BSMOOM 7000A Jump Starter & 150 PSI Air Compressor Kit User Manual

1. Bezpečnostní informace

Před použitím tohoto výrobku si prosím přečtěte všechna bezpečnostní varování a pokyny. Nedodržení varování a pokynů může vést k úrazu elektrickým proudem, požáru a/nebo vážnému zranění.

• Ne nastartování zamrzlé baterie pomocí kabelu.
• Ne Pokud jsou kabely nebo CL poškozené, použijte startovací kabel.amps jsou poškozeny.
• Ensure proper polarity: Připojte červenou třamp na kladný (+) terminál a černý třamp to the negative (-) terminal. Reverse polarity can cause damage.
• Odstraňte třamps promptly: Odpojte třamps from the vehicle battery immediately after the engine starts.
• Drž se dál od dětí: Toto zařízení není hračka.
• Provozní teplota: Use the device within the specified temperature range (-4°F to 140°F).
• Větrání: Ensure adequate ventilation when operating the air compressor.
• Ochranné vlastnosti: The device is equipped with multiple protections including over-current, over-temperature, over-voltage, no spark, over-charge, over-discharge, short-circuit, anti-interference, reverse polarity, and low-temperature protection.

Image: BSMOOM Jump Starter with multiple safety protections. This image highlights the advanced safety features of the BSMOOM jump starter, including over-current, over-temperature, over-voltage, no spark, over-charge, over-discharge, short-circuit, anti-interference, reverse polarity, and low-temperature protection.

2. Konec produktuview & Komponenty

The BSMOOM 7000A Jump Starter & 150 PSI Air Compressor Kit is a versatile device designed for emergency vehicle starting, tire inflation, and portable power supply.

2.1 Co je v krabici

Image: Contents included in the BSMOOM Jump Starter and Air Compressor Kit. This image displays all items included in the product box: the BSMOOM jump starter unit, smart jumper clamps, air hose, various air nozzles, USB charging cable, and the user manual.

• BSMOOM 7000A Jump Starter Unit
• Smart Jumper Clamps (červená pro kladný pól, černá pro záporný)
• Air Hose with Quick Connector
• Various Air Nozzles (for different inflatables)
• Nabíjecí kabel USB-C
• Uživatelská příručka
• Skladovací pouzdro

2.2 Vlastnosti produktu

• Špičkový proud 7000 A: Capable of starting all gas engines and up to 10.0L diesel engines.
• Vzduchový kompresor 150 PSI: Cordless inflator with tire pressure detection for various inflatables.
• Powerbanka 26800mAh: Dual USB-A outputs and one USB-C input/output for charging digital devices.
• 3.4" LCD displej: Clear display for battery status, pressure readings, and operational modes.
• Dvojité LED osvětlení: Features Normal, SOS, and Strobe modes for emergency illumination.
• Pokročilá bezpečnostní opatření: 10 types of protection for safe operation.
• Provoz za každého počasí: Designed to function in extreme temperatures from -4°F to 140°F.

Image: BSMOOM 7000A Jump Starter and Air Compressor Kit with accessories. This image displays the BSMOOM 7000A Jump Starter and Air Compressor Kit, including the main unit, heavy-duty jumper clamps (red and black), the flexible air hose with various nozzles, USB charging cables, and a compact carrying case.

Image: Key features of BSMOOM Powerful Car Jump Starter. This graphic highlights key features of the BSMOOM jump starter: 24 months standby time, 99Wh power, LCD screen, 2024 full chip upgrade, 3 LED modes, 10 protection mechanisms, and one-second startup capability.

2.3 Ovládací panel a porty

Image: BSMOOM Jump Starter control panel and button functions. An illustration detailing the control panel of the BSMOOM jump starter, showing the functions of each button: Preset Air Pressure Up, Mode/Unit Switching, Power/Inflate Start, Light, and Preset Air Pressure Decrease.

• LCD displej: Shows battery level, pressure, and mode.
• Tlačítko „M“: Mode/Unit Switching (e.g., PSI, BAR, KPA).
• "OK" Button: Power/Inflate Start.
• Light Button (*): Activates LED flashlight modes (Normal, SOS, Strobe).
• Tlačítko „+“: Preset Air Pressure Increase.
• Tlačítko „-“: Preset Air Pressure Decrease.
• Port pro spuštění Jump Start: For connecting smart jumper clamps.
• Přípojka vzduchové hadice: For connecting the air hose.
• Výstupní porty USB-A (x2): Pro nabíjení externích zařízení.
• USB-C Input/Output Port (x1): For charging the jump starter or external devices.

3. Nastavení

3.1 Nabíjení startovacího zařízení

Before first use, fully charge the BSMOOM jump starter. It is recommended to charge the device every 3-6 months to maintain battery health, even when not in use.

1. Connect the provided USB-C charging cable to the USB-C input/output port on the jump starter.
2. Připojte druhý konec kabelu USB-C k nástěnnému adaptéru USB (není součástí balení) nebo k napájenému portu USB.
3. The LCD display will show the charging status. The battery indicator will fill up as it charges.
4. Nabíjení je dokončeno, když indikátor baterie ukazuje plnou kapacitu.

4. Návod k obsluze

4.1 Startování vozidla skokem

Ensure the jump starter is sufficiently charged (at least 50% battery recommended).

1. Krok 1: Zasuňte modrý konektor inteligentní propojkyamps into the jump start port on the BSMOOM unit. Ensure it is fully inserted.
2. Krok 2: Připojte červený (+) třamp to the positive terminal of the vehicle's battery. Connect the black (-) clamp k zápornému pólu baterie vozidla.
3. Krok 3: Po připojení se chytrá klávesniceamps will indicate readiness (e.g., a solid green light or specific display on the unit). Turn on your vehicle's engine.
4. Krok 4: Immediately after the engine starts, remove the clamps from the vehicle battery. First, remove the black (-) clamp, pak červená (+) clamp. Disconnect the smart clampz jednotky startovacího kabelu.

Image: BSMOOM Jump Starter connected to a car battery for emergency starting. An illustration demonstrating the BSMOOM jump starter connected to a car battery, highlighting its capability to start various vehicles including those with 12V, all gas, and 10L diesel engines.

Image: Step-by-step guide for jump starting a car with BSMOOM Jump Starter. A four-step visual guide detailing the quick start car procedure: 1. Insert the starting cable into the starter. 2. Connect the clamps to the car's battery. 3. Turn on the engine. 4. Remove the clamps immediately after starting.

4.2 Používání vzduchového kompresoru

1. Connect the air hose to the air hose port on the jump starter unit.
2. Attach the appropriate nozzle to the air hose for the item you wish to inflate (e.g., tire valve, ball needle).
3. Connect the nozzle to the item. The LCD display will show the current pressure.
4. Press the "M" button to select the desired unit (PSI, BAR, KPA).
5. Pomocí tlačítek „+“ a „-“ nastavte požadovaný cílový tlak.
6. Press the "OK" button to start inflation. The compressor will automatically stop when the target pressure is reached.
7. Odpojte trysku a vzduchovou hadici.

Image: BSMOOM Jump Starter's air compressor inflating a car tire. The BSMOOM device is shown actively inflating a car tire, emphasizing its ultra-fast 150 PSI cordless inflation feature with tire pressure detection. It indicates inflation times for different PSI levels.

Image: BSMOOM Air Pump inflating various items. The image demonstrates the versatility of the BSMOOM 150 PSI ultra-fast inflation wireless digital air pump, showing its use for inflating car tires, motorcycle tires, bicycle tires, and sports balls.

4.3 Použití jako powerbanky

1. Connect your digital device's charging cable to one of the USB-A output ports or the USB-C input/output port on the jump starter.
2. Connect the other end of the cable to your digital device.
3. Startovací baterie automaticky začne nabíjet vaše zařízení.

Image: BSMOOM Jump Starter used as a power bank to charge mobile devices. This image illustrates the BSMOOM jump starter functioning as a power bank, charging a smartphone and tablet via its USB-A and USB-C output ports, suitable for various digital devices.

4.4 Používání LED svítilny

1. Press the Light button (*) once to turn on the flashlight in Normal mode.
2. Press the Light button (*) again to cycle through modes: SOS → Strobe → Off.

Image: BSMOOM Jump Starter's bright LED flashlight with SOS and Strobe modes. A visual representation of the BSMOOM jump starter's integrated bright LED flashlight, showcasing its 400-Lumen output and three modes: Normal, SOS, and Strobe, useful for emergencies.

5. Údržba

• Nabíjení: Pro prodloužení životnosti baterie dobíjejte startovací zařízení každé 3–6 měsíců, i když se nepoužívá.
• Čištění: Přístroj otřete suchým, měkkým hadříkem. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky.
• Skladování: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its carrying case for protection.
• Péče o kabely: Inspect jumper cables and air hose for any damage before each use.

6. Řešení problémů

7. Specifikace

Image: BSMOOM Jump Starter operating in extreme temperatures. This image illustrates the BSMOOM jump starter's capability to operate reliably in extreme weather conditions, from 140°F (hot) to -4°F (cold).

8. Záruka a podpora

BSMOOM is committed to providing high-quality products and excellent customer service.

• 12 Months Product Quality Commitment: Your purchase is covered by a 12-month quality commitment from the date of purchase.
• 30 Days Unconditional Return Policy: You may return the product within 30 days of purchase for any reason.
• Zákaznická podpora 24/7: For any questions, concerns, or support needs, please contact BSMOOM customer service. We aim to provide a quick reply within 24 hours.

For support, please refer to the contact information provided with your product packaging or visit the official BSMOOM webmísto.