Návod k použití

1. Úvod

This instruction manual provides detailed information for the installation, maintenance, and troubleshooting of the replacement accessory kit compatible with Xiaomi Robot Vacuum S20 and D106 models. This kit is designed to maintain the optimal performance of your robot vacuum cleaner.

Obrázek 1: Kompatibilita nadview for Xiaomi Robot Vacuum S20 and D106.

2. Komponenty produktu

Náhradní sada obsahuje následující komponenty:

• 2 x Main Brushes (Roller Brushes)
• 6 x Boční kartáče
• 6 x HEPA filtry
• 6 x utěrky na mop

Obrázek 2: Přesview of all included replacement parts.

3. Instalační příručka

Before installing any new components, ensure your robot vacuum cleaner is powered off and unplugged from its charging base.

3.1 Main Brush Installation

1. Otočte robotický vysavač dnem vzhůru.
2. Locate the main brush cover, usually secured by latches or screws.
3. Open or unscrew the cover and remove the old main brush.
4. Vyčistěte veškeré nečistoty z prostoru pro kartáče.
5. Vložte nový hlavní kartáč a ujistěte se, že konce jsou zarovnány s drážkami.
6. Close the main brush cover and secure it.

Figure 3: Main brush component.

3.2 Instalace bočního kartáče

1. Otočte robotický vysavač dnem vzhůru.
2. Vyhledejte boční kartáče. Obvykle jsou upevněny jedním šroubem.
3. Odšroubujte a vyjměte starý boční kartáč.
4. Align the new side brush with the screw hole.
5. Zajistěte nový boční kartáč šroubem.

Figure 4: Side brush components.

3.3 Instalace HEPA filtru

1. Otevřete přihrádku na prach robotického vysavače.
2. Odstraňte popelnici.
3. Locate the filter within the dustbin and remove the old HEPA filter.
4. Clean the dustbin thoroughly.
5. Insert the new HEPA filter into the designated slot in the dustbin.
6. Reinstall the dustbin into the robot vacuum.

Figure 5: HEPA filter components.

3.4 Mop Cloth Installation

1. Locate the mop cloth attachment on your robot vacuum. This may be a separate water tank or a dedicated mop plate.
2. Remove the old mop cloth, typically attached via Velcro or a sliding mechanism.
3. Attach the new mop cloth, ensuring it is securely fastened and covers the entire mop area.
4. If applicable, fill the water tank before reattaching the mop module to the robot.

Figure 6: Mop cloth component.

4. Provozní aspekty

Once the replacement parts are installed, your robot vacuum cleaner should operate as usual. It is recommended to run a test cleaning cycle to ensure all components are functioning correctly. The new parts are designed to restore optimal cleaning performance, including efficient dust removal and effective floor mopping.

5. Údržba

Regular maintenance of these replacement parts will extend their lifespan and ensure consistent cleaning performance.

• Hlavní kartáč: Periodically remove the main brush and clean any tangled hair or debris. The main brush is designed to be easily removable for cleaning.
• Boční kartáče: Check side brushes for wear or damage. Remove any hair or debris that may have accumulated around the base. Replace if bristles are bent or worn.
• HEPA filtr: Tap the filter gently to remove dust. The HEPA filters can be washed with water and air-dried for reuse. Ensure the filter is completely dry before reinserting it into the dustbin.
• Mopovací hadřík: After each mopping cycle, remove the mop cloth and wash it. It can be hand-washed or machine-washed. Allow it to air dry completely before reattaching.

6. Řešení problémů

If you encounter issues after replacing components, consider the following:

• Snížený čisticí výkon: Ensure all brushes are installed correctly and free from obstructions. Check if the HEPA filter is clean and properly seated.
• Neobvyklé zvuky: Verify that the main brush and side brushes are securely installed and not obstructed by foreign objects.
• Mop Not Wetting Floor: Ensure the mop cloth is properly attached and the water tank (if applicable) is filled. Check for any blockages in the water dispensing mechanism of your robot vacuum.
• Nepadnoucí díly: Double-check that your robot vacuum model is indeed Xiaomi S20 or D106. These parts are specifically designed for these models.

7. Specifikace

Figure 7: Component dimensions.

Celková hmotnost soupravy: Přibližně 7.2 uncí (204 gramů)

8. Záruka a podpora

All products are tested before shipping to ensure quality. This product is a compatible spare part and not an original Xiaomi product. For any inquiries or support regarding this replacement kit, please refer to the seller's contact information on the platform where the purchase was made.