1. Nastavení
Carefully remove the watch from its packaging. Inspect the watch for any visible damage. Ensure all protective films are removed from the watch face and case back.
1.1 Počáteční vinutí
As an automatic watch, the MVMT Classic II is powered by the motion of your wrist. If the watch has stopped, it may require an initial manual wind. Gently rotate the crown clockwise about 20-30 times while it is in the first (normal) position. This will build up a power reserve. The watch will then continue to wind itself with regular wear.
1.2 Nastavení času
To set the time, gently pull the crown (the knob on the side of the watch) out to the second position. Rotate the crown clockwise or counter-clockwise to adjust the hour and minute hands. Once the correct time is set, push the crown back in fully to ensure water resistance and to start the watch.
Obrázek: Boční view of the MVMT Classic II watch, highlighting the crown used for winding and setting the time.
1.3 Nastavení náramku
The stainless steel bracelet can be adjusted to fit your wrist. This typically involves removing or adding links. For precise adjustment, it is recommended to visit a professional jeweler or watch repair service. Improper adjustment can damage the bracelet or watch.
2. Ovládání hodinek
2.1 Automatický pohyb
The MVMT Classic II features a Japanese Miyota 82SO automatic movement. This movement is self-winding, meaning it harnesses the kinetic energy from your wrist's natural motion to power the watch. Regular daily wear will keep the watch wound and running accurately.
2.2 Rezerva chodu
When fully wound, the watch has a power reserve that allows it to continue running for a period even when not being worn. If the watch is left unworn for an extended period and stops, simply follow the initial winding instructions in Section 1.1.
Image: The MVMT Classic II watch worn on a wrist, demonstrating its intended use.
2.3 Voděodolnost
The watch is water resistant up to 5 ATM (50 meters). This rating indicates that the watch is suitable for everyday use, such as splashes, rain, and brief immersion in water. It is not designed for swimming, showering, or diving. Always ensure the crown is fully pushed in before any contact with water to maintain its water resistance.
3. Údržba
3.1 Čištění
To clean your watch, wipe the case and bracelet with a soft, damp cloth. For stubborn dirt on the stainless steel, a mild soap solution can be used, followed by thorough rinsing with a damp cloth and drying. Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the watch's finish.
3.2 Skladování
Pokud hodinky nepoužíváte, skladujte je na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot. Originální krabička na hodinky poskytuje vynikající ochranu.
Image: The MVMT watch box, suitable for safe storage of the timepiece.
3.3 Profesionální servis
Automatic movements benefit from periodic professional servicing, typically every 3-5 years, to ensure optimal performance and longevity. Consult an authorized watch service center for maintenance.
Obrázek: Zpět view of the MVMT Classic II watch, showcasing the exhibition caseback and movement details.
4. Řešení problémů
- Hodinky neběží: Ensure the watch has been sufficiently wound (refer to Section 1.1) and that the crown is fully pushed in. If the watch has been stationary for a long time, it may require more movement or manual winding to restart.
- Časová nepřesnost: Mechanical watches, including automatic movements, may exhibit slight variations in timekeeping. If the inaccuracy is significant or sudden, ensure the watch has a sufficient power reserve. If issues persist, professional servicing may be required.
- Kondenzace pod krystalem: If you notice condensation inside the watch crystal, it indicates a potential breach in the water resistance. This requires immediate attention from a professional watch repair service to prevent damage to the movement.
5. Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | 28000440 |
| Hnutí | Japanese Miyota 82SO Automatic |
| Průměr pouzdra | 42 mm |
| Voděodolnost | 5 ATM / 50 Meters |
| Materiál pouzdra | Nerez |
| Materiál sklo | Zpevněný minerální krystal |
| Typ spony | Push Button Deployment Clasp |
| Rozměry balení | 6.1 x 3.7 x 2.6 palce |
| Hmotnost položky | 6.24 unce |
6. Záruka a podpora
6.1 Two-Year Guarantee
The MVMT Classic II watch comes with a two-year guarantee from the date of purchase, covering manufacturing defects. This warranty does not cover normal wear and tear, accidental damage, or damage resulting from improper use or unauthorized repairs.
6.2 Zákaznická podpora
For warranty claims, service requests, or any questions regarding your MVMT Classic II watch, please contact MVMT customer support. You can find contact information and further details on the official MVMT webwebu nebo návštěvou MVMT Store on Amazon.
