MVMT Chrono II Men's Chronograph Watch

Zavedení

Thank you for choosing the MVMT Chrono II Men's Chronograph Watch. This manual provides essential information for the proper setup, operation, and maintenance of your timepiece. The Chrono II features a robust design with lumi-filled hands, sharp angular lugs, applied faceted indices, and a stepped chamfered case. It is designed for everyday use with a water resistance rating of 5 ATM.

Obrázek: Přední strana view of the MVMT Chrono II Chronograph Watch with a white dial and cognac tan leather strap.

Začínáme

Nastavení popruhu

The MVMT Chrono II features a Tang Buckle clasp. To adjust the strap, simply slide the strap through the buckle and secure the pin into the desired hole for a comfortable fit on your wrist.

Obrázek: Zadní view of the watch displaying the Tang Buckle clasp and the leather strap.

Průvodce velikostí zápěstí

Refer to the sizing guide to understand how different watch sizes appear on various wrist dimensions. This helps in achieving an optimal fit.

Image: A visual guide illustrating various watch diameters (24mm, 34mm, 38mm, 40mm, 42mm, 48mm) as they would appear on 6-inch and 7-inch wrists.

Nastavení času a data

Your MVMT Chrono II watch is equipped with a crown and two pushers for setting functions.

Obrázek: Boční view of the watch highlighting the crown (center) and the two chronograph pushers (top and bottom).

1. Nastavení času:
   • Vytáhněte korunku do polohy 2 (nejdále ven).
   • Turn the crown to move the hour and minute hands to the correct time.
   • Zatlačte korunku zpět do polohy 0 (normální provozní poloha) pro spuštění hodinek.
2. Nastavení data:
   • Vytáhněte korunku do polohy 1 (první cvaknutí).
   • Otáčejte korunkou pro nastavení data.
   • Zatlačte korunku zpět do polohy 0.

   Poznámka: Avoid setting the date between 9 PM and 3 AM, as this can interfere with the date change mechanism.

Použití funkce chronografu

Funkce chronografu umožňuje měřit uplynulý čas.

1. Start: Press the top pusher to start the chronograph (the large second hand and sub-dials will begin moving).
2. Stop: Press the top pusher again to stop the chronograph and read the elapsed time.
3. Resetovat: After stopping, press the bottom pusher to reset all chronograph hands to their zero positions.

Poznámka: Ensure the chronograph is reset to zero before starting a new measurement for accurate readings.

Pokyny pro odolnost proti vodě

Your MVMT Chrono II watch is water resistant up to 5 ATM (50 meters). This rating indicates that the watch is suitable for everyday use and can withstand brief submersion in water, such as showering or swimming in shallow water. It is ne suitable for diving or high-impact water sports.

• 5 ATM / 50 Meters: Suitable for showering and swimming.
• Vyhněte se: Hot water, steam, or operating the crown/pushers while the watch is wet, as this can compromise the water seal.

Image: A visual guide explaining different levels of watch water resistance (3 ATM, 5 ATM, 10 ATM, 20 ATM) and their corresponding activities.

Péče a údržba

• Čištění: Wipe the watch case and strap regularly with a soft, dry cloth to remove dirt and oils. For the ceramic bracelet, a slightly damp Lze použít hadřík a poté nechat uschnout.
• Vyhněte se chemikáliím: Do not expose your watch to harsh chemicals, solvents, or detergents, as these can damage the case, strap, or seals.
• Extrémní teploty: Avoid sudden temperature changes or prolonged exposure to extreme heat or cold, which can affect the watch's accuracy and seals.
• Výměna baterie: The watch is powered by a quartz movement. When the battery needs replacement, it is recommended to take it to a qualified watchmaker or an authorized service center to ensure proper sealing and function.

Odstraňování problémů

• Hodinky neběží:
  • Check if the crown is pushed all the way in (position 0).
  • The battery may need replacement. Refer to the 'Care and Maintenance' section.
• Ručičky chronografu se neresetují na nulu:
  • Ensure the chronograph is stopped before pressing the reset pusher.
  • If the issue persists, a recalibration or service may be required.
• Datum se nemění:
  • Verify the time is set correctly (AM/PM). The date typically changes around midnight.
  • Nenastavujte datum mezi 21:00 a 3:00.

Specifikace

Záruka a podpora

Your MVMT Chrono II watch comes with a Dvouletá záruka od data nákupu. Tato záruka se vztahuje na výrobní vady vzniklé při běžném používání. Nevztahuje se na škody způsobené nesprávným zacházením, nehodami, neoprávněnými opravami nebo běžným opotřebením.

For warranty claims, service, or technical support, please contact MVMT customer service through their official website or the retailer where the watch was purchased. Please retain your proof of purchase for warranty validation.