- Verify the load is within the battery's continuous discharge current limit (50A).
- Check the battery's state of charge on the display. If low, recharge the battery.
- The internal BMS may have activated protection (e.g., over-discharge, over-current, over-temperature). Disconnect the load, allow the battery to rest, and then attempt to reconnect.
- Neobvyklé teplo nebo zápach:
- Okamžitě odpojte baterii od všech zátěží a nabíječek.
- Move the battery to a safe, non-flammable area.
- Kontaktujte zákaznickou podporu.
Specifikace
| Parametr | Hodnota |
|---|---|
| Značka | LiitoKala |
| Model | 12V 60Ah battery pack |
| Jmenovitý svtage | 12.8V |
| Kapacita | 60Ah |
| Maximální nabíjecí proud | 10A |
| Instantaneous Discharge Current | 100A |
| Trvalý vybíjecí proud | 50A |
| Život cyklu | 4000 cyklů nebo více |
| Teplota nabíjení | 0~45 °C |
| Výstupní teplota | -20~60°C |
| Skladovací teplota | -20~65°C |
| Hmotnost | Přibližně 6 kg |
| Rozměry (D x Š x V) | 260 × 170 × 215 mm (26 × 17 × 21.5 cm) |
| Provozní svtage Dosah | 14.6V-10V |
| Ochrana proti přebití Voltage | 14.6V±0.05V |
| Ochrana proti nadměrnému vybití Voltage | 10V±0.05V |
| Ochrana teploty baterie | 60 °C ± 5 °C |

Figure 6: Dimensional drawing of the battery.
Záruka a podpora
Specific warranty information for this product is not provided in the available data. Please refer to your purchase documentation or contact the seller (YIZHIHUA1) directly for details regarding warranty coverage and support.
For technical assistance or inquiries, please contact the manufacturer or your point of purchase.