VIAIR 400P-RV EF Enhanced Flow Portable Air Compressor Instruction Manual

1. Bezpečnostní informace

Read and understand all safety instructions before operating the VIAIR 400P-RV EF Portable Air Compressor. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Kompresor provozujte vždy v dobře větraném prostoru.
• Do not operate the compressor near flammable liquids or gases.
• Ensure the compressor is securely placed on a stable, level surface during operation.
• Při provozu kompresoru používejte vhodné ochranné brýle.
• Udržujte děti a přihlížející mimo dosah běžícího kompresoru.
• Disconnect power before performing any maintenance or when the compressor is not in use.
• Tento výrobek obsahuje chemikálie, o kterých je ve státě Kalifornie známo, že způsobují rakovinu a vrozené vady nebo jiné poškození reprodukce. Po manipulaci si umyjte ruce.

2. Konec produktuview

The VIAIR 400P-RV EF is a 12-volt portable air compressor designed for inflating RV, trailer, SUV, and Jeep tires. It features an enhanced flow design for improved performance and heat dissipation.

Image 2.1: The VIAIR 400P-RV EF Portable Air Compressor shown with its included accessories, including the coiled air hose, inflation gun, and power cables.

Klíčové vlastnosti:

• Enhanced Flow Design: Offers 10% faster fill rate and 20% higher performance compared to previous models.
• Všestranný výkon: Pre-installed 2-pin SAE connector for compatibility with various power adapters, including VIAIR's 7-way Trailer Plug.
• RV-Specific Components: Includes a gas station-style inflation gun with a 160 PSI gauge, 45-degree extended reach chuck for dual rear wheels, and a 40-inch 90-degree twist-on chuck.
• Vysoká kapacita: 150 PSI maximum pressure, 100% duty cycle at 40 PSI, and 2.59 CFM free flow capacity.
• Odolný a stabilní: Features an I-Beam sand tray for reduced vibration and enhanced stability. IP54 rated for dust and water spray protection.

Co je v krabici:

Image 2.2: A visual representation of the items included in the product packaging, showing the compressor, hoses, inflation gun, and carry bag.

• 400P EF RV Portable Tire Inflator
• Gas Station Style Inflation Gun with 160 PSI Gauge
• 45-Degree Dually Chuck
• 40-inch 90-Degree Twist-On Chuck
• (2) 30 ft Coiled Air Hoses (total 60 ft reach)
• SAE Battery Clamps
• Durable Dual Compartment Carry Bag
• 3 Inflation Tips
• Presta Valve Adapter for bikes

3. Nastavení

1. Umístění kompresoru: Place the compressor on a stable, level surface near the tire to be inflated. Ensure it is away from dirt, dust, and moisture.
2. Připojte napájení:
   • Attach the SAE battery clamps to your vehicle's 12V battery terminals. Connect the red clamp na kladný (+) terminál a černý třamp na záporný (-) terminál.
   • Alternatively, if your vehicle is equipped, connect the pre-installed 2-pin SAE connector to a compatible power adapter, such as VIAIR's 7-way Trailer Plug adapter (sold separately).

   Důležité: Ensure your vehicle's engine is running to provide adequate power to the compressor and prevent battery drain.
3. Připojení vzduchové hadice: Connect one end of a coiled air hose to the compressor's air outlet. Connect the other end of the coiled air hose to the inflation gun. If more reach is needed, connect the second coiled air hose in series.
4. Attach Chuck: Select the appropriate chuck (45-degree dually chuck or 40-inch 90-degree twist-on chuck) for your tire valve and attach it to the inflation gun.

4. Provoz

1. Zapnutí: Locate the ON/OFF switch on the compressor and turn it to the 'ON' position. The compressor will pressurize the hose to 150 PSI and then turn off automatically.
2. Připojení k ventilku pneumatiky: Securely attach the selected chuck to the tire's valve stem. Ensure a tight seal to prevent air leakage.
3. Nafouknout pneumatiku: Pull the trigger on the inflation gun to begin inflating the tire. The pressure gauge on the inflation gun will display the current tire pressure.
4. Monitorovací tlak: Continuously monitor the pressure gauge. Release the trigger periodically to check the static tire pressure. Inflate to the recommended PSI for your tire, typically found on the vehicle's door jamb or owner's manual.
5. Odpojit: Once the desired pressure is reached, release the trigger, turn the compressor OFF, and disconnect the chuck from the tire valve.
6. Opakovat: Repeat the process for all other tires requiring inflation.

Image 4.1: A user demonstrating the inflation process, holding the inflation gun with the pressure gauge connected to a tire valve.

The VIAIR 400P-RV EF is capable of filling a 275/80/22.5 tire from 80 to 90 PSI in approximately 1 minute and 52 seconds.

5. Údržba

• Čištění: After each use, wipe down the compressor and accessories with a clean, damp tkanina. Nepoužívejte agresivní chemikálie nebo abrazivní čisticí prostředky.
• Skladování: Store the compressor and all accessories in the provided heavy-duty carrying bag in a cool, dry place, away from direct sunlight and extreme temperatures.
• Zkontrolujte hadice a spoje: Regularly inspect air hoses for cracks, kinks, or damage. Check all connections for tightness. Replace damaged components immediately.
• Vzduchový filtr: Periodically check the air filter for dirt and debris. Clean or replace as necessary to maintain optimal performance.

6. Řešení problémů

7. Specifikace

8. Informace o záruce

The VIAIR 400P-RV EF Portable Air Compressor comes with a One Year Limited Warranty. Please refer to the warranty card included with your product for specific terms and conditions. Retain your proof of purchase for warranty claims.

9. Zákaznická podpora

For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please visit the official VIAIR webnebo kontaktujte jejich oddělení zákaznických služeb. Kontaktní informace obvykle naleznete na obalu produktu nebo na webových stránkách výrobce. webmísto.

Můžete také navštívit VIAIR Store on Amazon pro více informací o produktu a zdroje podpory.